[CH2:1]([O:3][C:4]([C:6]1([NH2:15])[CH2:14][C:13]2[C:8](=[CH:9][CH:10]=[CH:11][CH:12]=2)[CH2:7]1)=[O:5])[CH3:2].C(Cl)Cl.CCN(C(C)C)C(C)C.[Cl:28][C:29]1[C:34]([C:35](Cl)=[O:36])=[CH:33][C:32]([Cl:38])=[CH:31][N:30]=1>CN(C1C=CN=CC=1)C.CC(O)C.C(Cl)Cl>[CH2:1]([O:3][C:4]([C:6]1([NH:15][C:35]([C:34]2[C:29]([Cl:28])=[N:30][CH:31]=[C:32]([Cl:38])[CH:33]=2)=[O:36])[CH2:14][C:13]2[C:8](=[CH:9][CH:10]=[CH:11][CH:12]=2)[CH2:7]1)=[O:5])[CH3:2]A 30 mL reaction vial is charged with 2-aminoindan-2-carboxylic acid ethyl ester (1 g, 4.87 mmol) and dry DCM (5 mL). A stirring bar is added and stirring is initiated. DIPEA (1.35 mL, 7.8 mmol) is added. 2,5-dichloro-pyridine-3-carbonyl chloride (1.23 g, 5.85 mmol) and DMAP (8 mg, cat.) are added. The reaction is capped. After 57 days, tlc analysis (silica, 10% iPrOH/DCM) indicates that the starting has been completely consumed. The contents of the reaction flask are transferred to a separatory funnel and diluted with EtOAc (60 mL). This is washed with water (2×25 mL), saturated aqueous NaHCO3 (2×25 mL), and brine (25 mL), and then dried over MgSO4, filtered and evaporated by pumping to constant weight yields 1.99 g of off-white solid. This is diluted with DCM (20 mL) and applied to a silica column ((80 g) on an ISCO Companion. The column is eluted with 5% EtOAc in heptanes for 3 column volumes followed by a linear gradient to 75% EtOAc in heptanes over 12 column volumes. 17 mL fractions of UV positive eluent are collected. Fraction 12-16 are combined and evaporated by pumping to constant weight to give light yellow solid (1.39 g, 75%).