HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Styrene → (2-Phenylethyl)trichlorosilane

HRID 442051
Print

Reaction equation

HRID 442051 reaction equation
[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[Cl:9][SiH:10]([Cl:12])[Cl:11].[SiH4]>[H+].[H+].Cl[Pt-2](Cl)(Cl)(Cl)(Cl)Cl.COC.C=C.C(C1C(C)=CC=C(O)C=1C(C)(C)C)(C)(C)C>[C:3]1([CH2:2][CH2:1][Si:10]([Cl:12])([Cl:11])[Cl:9])[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

8

Reactant 3

HCID 7501StyreneHCID 23953SilaneHCID 24811Trichlorosilane

Product 1

HCID 70327(2-Phenylethyl)trichlorosilaneYield 94.2%

Reagents, catalysts & solvents 4

HCID 61859Chloroplatinic acidCatalyst
HCID 3034427
Phenol, bis(1,1-dimethylethyl)-4-methyl-
Catalyst
HCID 6325EthyleneSolvent
HCID 8254Dimethyl EtherSolvent

Conditions

Temperature
90 °C

Procedure

About 468 grams (4.5 moles) of styrene and about 0.5 grams of di-t-butyl-p-cresol were charged to a one liter, three necked round bottom flask fitted with a magnetic stirrer, thermometer, dropping funnel and reflux condenser bearing a nitrogen by-pass on the vent. While stirring the flask contents were heated to 90° C, and a sufficient amount of about a 2% solution of chloroplatinic acid catalyst dissolved in dimethylether of ethylene glycok to give about 25 parts by weight of plantinum per million parts by weight of reactants was added. Then about 610 grams (4.5 moles) of trichlorosilane were slowly and continuously added via the dropping funnel over a one and one-half hour period while maintaining the reaction temperature at 90°-95° C. A vapor phase chromatogram on the reaction contents indicated there was an essentially complete conversion to product. The crude silane reaction product was then refined by a one plate distillation at 0.1 mm. pressure to yield about 1015 grams (4.24 moles) of phenylethyltrichlorosilane product ##STR22## (94.5% conversion) which had a boiling point of about 63°-64° C./0.1 mm Hg.

Workup

  1. customfitted with a magnetic stirrer
  2. temperaturereflux condenser
  3. customto give about 25 parts by weight of plantinum per million parts by weight of reactants
  4. additionwas added
  5. additioncontinuously added via the dropping funnel over a one and one-half hour period
  6. temperaturewhile maintaining the reaction temperature at 90°-95° C
  7. customA vapor phase chromatogram on the reaction contents
  8. distillationwas then refined by a one plate distillation at 0.1 mm

Sources & evidence

ORD record
ord-00e0f416c9bb42c99dc3dae430b350ce
Source dataset
uspto-grants-1977_08
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04044037

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes