StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Pyridine → 6-chloro-2-[3-chloro-(3-chloro-2-pyridinyl)-1H-pyrazol-5-yl]-8-methyl-4H-3,1-benzoxazin-4-one

HRID 61960
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 61960
CS(Cl)(=O)=O.[Cl:6][C:7]1[CH:11]=[C:10]([C:12]([OH:14])=O)[N:9]([C:15]2[C:20]([Cl:21])=[CH:19][CH:18]=[CH:17][N:16]=2)[N:8]=1.N1C=CC=CC=1.[NH2:28][C:29]1[C:37]([CH3:38])=[CH:36][C:35]([Cl:39])=[CH:34][C:30]=1[C:31](O)=[O:32]>C(#N)C.O>[Cl:39][C:35]1[CH:36]=[C:37]([CH3:38])[C:29]2[N:28]=[C:12]([C:10]3[N:9]([C:15]4[C:20]([Cl:21])=[CH:19][CH:18]=[CH:17][N:16]=4)[N:8]=[C:7]([Cl:6])[CH:11]=3)[O:14][C:31](=[O:32])[C:30]=2[CH:34]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 1049Pyridine2×HCID 31297Methanesulfonyl chloride2×HCID 116440442-Amino-5-chloro-3-methylbenzoic acid2×HCID 211073323-Chloro-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxylic acid2×

Produkt 1

HCID 211133906-chloro-2-[3-chloro-(3-chloro-2-pyridinyl)-1H-pyrazol-5-yl]-8-methyl-4H-3,1-benzoxazin-4-one

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 962WaterLösungsmittelHCID 6342AcetonitrileLösungsmittel4×

Reaktionsbedingungen

Temperatur
-5 °C

Versuchsvorschrift

Methanesulfonyl chloride (1.0 mL, 1.5 g, 13 mmol) was dissolved in acetonitrile (10 mL), and the mixture was cooled to −5° C. A solution of 3-chloro-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxylic acid (i.e. the carboxylic acid product of Example 3, Step D) (2.58 g, 10 mmol) and pyridine (1.4 mL, 1.4 g, 17 mmol) in acetonitrile (10 mL) was added dropwise over 5 minutes at −5 to 0° C. A slurry formed during the addition. The mixture was stirred 5 minutes at this temperature, and then 2-amino-3-methyl-5-chlorobenzoic acid (i.e. the product from Example 1, Step A) (1.86 g, 10 mmol) was added all at once. Then a solution of pyridine (2.8 mL, 2.7 g, 35 mmol) in acetonitrile (10 mL) was added dropwise in 5 min at −5 to 0° C. The mixture was stirred 15 minutes at −5 to 0° C., and then methanesulfonyl chloride (1.0 mL, 1.5 mL, 13 mmol) in acetonitrile (5 mL) was added dropwise in 5 min at −5 to 0° C. The reaction mixture was stirred 15 minutes at this temperature, then allowed to warm slowly to room temperature, and stirred 4 h. Water (15 mL) was added dropwise, and the mixture was stirred 15 minutes. Then the mixture was filtered, and the solids were washed with 2:1 acetonitrile-water (3×3 mL), then with acetonitrile (2×3 mL), and dried under nitrogen to afford the title product as a pale yellow powder, 3.83 g (94.0% crude yield), melting at 199-201° C. HPLC of the product using a Zorbax® RX-C8 chromatography column (4.6 mm×25 cm, eluent 25-95% acetonitrile/pH 3 water) showed a major peak corresponding to the title compound and having 97.8% of total chromatogram peak area.

Aufarbeitung

  1. customA slurry formed during the addition
  2. stirringThe mixture was stirred 15 minutes at −5 to 0° C.
  3. stirringThe reaction mixture was stirred 15 minutes at this temperature
  4. temperatureto warm slowly to room temperature
  5. stirringstirred 4 h
  6. stirringthe mixture was stirred 15 minutes
  7. filtrationThen the mixture was filtered
  8. washthe solids were washed with 2:1 acetonitrile-water (3×3 mL)
  9. dry with materialwith acetonitrile (2×3 mL), and dried under nitrogen

Quellen und Nachweise

ORD-Eintrag
ord-884b6b70958e4794af63e8f62f27c44f
Quelldatensatz
uspto-grants-2016_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09445593B1

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion