HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Pyridine → Methyl 2-trifluoromethanesulfonyloxy-1-naphthoate

HRID 430037
Print

Reaction equation

HRID 430037 reaction equation
[F:1][C:2]([F:15])([F:14])[S:3]([O:6]S(C(F)(F)F)(=O)=O)(=[O:5])=[O:4].O[C:17]1[CH:26]=[CH:25][C:24]2[C:19](=[CH:20][CH:21]=[CH:22][CH:23]=2)[C:18]=1[C:27]([O:29][CH3:30])=[O:28].N1C=CC=CC=1.C(OC)(C)(C)C>ClCCl>[F:1][C:2]([F:15])([F:14])[S:3]([O:6][C:17]1[CH:26]=[CH:25][C:24]2[C:19](=[CH:20][CH:21]=[CH:22][CH:23]=2)[C:18]=1[C:27]([O:29][CH3:30])=[O:28])(=[O:5])=[O:4]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

6

Reactant 4

HCID 1049PyridineHCID 15413tert-Butyl methyl etherHCID 67749Trifluoromethanesulfonic anhydrideHCID 598533Methyl 2-hydroxy-1-naphthoate

Product 1

HCID 11034997Methyl 2-trifluoromethanesulfonyloxy-1-naphthoate

Reagents, catalysts & solvents 1

HCID 6344
Dichloromethane
Solvent
2×

Procedure

Trifluoromethanesulfonic anhydride (492 g, 1.74 mol, 1.1 eq) in dichloromethane (0.5 L) was added over 1.5 hours to a suspension of methyl 2-hydroxy-1-naphthoate (319 g, 1.58 mol) and pyridine (330 ml, 4.08 mol, 2.6 eq) in dichloromethane (1.7 L) maintained at an internal temperature between −70 and −50° C., under nitrogen. Once the addition was complete, the mixture was allowed to warm to ambient temperature and stirred for 16 hours, after which time all solids had dissolved. Methyl tert-butyl ether (MTBE, 2.5 L) was added, causing precipitation. The solids were removed by filtration and washed with MTBE (0.5 L). The MTBE solutions were combined and washed with 2 N HCl(aq) (0.3 L then 0.2 L), water (2×2.5 L) and brine (2 L). The organic layer was dried (MgSO4), filtered and concentrated under reduced pressure. The residue was dissolved in toluene (2.5 L) and washed with 1 N NaOH (aq) (0.5 L), water (2.5 L) and brine (1 L). The toluene solution was dried (MgSO4), filtered and concentrated under reduced pressure. Initially a slightly brown oil, the product crystallised on standing. Yield 438.5 g, 83%

Workup

  1. temperaturemaintained at an internal temperature between −70 and −50° C., under nitrogen
  2. additionOnce the addition
  3. dissolutionafter which time all solids had dissolved
  4. customprecipitation
  5. customThe solids were removed by filtration
  6. washwashed with MTBE (0.5 L)
  7. washwashed with 2 N HCl(aq) (0.3 L
  8. dry with materialThe organic layer was dried (MgSO4)
  9. filtrationfiltered
  10. concentrationconcentrated under reduced pressure
  11. dissolutionThe residue was dissolved in toluene (2.5 L)
  12. washwashed with 1 N NaOH (aq) (0.5 L), water (2.5 L) and brine (1 L)
  13. dry with materialThe toluene solution was dried (MgSO4)
  14. filtrationfiltered
  15. concentrationconcentrated under reduced pressure
  16. customInitially a slightly brown oil, the product crystallised

Sources & evidence

ORD record
ord-8d1a33fc017a45e8907533a710981894
Source dataset
uspto-grants-2001_11
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US06320068B1

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes