HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

2-Pentanone

HCID 7895
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
107-87-9
Standard SMILES
CCCC(C)=O
InChIKey
XNLICIUVMPYHGG-UHFFFAOYSA-N
Molecular formula
C5H10O
Average molar mass
86.13 g/mol
Monoisotopic mass
86.07316494

Overview

Methyl propyl ketone appears as a clear colorless liquid with the odor of fingernail polish. Flash point 45 °F. Less dense than water and soluble in water. Hence floats on water. Density 0.809 g / cm3. Vapors heavier than air.

Names & identifiers

Preferred name
2-Pentanone
IUPAC
pentan-2-one
English name
2-Pentanone
Molecular formula
C5H10O
Molecular weight
86.13

Names & synonyms

2-Pentanone107-87-9PENTAN-2-ONEMETHYL PROPYL KETONEEthyl acetoneMethyl n-propyl ketoneEthylacetoneMetylopropyloketonPropyl methyl ketoneMethylpropyl ketoneMethyl-propyl-cetoneFEMA Number 2842
Show more names
MPK2-PentanonPENTANONE-2FEMA 28422-Pentanone, 99%, pure2-PENTANONE, REAGENTPLUS, >=99%, PURIFIED BY REDISTILLATION2-WT
FEMA No. 28424-methyl-2-butanoneMethyl-n-propyl ketoneDTXSID0021888AI3-32118NSC-5350I97392I10VDTXCID301888

Database identifiers

CAS
107-87-9
PubChem CID
7895
DTXSID
DTXSID0021888
ChEMBL
CHEMBL45345
ChEBI
CHEBI:16472
UNII
I97392I10V
EC Number
203-528-1
Nikkaji
J5.065B

Properties

Computed structural properties

XLogP
0.9
Topological polar surface area
17.1 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
1
Rotatable bonds
2
Heavy atoms
6
Formal charge
0
Complexity
47.9

Experimental & physicochemical properties

Chemical ClassesFlammable agents - 3rd degree
LipidsFatty Acyls [FA] -> Oxygenated hydrocarbons [FA12]
SolventsSolvents -> Ketones (<C12)
SpringerMaterials PropertiesBoiling point
FragrancesFragrance Ingredient (2-Pentanone) -> IFRA transparency List
LogP · 4 items

log Kow = 0.91

0.91

0.91

0.95

OdorCharacteristic acetone-like odor
Food AdditivesANTIOXIDANT, FLAVORING AGENT OR ADJUVANT -> FDA Substance added to food
Density · 6 items

0.809 at 68 °F (USCG, 1999) - Less dense than water; will float

0.809 at 20 °C/4 °C

Relative density (water = 1): 0.8

0.801-0.806

0.81

0.801-0.806 @25 °C

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 0.3% (6 of 1881) of reports.

Danger

H225 (31.3%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P270, P271, P280, P301+P317, P303+P361+P353, P304+P340, P305+P351+P338, P319, P330, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 1881 reports by companies from 24 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Regulatory Information · 6 items

Chemical: 2-Pentanone

Regulation (EC) No 1831/2003 (amended)

2-Pentanone is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Pentanone are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Pentan-2-one (EC: 203-528-1)

2-Pentanone: HSNO Approval: HSR001046 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Liquid
Fire Hazards · 3 items

Special Hazards of Combustion Products: Irritating vapors and toxic gases, such as carbon dioxide and carbon monoxide, may be formed when involved in fire.

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Highly flammable. Vapour/air mixtures are explosive.

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 2 items

... Male mice of ICR strain were exposed to about 5% n-pentane for one hour while the oxygen in the environmental air was maintained at about 20%. Then their blood and liver tissue were collected and analyzed by means of GC and GC-MS. The metabolites thus obtained were 2-pentanol, 3-pentanol and 2-pentanone. ... In the presence of the NADPH-generating system liver microsomes were made to react to the substrate of saturated n-pentane or isopentane aqueous solution at 37 degrees C for one hour. As a result, the same metabolites were produced as obtained in the exposure experiment. It was therefore suggested that n-pentane ... /was/ metabolized chiefly by liver microsomes. Male mice of ICR strain were fed with 80 mg/kg b.w. of phenobarbital for consecutive four days and exposed to n-pentane ... for one hour. This resulted in an increase in the amount of 2-pentanol and 2-pentanone in the n-pentane inhalation .... inhalation experiment. ...

METHYL-N-PROPYL KETONE CAN BE ABSORBED ... THROUGH SKIN ... ELIMINATION TAKES PLACE MAINLY UNCHANGED IN EXPIRED AIR, TO EXTENT OF 38-54% IN ABOUT 25-35 HR ... RATE OF ELIMINATION FROM BLOOD STREAM IS ONLY HALF AS FAST AS ... CORRESPONDING ALCOHOL, BUT IT IS EXCRETED TO SOME EXTENT IN COMBINATION WITH GLUCURONIC ACID.

Absorption, Distribution and Excretion · 1 item

METHYL-N-PROPYL KETONE CAN BE ABSORBED ... THROUGH SKIN ... ELIMINATION TAKES PLACE MAINLY UNCHANGED IN EXPIRED AIR, TO EXTENT OF 38-54% IN ABOUT 25-35 HR ... RATE OF ELIMINATION FROM BLOOD STREAM IS ONLY HALF AS FAST AS ... CORRESPONDING ALCOHOL, BUT IT IS EXCRETED TO SOME EXTENT IN COMBINATION WITH GLUCURONIC ACID.

Cellular LocationsCytoplasm

Uses & manufacturing

Uses · 6 items

Used as a solvent, a flavoring agent, and in organic synthesis; [ACGIH] Used as a solvent for lacquers and surface coatings; [HSDB]

Painting (Solvents) [Category: Paint]

SYNTHETIC FLAVOR INGREDIENT

Solvent, substitute for diethyl ketone, flavoring.

Related reactions

94 records
New reaction record
HRID 28054 reaction equation
HRID 28054As reactant
HRID 45936 reaction equation
HRID 45936As reactant
HRID 61333 reaction equation
HRID 61333As reactant
HRID 66999 reaction equation
HRID 66999As reactant
HRID 74136 reaction equation
HRID 74136As reactant
HRID 148659 reaction equation
HRID 148659As reactant
HRID 184336 reaction equation
HRID 184336As reactant
HRID 188109 reaction equation
HRID 188109As reactant
PreviousPage 1 of 12

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Flavoring AgentsEU Flavoring substances
Viscosity0.473 cp at 25 °C
Color/Form · 2 items

Colorless liquid

Colorless to water-white liquid

Physicochemical properties

Melting point
78 °C · −78 °C (−108 °F; 195 K)
Boiling point
102 °C · 102 °C (216 °F; 375 K)
Density
0.8062 g/ml · 0.8062 g/ml (20 °C)
vapor pressure
27 mm · 27 mm Hg ( 20 °C)
FEMA
2842 · 2842 | 2-PENTANONE
refractive index
1.3903 · 1.3903 (20 °C)
FLAVIS Number
7.054 · 07.054 | Pentan-2-one
Flash point
10 °C · 10 °C (50 °F; 283 K)
storage temp.
30 °C · Store below +30°C.
solubility
72.6 g/L · water: soluble72.6g/L at 20°C (OECD Test Guideline 105)
form
liquid
color
Colorless
Odor
1 % · at 1.00 % in dipropylene glycol. sweet fruity ethereal wine banana woody
Relative polarity
0.321 · 0.321
explosive limit
1.56 · 1.56-8.70%(V)
Odor Type
fruity
Odor Threshold
0.028 ppm · 0.028ppm
biological source
synthetic
Water Solubility
43 g/L · 43 g/L (20 ºC)
Thermal Conductivity
0.142 W/ · 0.142 W/(m·K) at 25 ℃
Specific Heat Capacity
2.14 J/ · Cp(liquid): 2.14 J/(g·K), at 25℃
λmax
330 nm · λ: 330 nm Amax: 1.00λ: 340 nm Amax: 0.10λ: 350 nm Amax: 0.01λ: 370-400 nm Amax: 0.005
JECFA Number
279 · 279
Merck
14 · 14,6114
BRN
506058 · 506058
Henry's Law Constant
12.3 at · 12.30 at 25.00 °C (headspace-GC, Straver and de Loos, 2005)
Exposure limits
150 ppm · ACGIH:TLV-STEL 150 ppm (529 mg/m3)OSHA:PEL-TWA 200 ppm (700 mg/m3)NIOSH:REL-TWA 150 ppm
Dielectric constant
16.8 · 16.8(14℃)
Stability
Stable. Highly flammable - note low flashpoint. Incompatible with strong bases, oxidizing agents, reducing agents.
Cosmetics Ingredients Functions
SOLVENT
InChI
1S/C5H10O/c1-3-4-5(2)6/h3-4H2,1-2H3
InChIKey
XNLICIUVMPYHGG-UHFFFAOYSA-N
SMILES
CCCC(C)=O
LogP
0.857 at · 0.857 at 20℃
CAS DataBase Reference
107 · 107-87-9(CAS DataBase Reference)
Substances Added to Food (formerly EAFUS)
2 · 2-PENTANONE
FDA 21 CFR
172.515 · 172.515
EWG's Food Scores
1 · 1
FDA UNII
97392 I10V · I97392I10V
NIST Chemistry Reference
2 · 2-Pentanone(107-87-9)
EPA Substance Registry System
2 · 2-Pentanone (107-87-9)
UNSPSC Code
41116107 · 41116107
NACRES
24 · NA.24
Symbol(GHS)
2 · GHS02,GHS06,GHS08
Signal word
Danger
Hazard statements
331 · H331-H302-H316-H319-H335-H336-H305-H225
Precautionary statements
501 · P501-P261-P270-P240-P210-P233-P243-P241-P242-P271-P264-P280-P370+P378-P331-P337+P313-P305+P351+P338-P303+P361+P353-P332+P313-P301+P310-P304+P340+P311-P403+P233-P403+P235-P405
Hazard Codes
F,Xn
Risk Statements
11 · 11-22-36/37/38
Safety Statements
9 · 9-16-29-33-37/39-26
OEB
A
OEL
150 ppm · TWA: 150 ppm (530 mg/m3)
RIDADR
1249 · UN 1249
WGK Germany
1 · 1
RTECS
7875000 · SA7875000
Autoignition Temperature
941 °F · 941 °F
TSCA
TSCA listed
HS Code
2914 · 2914 19 90
HazardClass
3 · 3
PackingGroup
II
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
4 OralEye · Acute Tox. 4 OralEye Irrit. 2Flam. Liq. 2
Hazardous Substances Data
107 · 107-87-9(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in rats: 3.73 g/kg (Smyth)
IDLA
1 · 1,500 ppm
REACH Registrations
Active
Fire Potential
A highly flammable liquid. A very dangerous fire hazard when exposed to heat or flame ...
Health Hazards · 2 items

Exposure can cause irritation of eyes, nose and throat. (USCG, 1999)

· Inhalation or contact with material may irritate or burn skin and eyes.

Hazards SummaryCauses CNS depression and fatty degeneration of the liver after inhalation of high doses by experimental animals; A respiratory tract irritant; [ACGIH]
DOT ID and Guide · 2 items

1249 127

1249 127

FDA Requirements · 1 item

Methyl propyl ketone is a food additive permitted for direct addition to food for human consumption as a synthetic flavoring substance and adjuvant in accordance with the following conditions: a) they are used in the minimum quantity required to produce their intended effect, and otherwise in accordance with all the principles of good manufacturing practice, and 2) they consist of one or more of the following, used alone or in combination with flavoring substances and adjuvants generally recognized as safe in food, prior-sanctioned for such use, or regulated by an appropriate section in this part.

Reactive GroupKetones
UN ClassificationUN Hazard Class: 3; UN Pack Group: II
Reactivity AlertsHighly Flammable
OSHA Standards · 2 items

Permissible Exposure Limit: Table Z-1 8-hr Time Weighted Avg: 200 ppm (700 mg/cu m).

Vacated 1989 OSHA PEL TWA 200 ppm (700 mg/cu m); STEL 250 ppm (875 mg/cu m) is still enforced in some states.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:

Use alcohol-resistant foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 items

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 3 items

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

General First Aid:

(General first aid procedures)

Safe StorageFireproof.
Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

12832.0 [ppm]

Fire Fighting Procedures · 2 items

In case of fire: keep drums, etc., cool by spraying with water. AFFF, alcohol-resistant foam, powder, carbon dioxide.

If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, carbon dioxide, or dry chemical.

Storage Conditions · 1 item

Store in tightly closed containers in a cool, well ventilated area away from oxidizers. Where possible, automatically pump liquid from drums or other storage containers to process containers. Sources of ignition such as smoking and open flames are prohibited where this chemical is handled, used or stored. Metal containers involving the transfer of 5 gallons or more of this chemical should be grounded and bonded. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only non-sparking tools and equipment, especially when opening and closing containers of this chemical. Wherever this chemical is used, handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

Cleanup Methods · 1 item

Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Establish forced ventilation to keep levels below explosive limit. Absorb liquids in vermiculite, dry sand, earth, peat, carbon, or similar material and deposit in sealed containers. Keep this chemical out of a confined space ... because of the possibility of an explosion ... It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Contact your Department of Environmental Protection or your regional office of the federal EPA for specific recommendations. If employees are required to clean up spills, they must be properly trained and equipped. OSHA 1910.120(q) may be applicable.

Nonfire Spill ResponseExcerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:
Disposal Methods · 4 items

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Incineration /SRP: with effective emission controls./

... In this study, a strain of the dimorphic black yeast Exophiala lecanii-corni, which has been shown to degrade high concentrations of toluene in a bioreactor, was evaluated for its ability to degrade a variety of VOCs, both individually and in mixtures. The fungus was found to be able to use toluene, ethyl benzene, methyl propyl ketone, n-butyl acetate, and ethyl ethoxypropionate as sole sources of carbon and energy; however, E. lecanii-corni was unable to degrade either xylene or benzene. When mixtures of chemicals were added to cultures of E. lecanii-corni, the fungus again degraded all of the chemicals except xylene and benzene. ... . These preliminary studies indicate that E. Lecanii-corni would be a feasible organism to use in biofiltration due to its ability to degrade a wide range of VOCs, even under harsh environmental conditions.

... The biofilter, packed with cubed polyurethane foam media and operated with an empty bed residence time of 15s, was supplied with a four-component mixture of n-butyl acetate, methyl ethyl ketone, methyl propyl ketone, and toluene at target influent concentrations of 124, 50.5, 174, and 44.6 mg/cu m, respectively. This corresponds to a total VOC loading rate of 94.3g/(cu m.hr). Biofilter performance was evaluated over a 94-day period for three loading conditions intended to simulate processes generating contaminated gases only during daytime operation, daytime operation with weekend shutdown periods, and with long term (9-day) shutdown. Results indicate that fungal biofilters can be an effective alternative to conventional abatement technologies for treating solvent contaminated off-gases even under discontinuous loading conditions.

Spillage DisposalVentilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT wash away into sewer.

Toxicology

Body Burden2-Pentanone was detected, but not quantified, in 2 of 12 samples of human milk from 4 urban/industrial areas in the USA(1). 2-Pentanone was detected, not quantified in human milk samples from Jersey City and Bayonne, New Jersey(2).
Interactions · 2 items

Thresholds responses of odor, nasal pungency (irritation), and eye irritation were measured for single chemicals (1-propanol, 1-hexanol, ethyl acetate, heptyl acetate, 2-pentanone, 2-heptanone, toluene, ethyl benzene, and propyl benzene) and mixtures of them (two three-component mixtures, two six-component mixtures, and one nine-component mixture). Nasal pungency was measured in subjects lacking a functional sense of smell (i.e., anosmics) to avoid interference from olfaction. Various degrees of stimulus agonism (additive effects) were observed for each of the three sensory channels when testing mixtures. As the number of components and the lipophilicity of such components in the mixtures decreased, so did the degree of agonism. Synergistic stimulus agonism characterized the eye-irritation response for the most complex (the nine-component) and the most lipophilic (one of the six-component) mixtures. Physicochemical properties play a large role in the determination of sensitivity to airborne chemicals, particularly to their ability to evoke irritation. While this has revealed itself previously with respect to single chemicals, it seems to have relevance to mixtures as well.

Chloroform-induced liver injury was evaluated in male rats pretreated (15 mmol/kg, orally) with 2-pentanone. After 18 hr, a challenging dose of chloroform (0.50 or 0.75 mL/kg, ip) was given, it potentiated chloroform-induced liver damage. The severity of the potentiated hepatotoxic response increased significantly with the ketone C chain length.

Target OrgansEyes, skin, respiratory system, central nervous system
Ecotoxicity Values · 2 items

LC50 Pimephales promelas (Fathead minnow, age 32 days, mean length 18.4 mm, mean weight 0.095 g) 1240 mg/L/96 hr (95% confidence limit: 1190-1290 mg/L); flow through, 24.4 °C, pH 7.7, dissolved oxygen 7.2 mg/L, hardness 44.5 mg/L CaCO3, alkalinity 42.6 mg/L CaCO3 /97% purity/

EC50 Pimephales promelas (Fathead minnow, age 32 days, mean length 18.4 mm, mean weight 0.095 g) 1210 mg/L/96 hr; flow through, 24.4 °C, pH 7.7, dissolved oxygen 7.2 mg/L, hardness 44.5 mg/L CaCO3, alkalinity 42.6 mg/L CaCO3; Effect: Affected fish lost schooling behavior and swam in a corkscrew/spiral pattern near the tank surface. They were hyperactive and overreactive to external stimuli, had increased respiration and edema, were darkly colored, and lost equilibrium prior to death. /97% purity/

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 75(SRC), determined from a log Kow of 0.91(2) and a regression-derived equation(3), indicates that 2-pentanone is expected to have high mobility in soil(SRC). Volatilization of 2-pentanone from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 8.36X10-5 atm-cu m/mole(4). 2-Pentanone is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 35.4 mm Hg(5). 2-Pentanone has been shown to biodegrade under aerobic conditions(6-8).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 75(SRC), determined from a log Kow of 0.91(2) and a regression-derived equation(3), indicates that 2-pentanone is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 8.36X10-5 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 12 hours and 6.6 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 2-Pentanone is expected to biodegrade in water based on a screening test designed to simulate a polluted river, where the 5 day theoretical BOD for 2-pentanone was 43%(7).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-pentanone, which has a vapor pressure of 35.4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-pentanone is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 3.5 days(SRC), calculated from its rate constant of 4.56X10-12 cu cm/molecule-sec at 25 °C(3). 2-Pentanone contains chromophores that absorb at wavelengths >290 nm and therefore may be susceptible to direct photolysis by sunlight(4).

Food Survey Values · 2 items

/IT IS USED IN/ NON-ALCOHOLIC BEVERAGES AT 13 PPM; ICE CREAM, ICES, ETC 34 PPM; CANDY & BAKED GOODS AT 32 PPM.

2-Pentanone was detected at a concn of 0.01 ug/g in the volatiles of pineapples(1). 2-Pentanone was identified, not quantified, in the volatiles of blue cheese(2), cured pork(3), beef(4), bananas(5), mango(6), chickpea seeds(7), chicken, mutton and pork(8), kiwi(9), Beaufort cheese(10), roasted filberts(11), fish sauce(12), and dry cured and spoiled ham(13). 2-Pentanone was identified, not quantified, in the volatiles of bananas, white bread, soybeans, potato chips, and toasted oats(14). 2-Pentanone was detected at a concn of 45-245 ppb in dry beans, and 59 and 29 ppb in split peas and lentils(15).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation of its vapour and by ingestion.

inhalation, ingestion, skin and/or eye contact

Milk Concentrations · 1 item

ENVIRONMENTAL: 2-Pentanone was identified, not quantified, in milk samples from Australia(1). 2-Pentanone was detected, but not quantified, in 2 of 12 samples of human milk from 4 urban/industrial areas in the USA(2). 2-Pentanone was detected, not quantified in human milk samples from Jersey City and Bayonne, New Jersey(3).

Plant Concentrations · 2 items

REPORTED FOUND IN WOOD SPIRIT ... ALSO REPORTED PRESENT IN ANANAS SATIVUS ... FEW BANANA SPECIES, GRAPE VINES, & SOME CITRUS FRUITS. /FROM TABLE/

Trees and other plants including bay-leafed willow, European fir, evergreen cypress, red bilberry shrub, bilberry shrub, and fern emit 2-pentanone(1). 2-Pentanone has been found in split peas and lentils(2), pineapples(3), mango(4), chickpea seeds(5), kiwi(6) and bananas(7).

Signs and Symptoms · 5 items

Cough. Dizziness. Drowsiness. Lethargy. Headache. Sore throat.

Dry skin. Redness.

Redness. Pain.

Abdominal pain. Nausea. See Inhalation.

irritation eyes, skin, mucous membrane; headache; dermatitis; narcosis, coma

Effluent Concentrations · 1 item

2-Pentanone was identified in the effluent of 1 of 63 industrial plants in the US at a concn of less than 10 ppb(1). 2-Pentanone was detected in the effluent of a timber plant (median concn, 422.5 ppb); 5 organics and plastics plants (median concn, 40.4 ppb); 2 inorganic chemical producing plants (median concn, 108.1 ppb); 1 petroleum refinery (median concn, 8.3 ppb); 1 plastics and synthetics plant (median concn, 109.1 ppb); 5 pulp and paper products plants (median concn, 10.7 ppb); 2 oil and gas extraction facilities (median concn, 137.6 ppb); 3 public treatment facilities (median concn, 190.0 ppb)(2). 2-Pentanone was identified, not quantified, in the effluent of common household and garden waste in Denmark(3-6). 2-Pentanone was detected at a concn of 0.9 mg/L in the effluent of a shale oil retort facility in Logan Wash, Colorado(7). Air emissions of 2-pentanone (reported as percentage of total emissions) from various locations in Cairo, Egypt were identified with cyclohexene in regular whole (liquid) gas (3.01%), high grade whole (liquid) gas (2.73%) sampled directly from the pump at a gas station; along a roadway (2.32%), from a bus parking garage hot soak (0.69%), bus parking garage cold start (1.70%), motorcycle emissions (3.23%), petroleum refinery emissions (0.96%), lead smelter (0.36%), cast iron factory emissions (0.49%), and uncombusted natural gas (0.05%)(8). 2-Pentanone was found in highway tunnels in Tuscarora; light duty trucks emitted 0.043 mg/km traveled or 0.632 mg/L fuel used, heavy duty trucks emitted 0.973 mg/km traveled or 3.063 mg/L fuel used(9). 2-Pentanone was not found in rush hour traffic air samples taken at the Oakland-San Francisco Bay Bridge toll plaza 4/23/2001, 3-7 pm, 4/24/2001, 6-10 am, and 3-7 pm(10).

Regulatory information

FDA Requirements · 1 item

Methyl propyl ketone is a food additive permitted for direct addition to food for human consumption as a synthetic flavoring substance and adjuvant in accordance with the following conditions: a) they are used in the minimum quantity required to produce their intended effect, and otherwise in accordance with all the principles of good manufacturing practice, and 2) they consist of one or more of the following, used alone or in combination with flavoring substances and adjuvants generally recognized as safe in food, prior-sanctioned for such use, or regulated by an appropriate section in this part.

Safety data

OEB
A
OEL
TWA: 150 ppm (530 mg/m3)
wgk
1
IDLA
1,500 ppm
tsca
TSCA listed
rtecs
SA7875000
ridadr
UN 1249
hs_code
2914 19 90
Toxicity
LD50 orally in rats: 3.73 g/kg (Smyth)
risk_code
11-22-36/37/38
Signal word
Danger
Symbol(GHS)
GHS02,GHS06,GHS08
hazard_code
F,Xn
safety_code
9-16-29-33-37/39-26
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
II
Hazard statements
H331-H302-H316-H319-H335-H336-H305-H225
REACH Registrations
Active
Hazard Classifications
Acute Tox. 4 OralEye Irrit. 2Flam. Liq. 2
Autoignition Temperature
941 °F
Precautionary statements
P501-P261-P270-P240-P210-P233-P243-P241-P242-P271-P264-P280-P370+P378-P331-P337+P313-P305+P351+P338-P303+P361+P353-P332+P313-P301+P310-P304+P340+P311-P403+P233-P403+P235-P405
Hazardous Substances Data
107-87-9(Hazardous Substances Data)

Solvent

INT FOR COSMETICS & PHARMACEUTICALS; SOLVENT FOR SURFACE COATINGS, IN LACQUERS & IN LACQUER REMOVERS

Impurities... The commercial material consists of a mixture of methyl propyl and diethyl ketones in the approximate ratio of 3:1 and contains at least 97% of these ketones, the balance being sec-amyl alcohol. ...
U.S. Production · 3 items

2023: 10,000,000 - <25,000,000 lb

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#529]

2-Pentanone is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesSolvent
Methods of Manufacturing · 4 items

OXIDATION OF PENTAN-2-OL

DRY DISTILLATION OF A MIXTURE OF CALCIUM ACETATE & CALCIUM BUTYRAT FRIEDEL, ANNALEN, 108, 124, 1858. ALSO /PREPARED/ BY OXIDATION OF SODIUM OR AMMONIUM N-CAPROATE WITH HYDROGEN PEROXIDE.

Ethylene + methyl acetoacetate

From isoamyl chloride and sodamide in liquid ammonia; by reduction of isoamyl nitrile.

Formulations/Preparations · 2 items

Grade: Technical

90.0% PURITY PRODUCT AVAILABLE FROM EASTMAN CHEMICAL PRODUCTS, INC.

Household ProductsInformation on 16 consumer products that contain Methyl Propyl Ketone in the following categories is provided:
Use Classification · 4 items

Fragrance Ingredients

Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes

Flavoring Agents -> JECFA Flavorings Index

Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes

General Manufacturing Information · 2 items

Transportation Equipment Manufacturing

2-Pentanone: ACTIVE

Applications · 5 items

Description2-Pentanone or methyl propyl ketone (MPK) is a colorless liquid ketone with the odor of fingernail polish or a strong fruity odor. It was found in apple and can be isolated from soya oil (Glycine max), pineapple and a few other plant sources. It also occurs naturally in tobacco and blue cheese as a metabolic product of Penicillium mold growth. It is a solvent of minor importance that can be used for cleaning or degreasing and becoming part of product formulation or mixture. It is also an industrial intermediate and can be used for paint additives and coating additives. It is sometimes used in very small amounts as a flavoring food additive.

DescriptionMPK is a colorless to water-white liquid witha strong odor resembling acetone and ether. The odorthreshold is 7.7 ppm. Molecular weight = 86.15; Specificgravity (H2O:1) 5 0.81; Boiling point = 102℃; Freezing/Melting point 5 2 78℃; Vapor pressure 5 27 mmHg at20℃; Flash point = 7℃ (cc); Autoignition temperature 5452℃. Explosive limits: LEL 5 1.5%; UEL 5 8.2%.Hazard Identification (based on NFPA-704 M RatingSystem): Health 2, Flammability 3, Reactivity 0. Slightlysoluble in water; solubility 5 6%

OccurrenceReported found in wood spirit; also present in Ananas sativus; a few banana species, grapevines and some citrus fruits. Also reported found in over 120 foods and beverages including fresh apple, papaya, fresh blackberry, vinegar, wheaten bread, other types of bread, Swiss cheese, Camembert cheese, cheddar cheese, other cheeses, white wine, unprocessed rice, water yam, apricot, orange juice, guava, grapes, pear, pineapple, strawberry, asparagus, carrot, celery, peas, tomato, butter, yogurt, cream, milk powder, buttermilk, boiled egg, caviar, raw fish, cooked chicken and beef, pork fat, pork liver, hop oil, beer, cognac, rum, bourbon whiskey, white wine, cocoa, coffee, roasted filberts and peanuts, peanut oil, potato chips, oat flakes, honey, soybean, passion fruit, plum, beans, mushroom, starfruit, trassi, mango, globe artichoke, rice, soursop, malt, loquat, endive, shrimp, crab, lamb’s lettuce and cape gooseberry.

Uses2-Pentanone is used as a solvent for lacquers and surface coatings. It acts as a flavoring agent. It is also used as a solvent for cleaning and degreasing purpose. Further, it serves as an intermediate, paint additive and coating additive.

General DescriptionA clear colorless liquid with the odor of fingernail polish. Flash point 45°F. Less dense than water and soluble in water. Hence floats on water. Density 0.809 g / cm3. Vapors heavier than air.

Preparation methods

Preparation2-Pentanone was Prepared by dry distillation of a mixture consisting of calcium acetate and calcium butyrate; also by oxidation of sodium or ammonium n-caproate with H2O2.

Upstream & downstream products

Upstream raw materials

2-PentanolEthyl butyrylacetateHexanoic acidCalcium acetateCALCIUM BUTYRATE

Downstream products

Ethyl 1-methyl-5-propyl-1H-pyrazole-3-carboxylateEthyl 2,4-dioxoheptanoate1-Methyl-5-propyl-1H-pyrazole-3-carboxylic acid amide ,97%1-Methyl-4-nitro-3-propyl-1H-pyrazole-5-carboxylic acid1-Methyl-3-propyl-1H-pyrazole-5-carboxamide ,97%5-(2-Ethoxyphenyl)-1-methyl-3-n-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]-7-pyrimidinone1-Methyl-3-propyl-1H-pyrazole-5-carbohydrazide ,97%Ketanserin5-Bromo-pentan-2-one4-methyldocosane1-Methyl-3-propylpyrazole-5-carboxylic acid4-methylpentadecane2-Pentanonecyanohydrin (4111-09-5)1-Methyl-3-propyl-1H-pyrazole-5-carboxylic acid ethyl ester1-Methyl-5-propyl-1H-pyrazole-3-carboxylic acidUndecane,4-methyl-4-Methylhexadecane4-Methyltetradecane5-Ketohexanenitrile(NE)-N-pentan-2-ylidenehydroxylamine

Additional notes

DefinitionChEBI: 2-Pentanone is a pentanone carrying an oxo substituent at position 2. It has a role as a plant metabolite. It is a methyl ketone and a pentanone.