StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Acetic Acid → (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehyde

HRID 447433
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 447433
[N:1]1[CH:6]=[CH:5][CH:4]=[C:3](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([C:18]#N)=[CH:15][CH:16]=3)[NH:11][N:10]=2)[CH:2]=1.CC(O)=[O:22].CN(C=O)C.[PH2]([O-])=O.[Na+]>N1C=CC=CC=1.O.[Ni]>[N:1]1[CH:6]=[CH:5][CH:4]=[C:3](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([CH:18]=[O:22])=[CH:15][CH:16]=3)[NH:11][N:10]=2)[CH:2]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

8

Edukt 4

HCID 176Acetic AcidHCID 6228DimethylformamideHCID 66734132(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrileHCID 178527019HCID 178527019, Verbindung

Produkt 1

HCID 86651944(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehydeAusbeute 50 %

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 935
Nickel
Katalysator
HCID 962WaterLösungsmittel3×
HCID 1049PyridineLösungsmittel

Reaktionsbedingungen

Temperatur
0 °C

Versuchsvorschrift

To a suspension of (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrile (984 mg, 3 mmol) in pyridine (30 mL) was added HOAc (8 mL), followed by DMF (30 mL). The resulting mixture was heated and sonicated to make a clear solution. After cooling to 0° C., a solution of sodium hypophosphite (1.408 g, 16 mmol) in H2O (8 mL) was added, followed by Raney-Nickel 2400 (slurry in H2O, 0.8 mL). The resulting mixture was heated at 60° C. (oil temp.) for 1 h before cooling to rt. H2O (50 mL) was added and the mixture was extracted with EtOAc (100 mL+50 mL×2). The combined extracts were dried (Na2SO4). Removal of low boiling point solvents gave a yellow solution in DMF (30 mL); H2O (500 mL) was added with swirling and a yellow precipitate formed. After standing 10 min, the resulting precipitate was collected by suction filtration, rinsed with H2O and dried under high vacuum to give the title compound (500 mg, 50%) as a yellow solid. 1H NMR (400 MHz, DMSO-d6) δ 13.79 (s, 1H, NH), 10.14 (s, 1H, CHO), 8.90 (s, 1H), 8.48 (d, J=4.8 Hz, 1H), 8.39 (d, J=8.0 Hz, 1H), 8.19 (d, J=9.2 Hz, 1H, partially overlapping with the singlet at 8.18 ppm), 8.18 (s, 1H, partially overlapping with the doublet at 8.19 ppm), 7.75 (d, J=16.4 Hz, 1H), 7.69 (d, J=8.4 Hz, 1H), 7.59 (d, J=16.8 Hz, 1H), 7.43 (dd, J=8.0 Hz, 5.2 Hz, 1H); MS ESI 250.0 [M+H]+, calcd for [C15H11N3O+H]+ 250.1.

Aufarbeitung

  1. temperatureThe resulting mixture was heated
  2. customsonicated
  3. temperatureThe resulting mixture was heated at 60° C. (oil temp.) for 1 h
  4. temperaturebefore cooling to rt
  5. extractionthe mixture was extracted with EtOAc (100 mL+50 mL×2)
  6. dry with materialThe combined extracts were dried (Na2SO4)
  7. customRemoval of low boiling point solvents
  8. customgave a yellow solution in DMF (30 mL)
  9. customa yellow precipitate formed
  10. filtrationthe resulting precipitate was collected by suction filtration
  11. washrinsed with H2O
  12. customdried under high vacuum

Quellen und Nachweise

ORD-Eintrag
ord-952265988c9b44629a4700e60cfcc71f
Quelldatensatz
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08481525B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion