[Mg].BrCCBr.Br[CH:7]([CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH3:33])[C:8]([O:10][C@H:11]([CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27])[CH2:12][C:13]([O:15]C)=O)=[O:9]>C1COCC1>[CH2:28]([C:7]1[C:8](=[O:9])[O:10][C@H:11]([CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27])[CH2:12][C:13]=1[OH:15])[CH2:29][CH2:30][CH2:31][CH2:32][CH3:33]To a 1-L, 3-necked, round-bottomed flask fitted with a Claisen adapter with N2 inlet, a West condenser and a thermocouple-J-KEM controller and a rubber septum was added 13.9 g (0.572 g-atom, 3.2 equiv.) of magnesium (from Chromasco) was added. A small flake of 12 (about 45 mg) was added and the mixture was heated to about 80° C. 1,2-Dibromoethane (3.4 g, 18 mmol) and 350 mL of THF were added to the hot Mg/I2 mixture to activate the metal surface. Methyl (3R)-3-[(2-bromo-1-oxooctyl)oxy]-tetradecanoate (82.9 g, 179 mmol) from Example 2,1,2-dibromoethane (33.6 g, 179 mmol) and 400 mL of THF were added to the addition funnel. This mixture was slowly added to the Mg/THF mixture at reflux over about 1 h. The reaction mixture was stirred overnight (14 h) at about 60° C. The resulting yellow solution was decanted away from the metal into a 1-L, round-bottomed flask. The residual Mg metal was rinsed twice with 60 mL of THF. The combined THF solution was concentrated on a rotary evaporator. The syrupy mixture was taken up in 1750 mL of methylene chloride and added to a mixture of 500 mL of water, 200 mL of ice and 98 mL of 10% HCl in a separatory funnel. The aqueous layer was removed, the organic layer washed once with 200 mL of saturated sodium chloride, dried (NaSO4), filtered, and the solvent removed on a rotary evaporator. The crude white solid (66.7 g) was slurried in 100 mL of hexane, cooled to 0° C., filtered, and rinsed twice with 50 mL of cold hexane. The isolated white solid was dried in an oven at 40° C. under reduced pressure (10 mm Hg) overnight resulting in 28.4 g of (6R)-3-hexyl-4-hydroxy-6-undecyl-5,6-dihydropyran-2-one (45-50% yield based on methyl (R)-3-hydroxytetradecanoate).