Hydrochloric Acid → 6-Chloro-5-(4-(1-hydroxy-2-methylpropan-2-yl)phenyl)-1H-indazole-3-carboxylic acid

HRID 338477Notizen

Reaktionsgleichung

Reaktionsgleichung von HRID 338477
Br[C:2]1[CH:7]=[CH:6][C:5]([C:8]([CH3:12])([CH3:11])[CH2:9][OH:10])=[CH:4][CH:3]=1.CC1(C)COB(B2OCC(C)(C)CO2)OC1.C([O-])(=O)C.[K+].Br[C:35]1[CH:36]=[C:37]2[C:41](=[CH:42][C:43]=1[Cl:44])[NH:40][N:39]=[C:38]2[C:45]([OH:47])=[O:46].C(=O)([O-])[O-].[K+].[K+].Cl>O1CCOCC1.C1C=CC(P(C2C=CC=CC=2)[C-]2C=CC=C2)=CC=1.C1C=CC(P(C2C=CC=CC=2)[C-]2C=CC=C2)=CC=1.Cl[Pd]Cl.[Fe+2].O.CCO>[Cl:44][C:43]1[CH:42]=[C:41]2[C:37]([C:38]([C:45]([OH:47])=[O:46])=[N:39][NH:40]2)=[CH:36][C:35]=1[C:2]1[CH:7]=[CH:6][C:5]([C:8]([CH3:12])([CH3:11])[CH2:9][OH:10])=[CH:4][CH:3]=1

Komponenten

11

Edukt 6

HCID 313Hydrochloric AcidHCID 11430Potassium CarbonateHCID 517044Potassium AcetateHCID 2734316Bis(neopentyl glycolato)diboronHCID 128051244-Bromo-beta,beta-dimethylbenzeneethanolHCID 866987915-bromo-6-chloro-1H-indazole-3-carboxylic acid

Produkt 1

HCID 866988136-Chloro-5-(4-(1-hydroxy-2-methylpropan-2-yl)phenyl)-1H-indazole-3-carboxylic acidAusbeute 20,2 %

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 44119782Bis(cyclopenta-1,4-dien-1-yl(diphenyl)phosphane);dichloropalladium;iron(2+)Katalysator2×HCID 702EthanolLösungsmittelHCID 962WaterLösungsmittelHCID 312751,4-DioxaneLösungsmittel

Reaktionsbedingungen

Temperatur
130 °C

Versuchsvorschrift

A suspension of 2-(4-bromophenyl)-2-methylpropan-1-ol (168 mg, 0.73 mmol), 5,5,5′,5′-tetramethyl-2,2′-bi-1,3,2-dioxaborinane (275 mg, 0.81 mmol), [1,1′-bis(diphenylphosphino)ferrocene]dichloropalladium(II) (30 mg, 0.037 mmol) and potassium acetate (216 mg, 2.20 mmol) in 1,4-dioxane (2 mL) was sealed in a pressure tube and heated to 130° C. for 1 hour. To the mixture was added 5-bromo-6-chloro-1H-indazole-3-carboxylic acid (100 mg, 0.36 mmol), [1,1′-bis(diphenylphosphino)ferrocene]dichloropalladium(II) (14.7 mg, 0.018 mmol), 2N aqueous potassium carbonate solution (0.5 mL, 1.0 mmol) and EtOH (2 mL). The reaction mixture was sealed and heated to 130° C. for 1 hour. Water (3 mL) was added to the reaction mixture, followed by 1N HCl solution to adjust the pH to 2. The layers were separated and the aqueous layer was extracted with EtOAc (3×5 mL). The combined organic layers were dried over Na2SO4 and concentrated in vacuo. The crude material was purified by reverse phase HPLC (Column: Waters XBridge C18 19×100 mm, 5 μm; Mobile phase A: 0.03% NH4OH in water (v/v); Mobile phase B: 0.03% NH4OH in MeCN (v/v); 90.0% H2O/10.0% MeCN linear to 70.0% H2O/30.0% MeCN in 8.5 min, 70.0% H2O/30.0% MeCN linear to 0% H2O/100% MeCN in 0.5 min HOLD at 0% H2O/100% MeCN from 9.0 to 10.0 min. Flow: 25 mL/min) to afford the title compound (25.1 mg, 20% yield). MS (ES+) 345.1 (M+H)+. Retention time=1.59 minutes (Column: Waters XBridge dC18 4.6×50 mm, 5 μm; Mobile phase A: 0.03% NH4OH in water (v/v); Mobile phase B: 0.03% NH4OH in MeCN (v/v); Gradient: 95:5 A:B linear to 5:95 A:B in 4.0 min, hold at 5:95 A:B to 5.0 min. Flow: 2 mL/min).

Aufarbeitung

  1. customwas sealed in a pressure tube
  2. customThe reaction mixture was sealed
  3. temperatureheated to 130° C. for 1 hour
  4. customThe layers were separated
  5. extractionthe aqueous layer was extracted with EtOAc (3×5 mL)
  6. dry with materialThe combined organic layers were dried over Na2SO4
  7. concentrationconcentrated in vacuo
  8. customThe crude material was purified by reverse phase HPLC (Column: Waters XBridge C18 19×100 mm, 5 μm; Mobile phase A: 0.03% NH4OH in water (v/v); Mobile phase B: 0.03% NH4OH in MeCN (v/v); 90.0% H2O/10.0% MeCN linear to 70.0% H2O/30.0% MeCN in 8.5 min, 70.0% H2O/30.0% MeCN linear to 0% H2O/100% MeCN in 0.5 min HOLD at 0% H2O/100% MeCN from 9.0 to 10.0 min. Flow: 25 mL/min)

Quellen und Nachweise

ORD-Eintrag
ord-a7018ff0d761451b9dbaaf1b128e34c3
Quelldatensatz
uspto-grants-2014_11
Patentnummer
US08889730B2

Notizen zur Reaktion

Wird geladen…