[C:1]1([C:16]2[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=2)[CH:6]=[CH:5][CH:4]=[CH:3][C:2]=1[C:7]([OH:15])([C:9]#[C:10][CH2:11]N(C)C)[CH3:8].[OH-].[Na+].C(OCC)C>O1CCCC1.C1C=CC=CC=1.CCCCC>[C:1]1([C:16]2[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=2)[CH:6]=[CH:5][CH:4]=[CH:3][C:2]=1[C:7]([OH:15])([CH:9]=[C:10]=[CH2:11])[CH3:8]To a suspension of 507 g of the crude (foam) methiodide of 2-(p-biphenylyl)-5-dimethylamino-3-pentyn-2-ol obtained by step (b) above, in 4 liters of dry tetrahydrofuran, is added dropwise over a period of one hour, with cooling(to keep at room temperature), 478 g of a solution of sodium dihydrobis (2-methoxyethoxy) aluminate 70% w/w in benzene in 800 ml of dry tetrahydrofuran. The resulting mixture is then stirred at room temperature for 2 hours. The mixture is then cooled to 10° and dropwise there is added 3 liters of 2N sodium hydroxide, with stirring and cooling to 10° to 20°. 10 liters of diethyl ether are then added, in one portion, to the mixture. Solids present (inorganic salts) are removed by filtration on Celite. The filtrate is then extracted twice with 5 liter portions of water, the water washes then being washed three times with 5 liters of diethyl ether each time. The combined ether phases are washed once with 3 liters of aqueous saturated brine solution. The combined organic phases are dried over sodium sulfate, filtered, and the filtrate evaporated by rotary evaporation at 40° to obtain the crude product as an oil. The oil is taken up in 7 liters pentane (heated) and then the resulting pentane solution chilled until a precipitate forms. The precipitate is collected by filtration and washed with pentane. The precipitate is crystallized from pentane five times, then dried in a vacuum oven at room temperature for 12 hours to yield the title product, m.p. 65°-66°.