StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

2-Phenylpropanal → 5-{1-[(5-Benzyl-1,3-thiazol-2-yl)(methyl)sulfonimidoyl]ethyl}-2-(trifluoromethyl)pyridine

HRID 1895576
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1895576
Br[CH:2]([CH2:5][C:6]1[CH:11]=[CH:10][CH:9]=[CH:8][CH:7]=1)[CH:3]=O.BrC1(Br)C(=O)NC(=O)NC1=O.C1(C(C)C=O)C=CC=CC=1.[CH3:33][S:34](=[O:51])([CH:39]([C:41]1[CH:42]=[N:43][C:44]([C:47]([F:50])([F:49])[F:48])=[CH:45][CH:46]=1)[CH3:40])=[N:35][C:36]([NH2:38])=[S:37]>C(OCC)C.CCO>[CH2:5]([C:2]1[S:37][C:36]([N:35]=[S:34]([CH:39]([C:41]2[CH:46]=[CH:45][C:44]([C:47]([F:48])([F:49])[F:50])=[N:43][CH:42]=2)[CH3:40])([CH3:33])=[O:51])=[N:38][CH:3]=1)[C:6]1[CH:11]=[CH:10][CH:9]=[CH:8][CH:7]=1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 71462-PhenylpropanalHCID 948775,5-Dibromobarbituric acidHCID 113902282-Bromo-3-phenylpropanal2×HCID 44199436N-(methyl(oxo){1-[6-(trifluoromethyl)-3-pyridinyl]ethyl}-lambda6-sulfanylidene)thiourea

Produkt 1

HCID 871418265-{1-[(5-Benzyl-1,3-thiazol-2-yl)(methyl)sulfonimidoyl]ethyl}-2-(trifluoromethyl)pyridine

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 702EthanolLösungsmittel2×HCID 3283Diethyl EtherLösungsmittel

Versuchsvorschrift

Preparation of 2-bromo-3-phenylpropanal: dibromobarbituric acid (1.43 g, 5 mmol) was dissolved in diethylether (40 mL) and phenylpropionaldehyde (1.34 g, 1.33 mL, 10 mmol) was added. After stirring at room temperature for 5 days, precipitation of barbituric acid was observed. The reaction mixture was filtered and washed with sat. aq. NaHCO3 (1×40 mL), and brine (2×40 mL). The mixture was dried over Na2SO4, filtered, and the solvent was removed under reduced pressure. GC-MS analysis of the concentrate showed 2-bromo-3-phenylpropanal as the sole product. (2) Preparation of (61): N-(methyl(oxo){1-[6-(trifluoromethyl)-3-pyridinyl]ethyl}-λ6-sulfanylidene)thiourea (J) (100 mg, 0.321 mmol) was suspended in EtOH (1 mL) and 2-bromo-3-phenylpropanal (82 mg, 0.385 mmol, 1.2 eq) in EtOH (0.6 mL) was added. The reaction was stirred at r.t. for 1 h, and then heated to reflux for 30 min. The solvent was removed under reduced pressure and the residue purified by preparative reverse-phase column chromatography (water/acetonitrile). 5-{1-[(5-benzyl-1,3-thiazol-2-yl)(methyl)sulfonimidoyl]ethyl}-2-(trifluoromethyl)pyridine (61) was obtained in form of a yellowish oil (26 mg, 0.061 mmol, 19%) as a racemate and 1:1 mixture of diastereomers. 1H-NMR (CDCl3, 400 MHz): δ=1.89 (d, J=7.2 Hz, 1.5H, CHCH3, diastereomer 1); 1.92 (d, J=7.2 Hz, 1.5H, CHCH3, diastereomer 2); 3.09 (s, 1.5H, S—CH3, diastereomer 1); 3.20 (s, 1.5H, S—CH3, diastereomer 2); 3.94 (s, 1H, CH2Ph, diasteromer 1), 3.97 (s, 1H, CH2Ph, diasteromer 2); 5.14 (q, J=7.2 Hz, 0.5H, CHCH3, diastereomer 1); 5.21 (q, J=7.2 Hz, 0.5H, CHCH3, diastereomer 2); 6.90 (s, 0.5H, thiazole, diastereomer 1); 6.92 (s, 0.5H, thiazole, diastereomer 2); 7.15-7.37 (m, 5H, Ph); 7.71 (d, J=8.2 Hz, 0.5H, pyr-C3-H, diastereomer 1), 7.72 (d, J=8.2 Hz, 0.5H, pyr-C3-H, diastereomer 2); 8.09 (dd, 3J=8.2 Hz, 4J=1.8 Hz, 0.5H, pyr-C4-H, diastereomer 1); 8.12 (dd, 3J=8.2 Hz, 4J=1.7 Hz, 0.5H, pyr-C4-H, diastereomer 2); 8.75 (d, 4J=1.8 Hz, 0.5H, pyr-C6-H, diastereomer 1); 8.79 (d, 4J=1.8 Hz, 0.5H, pyr-C6-H, diastereomer 2); 13C-NMR (CDCl3, 100 MHz): δ=13.8, 14.2 (CHCH3, two diastereomers); 33.2. 33.3 (CH2Ph, two diastereomers); 36.5, 36.8 (S—CH3, two diastereomers); 60.8, 61.6 (CHCH3, two diastereomers); 119.5, 119.6 (pyr-C, 2 diastereomers); 125.6, 125.7 (Ph, two diastereomers), 127.2, 127.3 (Ph, two diastereomers, 127.5 (Ph, two diastereomers), 130.1, 130.2 (pyr-C, two diastereomers), 131.1, 131.5, (pyr-C, two diastereomers), 132.7, 133.2 (thiazole, two diastereomers), 137.3, 137.6 (pyr-C, 2-diastereomers); 137.9, 138.0 (thiazole, two diastaereomers); 149.2, 149.4 (pyr-C, 2-diastereomers); 165.6, 165.8 (thiazole, two diastereomers); CF3, not detected. UPLC-MS (ESI+): mass calc'd for C19H19F3N3OS2 (M+H+): 426.1, found 426.1, UPLC-MS (EST) mass calc'd for C19H17F3N3OS2 (M−H+): 424.1, found 424.1.

Aufarbeitung

  1. customprecipitation of barbituric acid
  2. filtrationThe reaction mixture was filtered
  3. washwashed with sat. aq. NaHCO3 (1×40 mL), and brine (2×40 mL)
  4. dry with materialThe mixture was dried over Na2SO4
  5. filtrationfiltered
  6. customthe solvent was removed under reduced pressure
  7. custom(2) Preparation of (61)
  8. stirringThe reaction was stirred at r.t. for 1 h
  9. temperatureheated
  10. temperatureto reflux for 30 min
  11. customThe solvent was removed under reduced pressure
  12. customthe residue purified by preparative reverse-phase column chromatography (water/acetonitrile)

Quellen und Nachweise

ORD-Eintrag
ord-067b52a6404e4f8487b0eadf2b8bef60
Quelldatensatz
uspto-grants-2013_08
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08513462B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion