StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Dimethylformamide → 6-Fluoro-3-((2-methoxyethoxy)methoxy)-2-(trifluoromethyl)pyridine

HRID 2077624
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 2077624
[F-].[K+].CN(C=O)C.C[Si](C)(C)[C:10]([F:13])([F:12])[F:11].[F:16][C:17]1[N:22]=[C:21](I)[C:20]([O:24][CH2:25][O:26][CH2:27][CH2:28][O:29][CH3:30])=[CH:19][CH:18]=1>CN1C(=O)CCC1.[Cu]I.ClCCCl>[F:16][C:17]1[N:22]=[C:21]([C:10]([F:13])([F:12])[F:11])[C:20]([O:24][CH2:25][O:26][CH2:27][CH2:28][O:29][CH3:30])=[CH:19][CH:18]=1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

8

Edukt 4

HCID 6228DimethylformamideHCID 522689Potassium FluorideHCID 552549(Trifluoromethyl)trimethylsilaneHCID 866280056-Fluoro-2-iodo-3-((2-methoxyethoxy)methoxy)pyridine

Produkt 1

HCID 670975666-Fluoro-3-((2-methoxyethoxy)methoxy)-2-(trifluoromethyl)pyridineAusbeute 65 %

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)KatalysatorHCID 111,2-DichloroethaneLösungsmittelHCID 13387N-methyl-2-pyrrolidoneLösungsmittel

Versuchsvorschrift

A dry 25 mL was charged with potassium fluoride (1.0 g, 18 mmol), copper(I) iodide (3.4 g, 18 mmol) and a stirbar. The flask was evacuated to <1 mm Hg and the solid was heated using a 170° C. oil bath for 2 h. The flask was cooled to room temperature and the vacuum was released with nitrogen. The flask was fitted with a septa/inert atmosphere inlet. The solids were treated with 5 mL freshly distilled DMF, trimethyl(trifluoromethyl)silane (2.7 ml, 18 mmol), and a solution of 6-fluoro-2-iodo-3-((2-methoxyethoxy)methoxy)pyridine (3.90 g, 12 mmol) in 5 mL dry NMP. The reaction was stirred at room temperature for 16 h, and then poured onto 150 mL dry DCE. The slurry was stirred for 1 h, and then filtered through a 0.22 μm PTFE membrane. The solids were washed with DCE (2×50 mL), and the combined DCE filtrates were concentrated in vacuo. The residue was taken up in 250 mL dry EtOH, and cooled using an ice-water bath. The slurry was filtered through a pad of Celite® (diatomaceous earth), and concentrated in vacuo to afford ˜7 mL of sample (in NMP). The sample was loaded onto a Waters Xterra Prep C18 MS Packed by Vydac/The Separations Group (50 mm×300 mm, PN PA0000-050730, 10 μm particle size, spherical shape; gradient: 0→4 min@20 mL/min, 40% B; 4→5 min, 20→100 mL/min@ 40% B; 5→25 min@100 mL/min, linear gradient to 70% B; 25→35 min@100 mL/min, isocratic at 70% B; 35 min, step to 100% B @100 mL/min; 35→50 min@100 mL/min, 100% B; 50 min, step to 40% B @ 100 mL/min; 60 min end. A fraction that eluted from 19.3 to 21.7 minutes was isolated. The solvent was removed in vacuo to afford 6-fluoro-3-((2-methoxyethoxy)methoxy)-2-(trifluoromethyl)pyridine (2.0964 g, 65% yield). 1H NMR (400 MHz, chloroform-d) δ ppm 3.36 (s, 3H) 3.52-3.59 (m, 2H) 3.84-3.90 (m, 2H) 5.35 (s, 2H) 7.10 (ddd, J=8.95, 3.77, 0.59 Hz, 1H) 7.86 (ddd, J=9.00, 6.06, 0.59 Hz, 1H). 19F NMR (376 MHz, chloroform-d) δ ppm −75.45 (dd, J=6.50, 3.90 Hz, 1 F) −66.65 (s, 3 F). 13C NMR (101 MHz, chloroform-d) δ ppm 58.91 (s, 1 C) 68.32 (s, 1 C) 71.30 (s, 1 C) 113.61 (q, J=1.01 Hz, 1 C) 114.00 (d, J=0.87 Hz, 1 C) 120.73 (qd, J=274.47, 1.52 Hz, 1 C) 133.80 (dq, J=35.26, 13.00 Hz, 1 C) 149.84 (d, J=5.20 Hz, 1 C) 156.28 (dq, J=238.58, 1.00, 0.87 Hz, 1 C). HPLC-MS: 2.04 min (>99%@215 nm; >99% @254 nm; m/z=270.0, calculated for C10H11F4NO3+H+=270.1).

Aufarbeitung

  1. customThe flask was evacuated to <1 mm Hg
  2. temperaturethe solid was heated
  3. customusing a 170° C.
  4. customfor 2 h
  5. customThe flask was fitted with a septa/inert atmosphere inlet
  6. stirringThe slurry was stirred for 1 h
  7. filtrationfiltered through a 0.22 μm PTFE membrane
  8. washThe solids were washed with DCE (2×50 mL)
  9. concentrationthe combined DCE filtrates were concentrated in vacuo
  10. temperaturecooled
  11. filtrationThe slurry was filtered through a pad of Celite® (diatomaceous earth)
  12. concentrationconcentrated in vacuo
  13. customto afford ˜7 mL of sample (in NMP)
  14. custom0→4 min@20 mL/min, 40% B
  15. custom4→5 min, 20→100 mL/min
  16. custom5→25 min@100 mL/min, linear gradient
  17. custom25→35 min@100 mL/min
  18. custom35 min, step
  19. custom35→50 min@100 mL/min, 100% B
  20. custom50 min, step
  21. custom60 min end
  22. washA fraction that eluted from 19.3 to 21.7 minutes
  23. customwas isolated
  24. customThe solvent was removed in vacuo

Quellen und Nachweise

ORD-Eintrag
ord-c84e4db1f9a34d6ea972c7c3f83aa60a
Quelldatensatz
uspto-grants-2011_04
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07928140B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion