5,5'-Bi-2-benzofuran-1,1',3,3'-tetrone
2420-87-3O=C1OC(=O)c2cc(-c3ccc4c(c3)C(=O)OC4=O)ccc21WKDNYTOXBCRNPV-UHFFFAOYSA-N2420-87-3DTXSID8044886CHEMBL3185102安全情報は参考情報です。供給元の安全データシート(SDS)、適用法令、専門家による評価に代わるものではありません。
This chemical does not meet GHS hazard criteria for 23% (17 of 74) of reports.
Warning
H315 (71.6%): Causes skin irritation [Warning Skin corrosion/irritation]
P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 74 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
[5,5'-Biisobenzofuran]-1,1',3,3'-tetrone is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of [5,5'-Biisobenzofuran]-1,1',3,3'-tetrone are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: 4,4'-biphthalic dianhydride (EC: 219-342-9)
All Other Chemical Product and Preparation Manufacturing
[5,5'-Biisobenzofuran]-1,1',3,3'-tetrone: ACTIVE
用途有機合成原料。
用途BPDA(3,3',4,4'-ビフェニルテトラカルボン酸ニ無水物)はスーパーエンジニアリングプラスチックスの一つであるポリイミド樹脂の原料であり、携帯電話、複写機等情報電子分野の多くの製品の重要な部品材料として使用されています。 ポリイミドは、耐熱プラスチックフィルム、電子回路、複写機?プリンターの中間転写ベルトや定着ベルト、カラーレジストインキ等に使用されています。
使用3,3',4,4'-biphenyltetracarboxylic dianhydride be used for the preparation of a polyimide material.
一般的な説明3,3′,4,4′-Biphenyltetracarboxylic dianhydride (s-BPDA) is a rigid symmetric polyamide with a diamine having a long distance between amine groups and reactive endgaps.
製造方法The preparation of 3,3',4,4'-Biphenyltetracarboxylic dianhydride is as follows:In a nitrogen atmosphere, add N-(3-N,N-dimethylamino-propyl)-4-chlorophthalimide (26.65g, 0.1moL),Zinc powder (3.25g, 0.05moL), anhydrous NiCl2 (127.5mg, 1mmoL),Triphenylphosphine (250mg, 1mmoL) and 70 mL of anhydrous DMAc were stirred at 50°C for 24 hours, and 55mL of solvent DMAc was recovered under reduced pressure. Add 80g of xylene to the system and reflux (recrystallize), filter out the inorganic matter, the clarified filtrate will be cooled and precipitated, filtered, and vacuum dried for 10 hours. 21.8g of 3,3',4,4'-biphenylbisimine was obtained with a yield of 94%. In a 100mL reaction flask, add 4.62g (0.01mol) of the above 3,3',4,4'-biphenylbisimine and 9g of 20% sodium hydroxide aqueous solution, and heat to reflux for 24 hours. Filter and adjust pH=1 with concentrated hydrochloric acid to obtain 3,3’,4,4’-biphenyltetracarboxylic acid. After filtering, wash with water three times and reflux with water with 20mL trimethylbenzene.2.85g of white 3,3′,4,4′-biphenyltetracarboxylic dianhydride was obtained, the yield was 97%.
化学的特性BPDA (3,3',4,4'-Biphenyltetracarboxylic dianhydride) is a raw material for the polyimide resin component of one of the super-engineering plastics. It is used for many important information and electronic technology products such as mobile phones and copying machines.