StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → 2-Hydroxy-3',4'-dihydroxyacetophenone

HRID 909695
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 909695
Cl[CH2:2][C:3]([C:5]1[CH:6]=[C:7]([OH:12])[C:8](=[CH:10][CH:11]=1)[OH:9])=[O:4].O.C([O-])=[O:15].[Na+].Cl>C(O)=O>[OH:15][CH2:2][C:3]([C:5]1[CH:6]=[C:7]([OH:12])[C:8](=[CH:10][CH:11]=1)[OH:9])=[O:4]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 4

HCID 313Hydrochloric AcidHCID 962WaterHCID 668342-Chloro-3',4'-dihydroxyacetophenoneHCID 2723810Sodium Formate

Produkt 1

HCID 221344442-Hydroxy-3',4'-dihydroxyacetophenoneAusbeute 98,9 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 284
Formic Acid
Lösungsmittel

Reaktionsbedingungen

Temperatur
100 °C

Versuchsvorschrift

A 0.1 liter reactor equipped with a reflux condenser and magnetic stirring bar was charged under argon with 5.05 g of 4-chloroacetyl-catechol of a purity of ca. 99%, 50 ml of water, 2.8 g of sodium formate and 1.55 ml (˜1.9 g) of formic acid. The stirred mixture was heated under reflux (˜100° C.) for 22 hours. The solution was cooled to about 25° C. and acidified by addition of 2 g of conc. hydrochloric acid (37%) resulting in a pH of about 0.5. The mixture was extracted with ethyl acetate, once with 100 ml then 3 times with 50 ml each. The organic extracts have been back washed 3 times with 30 ml 10% brine. The combined organic phases were dried with sodium sulfate, filtered and evaporated at reduced pressure at 40° C. This resulted in a light tan solid crystalline product of 4.56 g of 97.4% purity corresponding to a yield of 98.9%.

Aufarbeitung

  1. customA 0.1 liter reactor equipped with a reflux condenser and magnetic stirring bar
  2. temperatureThe stirred mixture was heated
  3. temperatureThe solution was cooled to about 25° C.
  4. customresulting in a pH of about 0.5
  5. extractionThe mixture was extracted with ethyl acetate, once with 100 ml
  6. washThe organic extracts have been back washed 3 times with 30 ml 10% brine
  7. dry with materialThe combined organic phases were dried with sodium sulfate
  8. filtrationfiltered
  9. customevaporated at reduced pressure at 40° C
  10. customThis resulted in a light tan solid crystalline product of 4.56 g of 97.4% purity corresponding to a yield of 98.9%

Quellen und Nachweise

ORD-Eintrag
ord-af641ecfe7dc4cc787411e21b650cdc9
Quelldatensatz
uspto-grants-2011_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08017815B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion