[CH3:1][O:2][C:3]1[CH:12]=[CH:11][CH:10]=[C:9]2[C:4]=1[CH2:5][CH2:6][C@H:7]([CH3:13])[NH:8]2.[ClH:14]>C(OCC)(=O)C>[ClH:14].[CH3:1][O:2][C:3]1[CH:12]=[CH:11][CH:10]=[C:9]2[C:4]=1[CH2:5][CH2:6][C@H:7]([CH3:13])[NH:8]2A three-necked, 1-L round-bottomed flask equipped with an overhead stirrer, thermocouple, and nitrogen inlet was charged with a solution of crude (S)-5-methoxy-2-methyl-1,2,3,4-tetrahydroquinoline (59.9 g, 338 mmol) in ethyl acetate (600 mL). To this solution was then added the freshly prepared HCl solution (ca. 2 M in ethanol, 86 mL, 372 mmol) at 17° C. As the HCl solution was being added, the mixture initially became cloudy but then became a clear solution upon complete addition. The internal temperature rose to 26° C. The clear solution was stirred at ambient temperature, and after 10-15 min, a granular precipitate formed. The slurry was stirred at ambient temperature for 4.5 h, then filtered on a glass, 600-mL Buchner funnel. The flask and solids were rinsed with fresh ethyl acetate, filtered, and dried on the filter under suction and a positive pressure of nitrogen to afford (S)-5-methoxy-2-methyl-1,2,3,4-tetrahydroquinoline hydrochloride (64.43 g, 89%) as a cream-colored, free-flowing, granular solid. Chiral HPLC analysis showed the salt to have an enantiopurity of 98.9:1.1 e.r. (97.8% ee). (Chiral HPLC method: Column: ODH; Method: ODH 98% Hexane 2% IPA; UV:254, Flow: 0.5 mL/min). MS (ES, m/z): 178 [M+H]+