[CH2:1]([O:8][C:9]1[CH:18]=[C:17]2[C:12]([C:13]([OH:19])=[CH:14][CH:15]=[N:16]2)=[CH:11][C:10]=1[O:20][CH3:21])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.N1C(C)=CC=CC=1C.C(=O)=O.[F:33][C:34]([F:40])([F:39])[S:35](Cl)(=[O:37])=[O:36]>CN(C)C1C=CN=CC=1.O.C(Cl)Cl>[CH2:1]([O:8][C:9]1[CH:18]=[C:17]2[C:12]([C:13]([O:19][S:35]([C:34]([F:40])([F:39])[F:33])(=[O:37])=[O:36])=[CH:14][CH:15]=[N:16]2)=[CH:11][C:10]=1[O:20][CH3:21])[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1To a dry 2 L RBF containing 7-benzyloxy-6-methoxyquinolin-4-ol (75.3 g, 267 mmol) was added DCM (1 L), 4-dimethylaminopyridine (3.28 g, 26.8 mmol) and 2,6-lutidine (62 mL, 534 mmol). The mixture was cooled to −20° C. by controlled addition of dry ice to an acetone bath. Trifluoromethanesulfonyl chloride (37 mL, 350 mmol) was added dropwise to the cooled solution with magnetic stirring over 25 minutes. After addition was complete, the mixture was stirred in bath for 20 minutes, then at room temperature for 3 hours. LCMS indicated reaction completion. The reaction mixture was concentrated in vacuo and placed under high vacuum to remove residual 2,6-lutidine. To the resulting brown solids was added methanol (3.5 L). The resulting slurry was stirred with mechanical stirrer for 30 min before adding water (1.5 L). The solids were isolated by filtration, followed by a water wash. The resulting solid was dried under high vacuum overnight yielding trifluoromethanesulfonic acid 7-benzyloxy-6-methoxy-quinolin-4-yl ester as a light brown solid (92.2 g, 83.8%). 1H NMR (400 MHz, DMSO, d6): δ 8.82 (d, 1H), 7.67 (s, 1H), 7.59 (d, 1H), 7.54-7.52 (m, 2H), 7.46-7.42 (m, 2H), 7.39-7.36 (m, 1H), 7.23 (s, 1H), 5.35 (s, 2H), 3.97 (s, 3H). LC/MS: M+H=414.