StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Methanol → 4-Methyl-2,3,5,6-tetrafluorobenzyl alcohol

HRID 971184
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 971184
CO.[F:3][C:4]1[C:11]([F:12])=[C:10]([CH2:13]Br)[C:9]([F:15])=[C:8]([F:16])[C:5]=1[CH2:6][OH:7]>[Pd].O>[F:3][C:4]1[C:11]([F:12])=[C:10]([CH3:13])[C:9]([F:15])=[C:8]([F:16])[C:5]=1[CH2:6][OH:7]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 2

HCID 887MethanolHCID 11265752(4-(Bromomethyl)-2,3,5,6-tetrafluorophenyl)methanol

Produkt 1

HCID 27342094-Methyl-2,3,5,6-tetrafluorobenzyl alcoholAusbeute 89,4 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 23938PalladiumKatalysatorHCID 962WaterLösungsmittel

Versuchsvorschrift

The following procedures were carried out in a 1 litre glass autoclave (working volume 350-500 mls) fitted with a dispersion agitator (1000 rpm). H2 gas was fed through a dip-pipe via a Buchi gas controller (Type 6002). The increase/decrease of the temperature is controlled by a Jelabo FP40 external heating/cooling bath. Methanol (362 g, water (6 g, 2,3,5,6-tetrafluoro-4-(bromomethyl)benzyl alcohol (95.1 g 100% wt.), MgO (18.1 g and 5% palladium/carbon catalyst (0.8 g, 100 wt %; Type 58, provided by Johnson Matthey) were charged to the autoclave. The lid was sealed and the autoclave was initially purged with nitrogen to remove residual oxygen (nearly 0), then pressurized to 2.5 bar with hydrogen, and stirred. The pressure was maintained at 2.5 bar by the Buchi controller. The reaction temperature was controlled at 50° C. throughout the reaction by means of the external heating/cooling bath. The reaction was continued until the consumption of hydrogen ceased (typically 60 to 90 minutes). The residual pressure was released and the autoclave purged with nitrogen. The contents of the autoclave were discharged, followed by a small methanol (30 g wash. The spent catalyst and inorganic salts were removed and recovered by filtration. The filter cake was washed with a small amount of methanol (2×30 g. The filtrates and filter-cake washes were combined. On analysis, the reaction had produced 60.4 g of 2,3,5,6-tetrafluoro-4-methylbenzyl alcohol with a yield of 89.4%.

Aufarbeitung

  1. customfitted with a dispersion agitator (1000 rpm)
  2. temperatureThe increase/decrease of the temperature
  3. customis controlled by a Jelabo FP40 external heating/cooling bath
  4. customThe lid was sealed
  5. customthe autoclave was initially purged with nitrogen
  6. customto remove residual oxygen (nearly 0),
  7. temperatureThe pressure was maintained at 2.5 bar by the Buchi controller
  8. customThe reaction temperature was controlled at 50° C. throughout the reaction by means of the external heating/cooling bath
  9. customThe reaction was continued until the consumption of hydrogen
  10. customtypically 60 to 90 minutes
  11. customthe autoclave purged with nitrogen
  12. washwash
  13. customThe spent catalyst and inorganic salts were removed
  14. filtrationrecovered by filtration
  15. washThe filter cake was washed with a small amount of methanol (2×30 g
  16. filtrationThe filtrates and filter-cake washes

Quellen und Nachweise

ORD-Eintrag
ord-fa0ca8c33fcd414dafb1468ac0f1e1d2
Quelldatensatz
uspto-grants-2007_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07312366B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion