Reaktionsgleichung
CO.C[O-].[Na+].[C:6](I)([C:9]([C:12]([C:15]([C:18]([C:21]([C:24]([C:27]([F:30])([F:29])[F:28])([F:26])[F:25])([F:23])[F:22])([F:20])[F:19])([F:17])[F:16])([F:14])[F:13])([F:11])[F:10])([F:8])[F:7]>O>[CH:6]([C:9]([C:12]([C:15]([C:18]([C:21]([C:24]([C:27]([F:28])([F:29])[F:30])([F:25])[F:26])([F:22])[F:23])([F:20])[F:19])([F:17])[F:16])([F:14])[F:13])([F:11])[F:10])([F:8])[F:7]Komponenten
Edukt 3
Produkt 1
Reagenzien, Katalysatoren, Lösungsmittel 1
Versuchsvorschrift
Into a 500 cc four-necked equipped with a stirrer, a reflux condenser, a dropping funnel and a thermometer, 200 cc of methanol and 32.4 g (0.6 mol) of sodium methoxide were charged. The reactor was heated to bring the internal temperature to 60° C. Then, 273 g of (0.5 mol) of C8F17I was dropwise added thereto over a period of one hour. After completion of the dropwise addition, heating and refluxing were continued for 10 hours. The conversion at that time was 99.8%. The reactor was cooled to room temperature. Then, 300 g of water was added to dissolve precipitated potassium iodide. The crude reaction solution was separated into two layers, and the fluorocarbon layer (lower layer) was further washed with 300 g of water to obtain 201 g of C8F17H having a purity of 99.4%. In the reactor, no formation of tar was observed.
Aufarbeitung
- customInto a 500 cc four-necked equipped with a stirrer, a reflux condenser, a dropping funnel
- temperatureThe reactor was heated
- customto 60° C
- additionAfter completion of the dropwise addition
- temperatureheating
- temperaturerefluxing
- waitwere continued for 10 hours
- dissolutionto dissolve
- customprecipitated potassium iodide
- customThe crude reaction solution
- customwas separated into two layers
- washthe fluorocarbon layer (lower layer) was further washed with 300 g of water
Quellen und Nachweise
- ORD-Eintrag
- ord-00562ed35dad4109b64de54373779ed5
- Quelldatensatz
- uspto-grants-1997_04
- Patentnummer
- US05618986
Verknüpfte Notizen
Wird geladen…