StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Sodium Iodide → HCID 43509650, Verbindung

HRID 2241780
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 2241780
[CH3:1][N:2]1[CH2:8][CH2:7][CH2:6][N:5]([CH2:9][CH2:10][CH2:11][CH2:12][O:13]C2C=C(C=CN=2)C#N)[CH2:4][CH2:3]1.CN1CCCNCC1.ClCCCCO.C([O-])([O-])=O.[K+].[K+].[Na+].[I-]>C(O)CCC.O>[CH3:1][N:2]1[CH2:8][CH2:7][CH2:6][N:5]([CH2:9][CH2:10][CH2:11][CH2:12][OH:13])[CH2:4][CH2:3]1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

8

Edukt 5

HCID 5238Sodium IodideHCID 11430Potassium CarbonateHCID 135694-Chloro-1-butanolHCID 2283491-MethylhomopiperazineHCID 68637367HCID 68637367, Verbindung

Produkt 1

HCID 43509650HCID 43509650, Verbindung

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 2631-ButanolLösungsmittelHCID 962WaterLösungsmittel

Reaktionsbedingungen

Temperatur
95 °C

Versuchsvorschrift

2-[4-(4-Methyl-[1,4]diazepan-1-yl)-butoxy]-isonicotinonitrile. To a solution of 1-methyl-[1,4]diazepane (21.3 g, 185 mmol, 2.0 equiv) and 4-chloro-butan-1-ol (10.0 g, 92.6 mmol, 1.0 equiv) in 1-butanol (200 mL) were added K2CO3 (38.0 g, 278 mmol, 3.0 equiv) and NaI (13.9 g, 92.6 mmol, 1.0 equiv). The mixture was warmed to 95° C. and stirred for 36 h. The mixture was then cooled to rt, diluted with water, and extracted with chloroform (3×100 mL). The combined extracts were washed with brine, dried (MgSO4), filtered, and concentrated. Purification by Method 2 afforded 9.3 g of 4-(4-methyl-[1,4]diazepan-1-yl)-butan-1-ol with a small unidentified impurity. A portion of the impure alcohol (5.0 g) was dissolved in DMF (50 mL) and cooled to 0° C. Sodium hydride (60% dispersion in oil, 1.29 g, 32.2 mmol, 1.2 equiv) was added. The mixture was warmed to rt, stirred for 1 h, and then re-cooled to 0° C. A solution of 2-chloro-isonicotinonitrile (3.72 g, 26.8 mmol, 1.0 equiv) in DMF (25 mL) was added dropwise. The mixture was stirred at rt for 18 h, then was diluted with water (25 mL) and satd. aq. NaHCO3 (100 mL), and was extracted with chloroform (3×100 mL). The combined extracts were washed with brine, dried (Na2SO4), filtered and concentrated. Purification by Method 2 afforded the title compound (1.0 g). MS (electrospray): mass calculated for C16H24N4O, 288.20; m/z found, 289.4 [M+H]+. 1H NMR (400 MHz, CDCl3): 8.28 (dd, J=4.4 Hz, 0.8 Hz, 1H), 7.05 (dd, J=3.9, 1.1 Hz, 1H) 6.96 (s, 1H), 4.33 (t, J=6.6 Hz, 2H), 2.75-2.68 (m, 4H), 2.65-2.57 (m, 4H), 2.56-2.49 (m, 2H), 2.35 (s, 3H), 1.84-1.74 (m, 4H), 1.66-1.55 (m, 2H). B. 5-Fluoro-4-methyl-2-{2-[4-(4-methyl-[1,4]diazepan-1-yl)-butoxy]-pyridin-4-yl}-1H-benzoimidazole. To a stirred solution of 2-[4-(4-methyl-[1,4]diazepan-1-yl)-butoxy]-isonicotinonitrile (1.0 g, 3.47 mmol, 1.0 equiv) in toluene (5.0 mL) at 0° C. was added 1.0 M diisobutylaluminum hydride in toluene (5.2 mL, 5.2 mmol, 1.5 equiv). After 3 h, methanol (9 mL) and 1.0 M H2SO4 (10 mL) were added. The mixture was stirred for 30 min, and then 1.0 M NaOH (10 mL) was added, followed by satd. aq. sodium potassium tartrate (40 mL) and dichloromethane (100 mL). After stirring for 30 min, the mixture was extracted with chloroform (3×50 mL) and the combined extracts were washed with brine, dried (Na2SO4), filtered, and concentrated. The residue was partially purified by Method 2 to afford 268 mg of a mixture of 2-[4-(4-methyl-[1,4]diazepan-1-yl)-butoxy]-pyridine-4-carbaldehyde and several other unidentified products. A portion of the impure 2-[4-(4-methyl-[1,4]diazepan-1-yl)-butoxy]-pyridine-4-carbaldehyde (63 mg), 4-fluoro-3-methyl-benzene-1,2-diamine (30.3 mg), and Na2S2O5 (53.4 mg) were stirred in DMF (3 mL) at 90° C. for 18 h. The reaction mixture was loaded directly on silica gel and purified by Method 2, which afforded 5.0 mg of the title compound. MS (electrospray): mass calculated for C23H30FN5O, 411.24; m/z found, 412.5 [M+H]+. 1H NMR (400 MHz, CD3OD): 8.27 (dd, J=4.8, 0.5 Hz, 1H), 7.63 (dd, J=4.0, 1.4 Hz, 1H), 7.52-7.40 (m, 2H), 7.10-7.01 (m, 1H), 4.27 (t, J=6.3 Hz, 2H), 2.86-2.77 (m, 4H), 2.77-2.68 (m, 4H), 2.65-2.57 (m, 2H), 2.53 (s, 3H), 2.37 (s, 3H), 1.90-1.66 (m, 6H).

Aufarbeitung

  1. temperatureThe mixture was then cooled to rt
  2. extractionextracted with chloroform (3×100 mL)
  3. washThe combined extracts were washed with brine
  4. dry with materialdried (MgSO4)
  5. filtrationfiltered
  6. concentrationconcentrated
  7. customPurification by Method 2

Quellen und Nachweise

ORD-Eintrag
ord-1f633caa43f24f8796fcfd0bd482a84c
Quelldatensatz
uspto-grants-2010_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07723527B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion