C(N1CCC(CO)C(O)C1)C1C=CC=CC=1.ClC(OCC1C=CC=CC=1)=O.[OH-].[Na+].[CH2:30]([O:37][C:38]([N:40]1[CH2:45][CH2:44][C@@H:43]([CH2:46][OH:47])[C@H:42]([OH:48])[CH2:41]1)=[O:39])[C:31]1[CH:36]=[CH:35][CH:34]=[CH:33][CH:32]=1>CO.O.O1CCOCC1.[OH-].[OH-].[Pd+2]>[CH2:30]([O:37][C:38]([N:40]1[CH2:45][CH2:44][CH:43]([CH2:46][OH:47])[CH:42]([OH:48])[CH2:41]1)=[O:39])[C:31]1[CH:32]=[CH:33][CH:34]=[CH:35][CH:36]=1A solution of the 1-benzyl-4-hydroxymethyl-piperidin-3-ol from Step 1 above (13.5 g) in methanol (450 mL) was hydrogenated at 50 psi over 20% palladium hydroxide on charcoal (10 g) for 48 h in three batches. The combined reaction mixtures were filtered and the filtrate evaporated to give an oil. This was dissolved in water (100 mL) and dioxane (100 mL), cooled to 5° C., and benzyl chloroformate (7.8 mL) was added slowly, with addition of 1M NaOH to maintain a pH of 10–11. After 30 min, the cooling bath was removed and reaction mixture stirred for 30 min. The reaction mixture was concentrated to remove dioxane and the residue extracted with EtOAc (×3). The combined extracts were washed with brine, dried over anhydrous sodium sulfate and solvent evaporated to give a mixture of cis and trans 3-hydroxy-4-hydroxymethyl-piperidine-1-carboxylic acid benzyl ester products. Purification by flash column chromatography (80% EtOAc hexane to 5% MeOH EtOAc) gave the upper Rf cis isomer (major) and the lower Rf trans isomer (minor).