StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Pyridine → 3-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid

HRID 1931467
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1931467
F[C:2]([N:7]([CH3:9])C)(F)[CH:3]([F:5])[F:4].B(F)(F)F.[N:14]1C=CC=C[CH:15]=1.CO[CH:22]=[CH:23][C:24]([O:26]C)=[O:25].[OH-].[Na+].[CH3:30][NH:31]N>C(OCC)C.O1CCOCC1.O>[F:5][CH:3]([F:4])[C:2]1[C:23]([C:24]([OH:26])=[O:25])=[CH:22][N:14]([CH3:15])[N:7]=1.[F:4][CH:3]([F:5])[C:2]1[N:7]([CH3:9])[N:31]=[CH:30][C:23]=1[C:24]([OH:26])=[O:25]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

11

Edukt 6

HCID 1049PyridineHCID 6061MethylhydrazineHCID 6356Boron trifluoride2×HCID 14798Sodium HydroxideHCID 2724617Methyl 3-methoxyprop-2-enoateHCID 21945697Ethanamine, 1,1,2,2-tetrafluoro-N,N-dimethyl-

Produkt 2

HCID 18983008
3-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid
HCID 509890165-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 962WaterLösungsmittel2×HCID 3283Diethyl EtherLösungsmittelHCID 312751,4-DioxaneLösungsmittel

Reaktionsbedingungen

Temperatur
60 °C

Versuchsvorschrift

To a solution of 1,1,2,2-tetrafluoroethyldimethylamine (30 g, 207 mmol) in diethyl ether (90 ml) and dioxane (90 ml) was added dropwise, under a nitrogen atmosphere, at a temperature of from 0 to 5° C., a solution of BF3-etherate (49% BF3, 59.6 ml, 420 mmol). After the addition had ended, the reaction mixture was stirred for 5 min. Subsequently, pyridine (15.9 g, 201 mmol) and methyl 3-methoxyacrylate (22.3 g, 186 mmol) were successively added dropwise to the reaction mixture at a temperature of from 0 to 5° C. After stirring for 6 hours, a greasy solid formed, from which the supernatant solution was decanted off and discarded. The solid was then added at a temperature of from 0 to 5° C. to a mixture of sodium hydroxide (41.4 g, 1.035 mol) and methylhydrazine (38.6 g of a 35% aqueous solution, 288 mmol) in water (665 ml) and then stirred at room temperature for 1 h. Subsequently, the reaction mixture was heated to 60° C. and stirred at this temperature for 0.5 h. The reaction mixture was freed of volatile constituents. The resulting residue was taken up in water (50 ml), washed with ethyl acetate and then brought to a pH of 2 with conc. hydrochloric acid. The solid precipitated at a temperature of 0° C. was isolated by filtration, washed with a little ice-cold water and dried under reduced pressure at a temperature of 40° C. 3-Difluoromethyl-1-methylpyrazole-4-carboxylic acid was obtained as a mixture with 5-difluoromethyl-1-methylpyrazole-4-carboxylic acid with a ratio of 85:15 in an amount of 10.1 g.

Aufarbeitung

  1. additionAfter the addition
  2. stirringAfter stirring for 6 hours
  3. customa greasy solid formed, from which the supernatant solution
  4. customwas decanted off
  5. stirringstirred at room temperature for 1 h
  6. stirringstirred at this temperature for 0.5 h
  7. washwashed with ethyl acetate
  8. customThe solid precipitated at a temperature of 0° C.
  9. customwas isolated by filtration
  10. washwashed with a little ice-cold water
  11. customdried under reduced pressure at a temperature of 40° C

Quellen und Nachweise

ORD-Eintrag
ord-6e3a9bfdce81485d9371c31b5c941269
Quelldatensatz
uspto-grants-2012_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08188295B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion