[CH2:1]([C:5]1[NH:6][C:7](=O)[C:8]2[NH:13][N:12]=[C:11]([I:14])[C:9]=2[N:10]=1)[CH2:2][CH2:3][CH3:4].F[P-](F)(F)(F)(F)F.N1(O[P+](N(C)C)(N(C)C)N(C)C)C2C=CC=CC=2N=N1.N12CCCN=C1CCCCC2.[CH3:54][O:55][C:56]1[CH:57]=[C:58]([CH2:64][NH2:65])[CH:59]=[CH:60][C:61]=1[O:62][CH3:63]>CN(C=O)C>[CH2:1]([C:5]1[N:6]=[C:7]([NH:65][CH2:64][C:58]2[CH:59]=[CH:60][C:61]([O:62][CH3:63])=[C:56]([O:55][CH3:54])[CH:57]=2)[C:8]2[NH:13][N:12]=[C:11]([I:14])[C:9]=2[N:10]=1)[CH2:2][CH2:3][CH3:4]To a solution of 5-butyl-3-iodo-1H-pyrazolo[4,3-d]pyrimidin-7(6H)-one (5 g, 15.72 mmol) and (benzotriazol-1-yloxy)tris(dimethylamino)phosphonium hexafluorophosphate (10.43 g, 23.58 mmol) in anhydrous DMF (250 mL) at room temperature under a nitrogen atmosphere was added 1,8-diazabicyclo[5.4.0]undec-7-ene (4.23 mL, 28.3 mmol) and the reaction mixture was stirred for 2.5 hours. (3,4-Dimethoxyphenyl)methanamine (20 mL, 94 mmol) was added and the mixture was warmed to 40° C. for 3 hours. The reaction mixture was evaporated in-vacuo and the resulting oil partitioned between ethyl acetate and water. The organic layer was separated, washed with brine, dried over MgSO4, filtered and evaporated in-vacuo to yield as a semi-crystalline yellow oil (23.7 g). The residue was absorbed onto Florosil, loaded onto a 330 g silica pre-conditioned cartridge and purified by chromatography using cyclohexane over 1 column volume followed by 0-100% ethyl acetate in cyclohexane gradient over 14 column volumes followed by ethyl acetate over 4 column volumes. Appropriate fractions containing only the desired material by LC-MS analysis were combined and evaporated in-vacuo to yield the title compound as a pale yellow foam (4.58 g).