HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Bromoacetic Acid

HCID 6227
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
79-08-3
Standard SMILES
O=C(O)CBr
InChIKey
KDPAWGWELVVRCH-UHFFFAOYSA-N
Molecular formula
C2H3BrO2
Average molar mass
138.95 g/mol
Monoisotopic mass
137.93164

Overview

Bromoacetic acid appears as colorless crystals. Melting point 51 °C. Density 1.93 g / cm3. Corrosive to metals and tissue. Poisonous by ingestion. Used to cause drop of citrus fruit in harvesting.

Names & identifiers

Preferred name
Bromoacetic Acid
IUPAC
2-bromoacetic acid
English name
Bromoacetic acid
Molecular formula
C2H3BrO2
Molecular weight
138.95

Names & synonyms

BROMOACETIC ACID2-Bromoacetic acid79-08-3Acetic acid, bromo-Monobromoacetic acidBromoethanoic acidTo NTUBromoacetate ionAcide bromacetique2-Bromoacetyl Group2-bromoethanoic acidMonobromessigsaeure
Show more names
bromoaceticBromoacetic acid in ethyleneglycol, ca. 10% BrCH2CO2H, 35% glycol balance estertontuCH2BrCOOH
Kyselina bromoctovaalpha-Bromoacetic acidBromo-acetic acidalpha-Bromoethanoic acidBromoacetic acid, solidDTXSID7021495Carboxymethyl bromideNSC-141

Database identifiers

CAS
79-08-3
PubChem CID
6227
DTXSID
DTXSID7021495
ChEMBL
CHEMBL60851
UNII
2B3HS32431
EC Number
201-175-8
Nikkaji
J1.492C

Properties

Computed structural properties

XLogP
0.4
Topological polar surface area
37.3 Ų
Hydrogen bond donors
1
Hydrogen bond acceptors
2
Rotatable bonds
1
Heavy atoms
5
Formal charge
0
Complexity
42.9

Experimental & physicochemical properties

Chemical Classes · 2 items

Other Classes -> Organic Acids

Corrosives

DrugsPharmaceuticals -> Listed in ZINC15
LipidsFatty Acyls [FA] -> Fatty Acids and Conjugates [FA01] -> Halogenated fatty acids [FA0109]
SpringerMaterials PropertiesBoiling point
LogP · 2 items

log Kow = 0.41

0.41

DensityDensity: 1.9335 at 50 °C
Color/Form · 2 items

Hexagonal or rhomboidal hygroscopic crystals

Colorless, deliquescent crystals

Solubility · 4 items

In water, 6.36X10+5 mg/L at 25 °C

Miscible with water

Miscible with ethanol, ether; soluble in acetone, benzene; slightly soluble in chloroform

Soluble in methanol

CorrosivityStrong irritant to skin and tissues
Flash Point113 °C (235 °F) - closed cup
Boiling Point · 2 items

208 °C

208 °C @760 [mm Hg]

DecompositionWhen heated to decomposition it emits toxic fumes of /bromide/.

Physicochemical properties

Melting point
46 · 46-49 °C
Boiling point
208 °C · 208 °C(lit.)
Density
1 · 1
vapor pressure
1 mm · 1 mm Hg @ 550C
refractive index
1.4804 · 1.4804 (estimate)
Flash point
110 °C · >110°C
storage temp.
30 °C · Store below +30°C.
solubility
10 %, · chloroform: soluble10%, clear, colorless
pka
2.69 · 2.69(at 25℃)
form
Crystalline Mass or Crystalline Powder, Flakes, Crystals and/or Chunks
color
White to yellow
Water Solubility
miscible
Specific Heat Capacity
0.58 J/ · Cp(gas): 0.58 J/(g·K), at 25℃
Sensitive
Light Sensitive & Hygroscopic
Merck
14 · 14,1400
BRN
506167 · 506167
Henry's Law Constant
1.5 · 1.5×103 mol/(m3Pa) at 25℃, Burkholder et al. (2019)
InChI
1S/C2H3BrO2/c3-1-2(4)5/h1H2,(H,4,5)
InChIKey
KDPAWGWELVVRCH-UHFFFAOYSA-N
SMILES
NC(=O)C=C || OC(=O)CBr
LogP
-2.3 at · -2.3 at 22℃
CAS DataBase Reference
79 · 79-08-3(CAS DataBase Reference)
EWG's Food Scores
1 · 1-2
FDA UNII
2 B3HS32431 · 2B3HS32431
NIST Chemistry Reference
Acetic acid, bromo-(79-08-3)
EPA Substance Registry System
Bromoacetic acid (79-08-3)
UNSPSC Code
12352200 · 12352200
NACRES
22 · NA.22
Symbol(GHS)
5 · GHS05,GHS06,GHS08,GHS09
Signal word
Danger
Hazard statements
300 · H300+H310+H330-H314-H317-H341-H400-H290
Precautionary statements
501 · P501-P273-P272-P260-P270-P262-P202-P234-P201-P271-P264-P280-P284-P390-P391-P308+P313-P361+P364-P303+P361+P353-P333+P313-P301+P330+P331-P301+P310+P330-P304+P340+P310-P305+P351+P338+P310-P403+P233-P406-P405
PPE
3 · Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges
Hazard Codes
T,C,N,Xi,F
Risk Statements
23 · 23/24/25-35-50-40-36/37/38-43-38
Safety Statements
26 · 26-36/37/39-45-61-36-16
RIDADR
1938 · UN 1938 8/PG II/III (BROMOACETIC ACID SOLUTION)
WGK Germany
2 · 2
RTECS
5950000 · AF5950000
F
3 · 3-19-23
Hazard Note
Toxic/Corrosive
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
HS Code
2915900090 · 2915900090
Storage Class
6.1 A · 6.1A - Combustible acute toxic Cat. 1 and 2very toxic hazardous materials
Hazard Classifications
2 OralAcute · Acute Tox. 2 OralAcute Tox. 3 DermalAcute Tox. 3 InhalationAquatic Acute 1Eye Dam. 1Skin Corr. 1ASkin Sens. 1
Hazardous Substances Data
79 · 79-08-3(Hazardous Substances Data)
REACH Registrations
Active
Limited Quantities
1 Kg · 1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H301: Toxic if swallowed [Danger Acute toxicity, oral]

P260, P261, P262, P264, P270, P271, P272, P273, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P333+P317, P361+P364, P362+P364, P363, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Danger

H301 (99.3%): Toxic if swallowed [Danger Acute toxicity, oral]

P260, P261, P262, P264, P270, P271, P272, P273, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P333+P317, P361+P364, P362+P364, P363, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 4 items

Chemical: Acetic acid, bromo-

REACH registered substance: Bromoacetic acid (EC: 201-175-8)

Bromoacetic acid: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT Label · 2 items

Corrosive

Corrosive

Fire Hazards · 4 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

· Combustible material: may burn but does not ignite readily.

· Combustible material: may burn but does not ignite readily.

Health Hazards · 4 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Causes somnolence, rigidity, and respiratory depression in oral lethal-dose studies of rats; [RTECS] Corrosive; [Merck Index] Causes irritation and burns to skin and mucous membranes; [HSDB] Causes burns; May cause skin sensitization; Toxic by ingestion, inhalation, and skin absorption; [ECHA REACH Registrations] Causes burns and lachrymation; Inhalation may cause corrosive injuries to upper respiratory tract; May cause respiratory sensitization; Toxic by inhalation; Highly toxic by ingestion and skin absorption; Targets the kidney and liver; [Sigma-Aldrich MSDS] See Chloroacetic acid.

DOT ID and Guide · 2 items

1938 156

3425 156

Reactive Group · 2 items

Acids, Carboxylic

Acids, Carboxylic

Special Reports · 1 item

DHHS/NTP; Report on Carcinogens Monograph on Haloacetic Acids Found as Water Disinfection By-Products. 200 pp (March 2018). ---- This RoC monograph on HAAs Found as Water Disinfection By-Products evaluates the available, relevant scientific information and assesses its quality, for each individual HAA or for potential evaluation of the HAAs as a chemical class or subclass, applies the RoC listing criteria to the scientific information, and recommends an RoC listing status (see Figure 1). The monograph also contains draft profiles containing the NTP's preliminary listing recommendation, a summary of the scientific evidence considered key to reaching that recommendation, and data on properties, use, production, exposure, and Federal regulations and guidelines to reduce exposure to haloacetic acids in the public water supply and from other potential exposures.[Available from, as of November 30, 2018: http://ntp-server.niehs.nih.gov/]

Reactivity Profile · 2 items

Carboxylic acids, such as BROMOACETIC ACID, donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.

Carboxylic acids, such as BROMOACETIC ACID, donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.

DOT Emergency Guidelines · 5 items

/GUIDE 156 SUBSTANCES - TOXIC and/or CORROSIVE (Combustible/Water-Sensitive)/ Fire or Explosion: Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. /Bromoacetic acid; Bromoacetic acid, solution; Bromoacetic acid, solid/

/GUIDE 156 SUBSTANCES - TOXIC and/or CORROSIVE (Combustible/Water-Sensitive)/ Health: TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. /Bromoacetic acid; Bromoacetic acid, solution; Bromoacetic acid, solid/

/GUIDE 156 SUBSTANCES - TOXIC and/or CORROSIVE (Combustible/Water-Sensitive)/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. Keep unauthorized personnel away. Stay upwind, uphill and/or upstream. Ventilate enclosed areas. /Bromoacetic acid; Bromoacetic acid, solution; Bromoacetic acid, solid/

/GUIDE 156 SUBSTANCES - TOXIC and/or CORROSIVE (Combustible/Water-Sensitive)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. /Bromoacetic acid; Bromoacetic acid, solution; Bromoacetic acid, solid/

For more DOT Emergency Guidelines (Complete) data for Bromoacetic acid (8 total), please visit the HSDB record page.

DOT Hazard Classification · 6 items

Bromoacetic acid, solid

UN3425

Class 8 Corrosive material (49 eCFR § 173.136)

PG II: the degree of danger presented by the material is medium

Bromoacetic acid solution

UN1938

Air and Water Reactions · 2 items

Deliquescent [Hawley]. Water soluble.

Water soluble.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Accidental Release Measures · 4 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 4 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

General First Aid:

General First Aid:

Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

· Wear positive pressure self-contained breathing apparatus (SCBA).

Fire Fighting Procedures · 4 items

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.

If material on fire or involved in fire: Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, dry chemical or carbon dioxide. /Bromoacetic acid, solid/

If material on fire or involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.). Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. /Bromoacetic acid, solution or bromoacetic acid/

Storage ConditionsKeep container tightly closed in a dry and well-ventilated place. Hygroscopic. Air sensitive. Light sensitive. Handle and store under inert gas.
Cleanup Methods · 4 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

Environmental considerations: Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ /Bromoacetic acid, solid; Bromoacetic acid, solution or bromoacetic acid/

Environmental considerations: Water spill: Use natural barriers or oil spill control booms to limit spill travel. Use natural deep water pockets, excavated lagoons, or sand bag barriers to trap material at bottom. Remove trapped material with suction hoses. /Bromoacetic acid, solid; Bromoacetic acid, solution or bromoacetic acid/

Environmental considerations: Air spill: Apply water spray or mist to knock down vapors. /Bromoacetic acid, solid; Bromoacetic acid, solution or bromoacetic acid/

Nonfire Spill Response · 2 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Disposal Methods · 2 items

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging: Dispose of as unused product.

Preventive Measures · 5 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Further processing of solid materials may result in the formation of combustible dusts. The potential for combustible dust formation should be taken into consideration before additional processing occurs. Provide appropriate exhaust ventilation at places where dust is formed.

Appropriate engineering controls: Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.

Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

For more Preventive Measures (Complete) data for Bromoacetic acid (9 total), please visit the HSDB record page.

Isolation and Evacuation · 4 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Immediate precautionary measure

Immediate precautionary measure

Protective Action Criteria (PAC) · 3 items

0.15 [mg/m3]

1.7 [mg/m3]

9.9 [mg/m3]

Toxicology

Treatment · 1 item

EYES: irrigate opened eyes for several minutes under running water. INGESTION: do not induce vomiting. Rinse mouth with water (never give anything by mouth to an unconscious person). Seek immediate medical advice. SKIN: should be treated immediately by rinsing the affected parts in cold running water for at least 15 minutes, followed by thorough washing with soap and water. If necessary, the person should shower and change contaminated clothing and shoes, and then must seek medical attention. INHALATION: supply fresh air. If required provide artificial respiration.

Health Effects · 1 item

Bromoacetic acid is a strong lachrymator. Animal studies have also indicated that bromoacetic acid is a teratogen (a developmental toxin) leading to soft tissue malformations in fetuses at doses of 100 mg/kg/day. Bromoacetic acid is also a mutagen and a cytotoxic agent.

Ecotoxicity Values · 5 items

EC50; Species: Scenedesmus subspicatus (Green algae) log growth phase; Conditions: freshwater, static, 24 °C, pH 8.0-9.3; Concentration: 340 ug/L for 48 hr; Effect: decreased population biomass /formulated product/

EC50; Species: Scenedesmus subspicatus (Green algae) log growth phase; Conditions: freshwater, static, 24 °C, pH 8.0-9.3; Concentration: 200 ug/L for 72 hr; Effect: decreased population biomass /formulated product/

EC50; Species: Scenedesmus subspicatus (Green algae) log growth phase; Conditions: freshwater, static, 24 °C, pH 8.0-9.3; Concentration: 220 ug/L for 96 hr; Effect: decreased population biomass /formulated product/

EC50; Species: Scenedesmus subspicatus (Green algae) log growth phase; Conditions: freshwater, static, 24 °C, pH 8.0-9.3; Concentration: 2300 ug/L for 48 hr; Effect: decreased population, general population changes /formulated product/

For more Ecotoxicity Values (Complete) data for Bromoacetic acid (7 total), please visit the HSDB record page.

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2.4(SRC), determined from a log Kow of 0.41(2) and a regression-derived equation(3), indicates that bromoacetic acid is expected to have very high mobility in soil(SRC). The pKa of bromoacetic acid is 2.89(4), indicating that this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5). Volatilization from moist soil is not expected because the compound exists as an anion and anions do not volatilize. Bromoacetic acid is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.119 mm Hg at 25 °C(6). Using the OECD Closed Bottle Test and unacclimated activated sludge, bromoacetic acid was not biodegraded(7). However, bromoacetic acid, present at 2 mg/L, reached 82% of its theoretical BOD using a preacclimatized inoculum derived from a Zahn-Wellens test and the OECD Closed Bottle Test(7), suggesting that biodegradation is not an important environmental fate process in soil unless under specific conditions(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2.4(SRC), determined from a log Kow of 0.41(2) and a regression-derived equation(3), indicates that bromoacetic acid is not expected to adsorb to suspended solids and sediment(SRC). A pKa of 2.89(4) indicates bromoacetic acid will exist almost entirely in the anion form at pH values of 5 to 9 and, therefore, volatilization from water surfaces is not expected to be an important fate process(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Bromoacetic acid exposed to moisture is readily hydrolyzed to glycolic acid(6). Using the OECD Closed Bottle Test and unacclimated activated sludge, bromoacetic acid was not biodegraded(7). However, bromoacetic acid, present at 2 mg/L, reached 82% of its theoretical BOD using a preacclimatized inoculum derived from a Zahn-Wellens test and the OECD Closed Bottle Test(7), suggesting that biodegradation is not an important environmental fate process in water unless under specific conditions(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bromoacetic acid, which has a vapor pressure of 0.119 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase bromoacetic acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 days(SRC), calculated from its rate constant of 7.2X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Bromoacetic acid does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).

Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesOral (L626) ; inhalation (L626) ; dermal (L626)
Toxicity Summary · 2 items

IDENTIFICATION AND USE: Bromoacetic acid is a solid. It is used in organic synthesis, abscission of citrus fruit in harvesting. HUMAN STUDIES: All monohaloacetic acids were genotoxic in primary human lymphocytes. Bromoacetic acid exposure of human cells in vitro altered transcript profiles of genes involved in DNA repair, especially the repair of double strand DNA breaks, and in cell cycle regulation. ANIMAL STUDIES: It exhibited high acute oral toxicity in rodents and rabbits, and high acute dermal toxicity in rats. Eye damage occurred when sodium bromoacetate was given intravenously to rabbits. Single exposures to the acid or its sodium salt induced nervous system toxicity in dogs treated orally or by injection. Damage to the liver, heart, kidney, lung and skeletal muscle was found in pigs which died following repeated oral doses of the acid and movement disorders occurred in those that survived. Repeated oral administration of bromoacetic acid to pregnant rats caused fetal malformations and decreased fetal growth at maternally toxic doses. Limited oral studies in pigs did not reveal any convincing effect of the acid on fertility, but sterility has been reported in rats treated by repeated subcutaneous injection. DNA damage was induced in mouse cells treated with bromoacetic acid. ECOTOXICITY STUDIES: Bromoacetic acid is formed when effluent containing chlorine residuals react with humics in natural waters containing bromide. Bromoacetic acid additions caused an alteration of phytoplankton community structure with implications for higher trophic levels.

Organobromide compounds, especially alkylbromides are strong alkylating agents. Consequently they can randomly modify the surfaces of proteins and lipids, leading to the disruption of enzyme, transporter or membrane functions. One of the most probable protein targets is the TRPA1 ion channel that is expressed in sensory nerves (trigeminal nerve) of the eyes, nose, mouth and lungs. Alkylation of DNA by organobromides may also lead to mutations.

Ecotoxicity Excerpts · 2 items

/AQUATIC SPECIES/ Using seawater for toilet flushing may introduce high levels of bromide and iodide into a city's sewage treatment works, and result in the formation of brominated and iodinated disinfection byproducts (DBPs) during chlorination to disinfect sewage effluents. In a previous study, the authors' group has detected the presence of many brominated DBPs and identified five new aromatic brominated DBPs in chlorinated saline sewage effluents. The presence of brominated DBPs in chlorinated saline effluents may pose adverse implications for marine ecology. In this study, besides the detection and identification of another seven new aromatic halogenated DBPs in a chlorinated saline sewage effluent, their developmental toxicity was evaluated using the marine polychaete Platynereis dumerilii. For comparison, the developmental toxicity of some commonly known halogenated DBPs was also examined. The rank order of the developmental toxicity of 20 halogenated DBPs was 2,5-dibromohydroquinone > 2,6-diiodo-4-nitrophenol >/= 2,4,6-triiodophenol > 4-bromo-2-chlorophenol >/= 4-bromophenol > 2,4-dibromophenol >/= 2,6-dibromo-4-nitrophenol > 2-bromo-4-chlorophenol > 2,6-dichloro-4-nitrophenol > 2,4-dichlorophenol > 2,4,6-tribromophenol > 3,5-dibromo-4-hydroxybenzaldehyde > bromoform >/= 2,4,6-trichlorophenol > 2,6-dibromophenol > 2,6-dichlorophenol > iodoacetic acid >/= tribromoacetic acid > bromoacetic acid > chloroacetic acid. On the basis of developmental toxicity data, a quantitative structure-activity relationship (QSAR) was established. The QSAR involved two physical-chemical property descriptors (log P and pKa) and two electronic descriptors (the lowest unoccupied molecular orbital energy and the highest occupied molecular orbital energy) to indicate the transport, biouptake, and biointeraction of these DBPs. It can well predict the developmental toxicity of most of the DBPs tested.

/AQUATIC SPECIES/ Bromoacetic acid is formed when effluent containing chlorine residuals react with humics in natural waters containing bromide. The objective of this research was to quantify the effects of bromoacetic acid on estuarine phytoplankton as a proxy for ecosystem productivity. Bioassays were used to measure the EC50 for growth in cultured species and natural marine communities. Growth inhibition was estimated by changes in chlorophyll a concentrations measured by fluorometry and HPLC. The EC50s for cultured Thalassiosira pseudonana were 194 mg/L, 240 mg/L for Dunaliella tertiolecta and 209 mg/L for Rhodomonas salina. Natural phytoplankton communities were more sensitive to contamination with an EC50 of 80 mg/L. Discriminant analysis suggested that bromoacetic acid additions cause an alteration of phytoplankton community structure with implications for higher trophic levels. A two-fold EC50 decrease in mixed natural phytoplankton populations affirms the importance of field confirmation for establishing water quality criteria.

Signs and Symptoms · 1 item

Contact can lead to severe skin and eye burns, it can also irritate the nose throat and lungs if inhaled. Inhalation may result in spasm, inflammation and edema of the larynx and bronchi, chemical pneumonitis, and pulmonary edema. Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.

Ongoing Test Status · 2 items

The following link will take the user to the National Toxicology Program (NTP) Test Status of Agents Search page, which tabulates the results and current status of tests such as "Short-Term Toxicity Studies", "Long-term Carcinogenicity Studies", "Developmental Studies", "Genetic Toxicology Studies", etc., performed with this chemical. Testing status for bromoacetic acid is available.[Available from, as of February 1, 2019: https://ntpsearch.niehs.nih.gov/?e=True&ContentType=Testing+Status]

EPA has released the Interactive Chemical Safety for Sustainability (iCSS) Dashboard. The iCSS Dashboard provides an interactive tool to explore rapid, automated (or in vitro high-throughput) chemical screening data generated by the Toxicity Forecaster (ToxCast) project and the federal Toxicity Testing in the 21st century (Tox21) collaboration. /The title compound was tested by ToxCast and/or Tox21 assays/[USEPA; ICSS Dashboard Application; Available from, as of February 4, 2019: http://actor.epa.gov/dashboard/]

Effluent ConcentrationsBromoacetic acid was detected in the Tres Rios Wetlands, which receive tertiary-treated sewage effluent from the 91st Ave Wastewater Treatment Plant southwest of Phoenix, AZ, at concentrations of not detected to 12.0 ug/L(1).
Soil Adsorption/Mobility · 1 item

The Koc of bromoacetic acid is estimated as 2.4(SRC), using a log Kow of 0.41(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that bromoacetic acid is expected to have very high mobility in soil. The pKa of bromoacetic acid is 2.89(4), indicating that this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).

Regulatory information

Federal Drinking Water Standards · 1 item

The maximum contaminant level for haloacetic acids (five) (HAA5) is 0.060 mg/L. /Haloacetic acids (five) (HAA5) mean the sum of the concentrations in milligrams per liter of the haloacetic acid compounds (monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid, and dibromoacetic acid), rounded to two significant figures after addition./

Safety data

F
3-19-23
PPE
Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges
wgk
2
tsca
TSCA listed
rtecs
AF5950000
ridadr
UN 3425 8/PG II (BROMOACETIC ACID, SOLID)
hs_code
2915900090
risk_code
23/24/25-35-50-40-36/37/38-43-38
Signal word
Danger
Symbol(GHS)
GHS05,GHS06,GHS08,GHS09
hazard_code
T,C,N,Xi,F
hazard_note
Toxic/Corrosive
safety_code
26-36/37/39-45-61-36-16
hazard_class
8
Storage Class
6.1A - Combustible acute toxic Cat. 1 and 2very toxic hazardous materials
packing_group
II
Hazard statements
H300+H310+H330-H314-H317-H341-H400-H290
Limited Quantities
1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Acute Tox. 2 OralAcute Tox. 3 DermalAcute Tox. 3 InhalationAquatic Acute 1Eye Dam. 1Skin Corr. 1ASkin Sens. 1
Precautionary statements
P501-P273-P272-P260-P270-P262-P202-P234-P201-P271-P264-P280-P284-P390-P391-P308+P313-P361+P364-P303+P361+P353-P333+P313-P301+P330+P331-P301+P310+P330-P304+P340+P310-P305+P351+P338+P310-P403+P233-P406-P405
Hazardous Substances Data
79-08-3(Hazardous Substances Data)

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 1 item

... The metabolism of bromoacetaldehyde and bromoacetic acid has been investigated; N-acetyl-S-(carboxymethyl)cysteine had been shown to be a common urinary metabolite. An oxidative metabolic pathway is proposed for 2-bromoethanol, via bromoacetaldehyde and bromoacetic acid, to N-acetyl-S-(carboxymethyl)cysteine.

Uses & manufacturing

Uses · 6 items

Used to induce fruit for citrus fruit harvesting; [CAMEO] Used in organic syntheses; [HSDB] Used to make fine chemicals and as a biocide (cleaning products, disinfectants, and pest control products); [ECHA REACH Registrations]

Using Disinfectants or Biocides [Category: Clean]

For bromoacetic acid (USEPA/OPP Pesticide Code: 008702) there are 0 labels match. /SRP: Not registered for current use in the USA, but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./

Organic synthesis, abscission of citrus fruit in harvesting.

Esters of bromoacetic acid are the reagents of choice in the Reformatsky reaction, which is used to prepare beta-hydroxy acids or alpha,beta-unsaturated acids.

... Used in many chemical processes as starting materials or as reaction intermediates.

U.S. ProductionProduction volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#7317]
Methods of Manufacturing · 3 items

Bromoacetic acid can be prepared by the bromination of acetic acid in the presence of acetic anhydride and a trace of pyridine, by the Hell-Volhard-Zelinsky bromination catalyzed by phosphorus, and by direct bromination of acetic acid at high temperatures or with hydrogen chloride as catalyst. Other methods of preparation include treatment of chloroacetic acid with hydrobromic acid at elevated temperatures, oxidation of ethylene bromide with fuming nitric acid, hydrolysis of dibromovinyl ether, and air oxidation of bromoacetylene in ethanol.

By heating acetic acid and bromine.

Bromoacetic acid /is/ ... usually prepared by the well-known Hell-Volhard-Zelinski reaction in which the alpha-hydrogens of the carboxylic acid are replaced by bromine. A catalyst, such as a phosphorus trihalide, is necessary to convert the acid to the acid halide, the actual reaction intermediate. If the acid chloride or bromide is available as a starting material, no catalyst is needed and only one equivalent of bromine is required versus the two equivalents necessary when the carboxylic acid is the starting material. The resulting bromoacetyl halide can either be hydrolyzed or esterified to produce bromoacetic acid or its esters.

General Manufacturing Information · 3 items

Acetic acid, 2-bromo-: ACTIVE

Haloacetic acids (five) (HAA5) mean the sum of the concentrations in milligrams per liter of the haloacetic acid compounds (monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid, and dibromoacetic acid), rounded to two significant figures after addition. /Haloacetic Acids (five) (HAA5)/

Haloacetic acids ... are chemical byproducts of chlorination and chloramination of drinking water. /Haloacetates/

Applications · 3 items

UsesBromoacetic acid is used in organic synthesis and as an alkylating agent. It is also used as a biochemical for proteomics research. It is an important raw material and intermediate used in organic synthesis, pharmaceuticals, dyes and agrochemicals.

UsesBromoacetic acid is mainly used for the N-terminal bromoacylation of resin bound peptides.It can also be used:To synthesize (Z)-2-(cyclooct-4-en-1-yloxy)acetic acid. To synthesize α-bromo-phenylacetamide.To convert aromatic thiosemicarbazones to thiazolylhydrazones.

General DescriptionAqueous solution.

Preparation methods · 1 item

PreparationBromoacetic acid is commonly prepared via α-bromination of acetic acid with bromine under dehydrating conditions provided by acetic anhydride. Pyridine may be employed as a solvent and acid scavenger. The overall stoichiometric equation is: CH₃COOH + Br₂ → BrCH₂COOH + HBr

Upstream & downstream products

Upstream raw materials

Acetic anhydrideBromine

Downstream products

2-Methoxy-pyrimidine-5-carbaldehydeThianaphthene7-Hydroxy-4-methyl-3-coumarinylacetic acidSevofluraneTri-tert-butyl 1 4 7 10-tetraazacyclododBromoacetyl chloride2-Ethylpyrimidine-5-carbaldehydeRhodanine-3-acetic acid2-Methylsulfanyl-pyrimidine-5-carbaldehyde2-Amino-5-pyrimidinecarboxyaldehydeZiprasidoneEthyl bromoacetateMethyl bromoacetatePyrrolidin-1-yl-acetic acidBromoformBoc-NH-PEG2-CH2COOHAcetic acid, 2-(phenylseleno)-2-(cyclopropylmethoxy)acetic acidmPEG6-CH2COOH

Related reactions

426 records
New reaction record
HRID 4163 reaction equation
HRID 4163As reactant
HRID 5560 reaction equation
HRID 5560As reactant
HRID 10157 reaction equation
HRID 10157As reactant
HRID 11441 reaction equation
HRID 11441As reactant
HRID 11479 reaction equation
HRID 11479As reactant
HRID 18384 reaction equation
HRID 18384As reactant
HRID 18409 reaction equation
HRID 18409As reactant
HRID 20552 reaction equation
HRID 20552As reactant
PreviousPage 1 of 54

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes