ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ethylene Glycol → 2-Hydroxyethyl n,n,n',n'-tetrakis(2-chloroethyl)phosphorodiamidate

HRID 1634007
印刷

反応式

HRID 1634007 の反応式
[Cl:1][CH2:2][CH2:3][N:4]([CH2:15][CH2:16][Cl:17])[P:5](Cl)([N:7]([CH2:11][CH2:12][Cl:13])[CH2:8][CH2:9][Cl:10])=[O:6].[CH2:18]([OH:21])[CH2:19][OH:20].CC(C)([O-])C.[K+].Cl>O.C(OC)(C)(C)C.O1CCCC1>[OH:20][CH2:19][CH2:18][O:21][P:5]([N:4]([CH2:3][CH2:2][Cl:1])[CH2:15][CH2:16][Cl:17])([N:7]([CH2:8][CH2:9][Cl:10])[CH2:11][CH2:12][Cl:13])=[O:6]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

8

反応物 4

HCID 174Ethylene GlycolHCID 313Hydrochloric AcidHCID 428391N,N,N',N'-Tetrakis(2-chloroethyl)phosphorodiamidic ChlorideHCID 23665647Potassium tert-butoxide

生成物 1

HCID 98866832-Hydroxyethyl n,n,n',n'-tetrakis(2-chloroethyl)phosphorodiamidate

試薬・触媒・溶媒 3

HCID 962
Water
溶媒
HCID 8028Tetrahydrofuran溶媒
HCID 15413tert-Butyl methyl ether溶媒

反応条件

温度
0 °C

実験手順

A 12-L, three-neck, round-bottom flask was equipped with an overhead mechanical stirrer, a thermometer and a nitrogen inlet/outlet bubbler. The flask was charged with N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidic chloride (979 g, 2.68 moles), 2, ethylene glycol (1.5 L, 26.8 moles), 4 and tetrahydrofuran (3 L). The stirrer was set to agitate at a moderate rate (to provide a clear red solution) and the mixture was cooled to 0° C. using an ice/water bath. To this cooled solution was added potassium tert-butoxide (362 g, 3.22 moles) over 20 minutes. The reaction mixture was then slowly warmed to room temperature and stirred for a total of 19 hours. A solution of hydrogen chloride in water (8 L, 1M) was introduced into the flask over 10 minutes. The organic fraction was collected and the aqueous fraction was extracted with ethyl acetate (2×4 L). The combined organic fractions were washed with saturated aqueous sodium chloride solution (1×4 L) and the solvents were removed under reduced pressure (30 mm Hg vacuum, final bath temperature at 50° C.) on a rotary evaporator to provide a dark reddish brown oil. This crude organic product was then dissolved with warm (40° C.) methyl tert-butyl ether (2 L) and allowed to cool to room temperature, stirring for a total of 14 hours. The resulting slurry was stirred for 30 minutes at 0° C. after which the precipitate was collected by vacuum filtration and washed with cold methyl tert-butyl ether (1 L). The combined filtrates were concentrated under reduced pressure (30 mmHg vacuum, final bath temperature at 50° C.) on a rotary evaporator to a volume of 500 mL and stirred for 30 minutes at 0° C. The resulting precipitate was collected by vacuum filtration and washed with cold methyl tert-butyl ether (200 mL). Two crops of solid product were then combined and dried overnight (30 mm Hg, 40° C.) to produce 2-hydroxyethyl-N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 3, as a tan powder (526 gm, 50% yield). TLC analysis showed one spot (Rf0.62; methanol:chloroform 1:9). Melting point: 76-78° C.; IR (KBr) 3372, 2957, 1459, 1344, 1206, 1098, 1053, 929 cm−1; MS (CI, methane) m/z 391(MH+), 353, 339, 248, 106. A thermal analysis (DSC) showed two exothermic decomposition ranges of 164-179 and 222-231 C.

後処理

  1. customto provide a clear red solution) and the mixture
  2. temperatureThe reaction mixture was then slowly warmed to room temperature
  3. stirringstirred for a total of 19 hours
  4. customThe organic fraction was collected
  5. extractionthe aqueous fraction was extracted with ethyl acetate (2×4 L)
  6. washThe combined organic fractions were washed with saturated aqueous sodium chloride solution (1×4 L)
  7. customthe solvents were removed under reduced pressure (30 mm Hg vacuum
  8. customfinal bath temperature at 50° C.) on a rotary evaporator
  9. customto provide a dark reddish brown oil
  10. dissolutionThis crude organic product was then dissolved
  11. temperatureto cool to room temperature
  12. stirringstirring for a total of 14 hours
  13. stirringThe resulting slurry was stirred for 30 minutes at 0° C. after which the precipitate
  14. filtrationwas collected by vacuum filtration
  15. washwashed with cold methyl tert-butyl ether (1 L)
  16. concentrationThe combined filtrates were concentrated under reduced pressure (30 mmHg vacuum
  17. customfinal bath temperature at 50° C.) on a rotary evaporator to a volume of 500 mL
  18. stirringstirred for 30 minutes at 0° C
  19. filtrationThe resulting precipitate was collected by vacuum filtration
  20. washwashed with cold methyl tert-butyl ether (200 mL)
  21. customdried overnight (30 mm Hg, 40° C.)

出典と根拠

ORDレコード
ord-7c896305866b493383d71a876f72392c
出典データセット
uspto-grants-2003_01
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06506739B1

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート