HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Epichlorohydrin → Oxirane, 2-[[(6-methylheptyl)oxy]methyl]-

HRID 373335
Print

Reaction equation

HRID 373335 reaction equation
[CH2:1]([OH:9])[CH2:2][CH2:3][CH2:4][CH2:5][CH:6]([CH3:8])[CH3:7].[CH2:10]([CH:12]1[O:14][CH2:13]1)Cl.[OH-].[Na+]>O.O.Cl[Sn]Cl.C1OCCOCCOCCOCCOCCOC1>[CH2:10]([O:9][CH2:1][CH2:2][CH2:3][CH2:4][CH2:5][CH:6]([CH3:8])[CH3:7])[CH:12]1[O:14][CH2:13]1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

6

Reactant 3

HCID 7835EpichlorohydrinHCID 14798Sodium HydroxideHCID 15450Isooctan-1-ol

Product 1

HCID 22571168Oxirane, 2-[[(6-methylheptyl)oxy]methyl]-Yield 90%

Reagents, catalysts & solvents 2

HCID 2855718-Crown-6Catalyst
HCID 61436
Stannous chloride dihydrate
Catalyst

Conditions

Temperature
130 °C

Procedure

A reactor equipped with stirrer, reflux condenser, dropping funnel and thermometer is charged with 130.23 g (1.0 mol) of isooctanol (mixture of isomers), 4.51 g (0.02 mol) of SnCl2.2H2O and 5.28 g (0.02 mol) of 18-crown-6 (crown ether) and the charge is heated to 130° C. Then, with efficient stirring, 86.26 ml (1.1 mol) of epichlorohydrin are added over 30 minutes. The reaction is allowed to continue for 20 hours, during which time the temperature rises to about 135° C. The reaction mixture is cooled to 55° C. and then, at this temperature, 88 g (1.1 mol) of a 50% solution of sodium hydroxide are added dropwise with efficient stirring over 30 minutes. After stirring for 5 hours at 55°-60° C. and cooling to room temperature, the suspension is filtered and the filtrate is washed with ethyl acetate. The phases are separated, and the aqueous phase is extracted with 2×100 ml of ethyl acetate. The combined organic phases are washed with as small an amount of 10% KH2PO4 solution as possible and then with water until neutral, dried over magnesium sulfate and filtered. The filtrate is freed from solvent on a rotary evaporator under vacuum (bath temperature 50° C.). Yield: 167.4 g (90% of theory) of yellowish isooctanol glycidyl ether (mixture of isomers) for which the following analytical values are obtained: epoxy value: 3.93 eq/kg (73% of theory); total chlorine content: 2.44%; hydrolysable chlorine content: 232 ppm.

Workup

  1. customA reactor equipped with stirrer
  2. temperaturereflux condenser
  3. customrises to about 135° C
  4. temperatureThe reaction mixture is cooled to 55° C.
  5. stirringAfter stirring for 5 hours at 55°-60° C.
  6. temperaturecooling to room temperature
  7. filtrationthe suspension is filtered
  8. washthe filtrate is washed with ethyl acetate
  9. customThe phases are separated
  10. extractionthe aqueous phase is extracted with 2×100 ml of ethyl acetate
  11. washThe combined organic phases are washed with as small an amount of 10% KH2PO4 solution as possible and then with water until neutral,
  12. dry with materialdried over magnesium sulfate
  13. filtrationfiltered
  14. customThe filtrate is freed from solvent on a rotary evaporator under vacuum (bath temperature 50° C.)

Sources & evidence

ORD record
ord-898ed2a86cef4afda796d1d682937583
Source dataset
uspto-grants-1992_11
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US05162547

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes