ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Tetrahydrofuran → 1-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide

HRID 1890124
印刷

反応式

HRID 1890124 の反応式
[CH:1]([P:3]([CH:14]=[CH2:15])([C:5]1[CH:10]=[CH:9][C:8]([N+:11]([O-:13])=[O:12])=[CH:7][CH:6]=1)=[O:4])=[CH2:2].[OH-].[Na+].O1CCCC1.Cl.[CH2:24]([NH2:26])[CH3:25].C(=O)(O)[O-].[Na+]>O>[CH2:24]([N:26]1[CH2:2][CH2:1][P:3](=[O:4])([C:5]2[CH:6]=[CH:7][C:8]([N+:11]([O-:13])=[O:12])=[CH:9][CH:10]=2)[CH2:14][CH2:15]1)[CH3:25]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 5

HCID 8028TetrahydrofuranHCID 11198Ethylamine hydrochloride2 回HCID 14798Sodium HydroxideHCID 516892Sodium BicarbonateHCID 580713594-(Divinyl-phosphinoyl)nitro benzene

生成物 1

HCID 674791721-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide

試薬・触媒・溶媒

1
HCID 962Water溶媒2 回

反応条件

温度
105 °C

実験手順

A mixture of 1-bromo-4-nitrobenzene (400 mg, 2.00 mmol), tetrakis(triphenylphosphine)palladium(0) (120 mg, 0.20 mmol) and cesium carbonate (734 mg, 2.2 mmol) in a 30 mL microwave vial was purged and backfilled with nitrogen. Tetrahydrofuran (20 mL) was added followed by diethyl phosphite (0.360 mL, 2.8 mmol). The mixture was vortexed, then microwaved for 45 minutes at 120° C. Reaction was repeated three times to achieve total scale then the combined reaction mixtures were purified via chromatography (120 g silica gel 5%→75% ethyl acetate in hexane). (4-Nitro-phenyl)-phosphonic acid diethyl ester isolated as a light yellow oil (969 mg, 47%). 1H NMR (400 MHz, (D3C)2SO, δ, ppm): 8.35 (d, J=8.0 Hz, 2H), 7.16 (s, 1H), 5.93 (s, 2H), 3.40 (s, 4H), 2.36 (s, 4H), 2.20 (s, 3H), 8.05-7.95 (m, 2H), 4.09 (m, 4H), 1.25 (t, J=13.8, 7.4 Hz, 6H). 411b) To a solution of (4-Nitro-phenyl)-phosphonic acid diethyl ester (2.31 g, 8.91 mmol) in N,N-dimethylformamide (1 mL) was added thionyl chloride (3.25 mL, 44.6 mmol). The reaction mixture was heated to reflux for 2 hours, cooled to room temperature and concentrated in vacuo. The residue was azeotroped with carbon tetrachloride several times to remove excess thionyl chloride. 4-Nitrophenylphosphonic dichloride was carried on crude to the next reaction. 411c) To a solution of 4-Nitrophenylphosphonic dichloride (2.14 g, 8.91 mmol) in tetrahydrofuran at −78° C. was added vinylmagnesium bromide (2.34 g, 17.8 mmol). The solution was stirred at −78° C. for one hour then quenched by the addition of ammonium chloride solution. The mixture was extracted with dichloromethane. The combined organic layers were dried and concentrated. 4-(Divinyl-phosphinoyl)nitro benzene was isolated as a brown-yellow oil (1.69 g, 85%). MS=224 (MH)+. 411d) A mixture of 4-(Divinyl-phosphinoyl)nitro benzene (1.69 g, 7.56 mmol), water (10 mL), 1.0 M of sodium hydroxide in water (7.56 mL, 7.56 mmol) and tetrahydrofuran (10.0 mL, 123 mmol) was treated with ethylamine hydrochloride (678 mg, 8.32 mmol) then heated at 105° C. for one hour. An additional portion of ethylamine hydrochloride was added and the reaction was heated for an additional 2 hours. The reaction was cooled, poured into saturated sodium bicarbonate solution and extracted with dichloromethane. The aqueous layer was treated with solid sodium chloride and extracted and additional 4 times to isolate all the product. The combined organic layers were dried over magnesium sulfate, filtered and evaporated. The residue was purified via chromatography (40 g silica gel and 0%→10% methanol in dichloromethane). 1-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide was isolated as yellow oil (300 mg, 10%). 1H NMR (400 MHz, (D3C)2SO, δ, ppm): 8.34 (d, J=8.4 Hz, 2H), 8.11 (t, J=18.46, 9.15 Hz, 2H), 2.91-2.75 (m, 4H), 2.51-2.46 (m, 2H), 2.29 (m, 2H), 1.96 (m, 2H), 1.01 (t, J=14.4, 7.5 Hz, 3H). MS=269 (MH)+. 411e) 1-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide (269.80 mg, 1.0058 mmol) dissolved in Ethanol (50 mL) and treated with palladium on carbon 10% (90:10, carbon black:Palladium, 30 mg, 2 mmol), 2.5 M of hydrogen chloride in ethanol (1.21 mL, 3.02 mmol) and 50 PSI of hydrogen gas. The mixture was shaken on a Parr apparatus for 5 hours. The mixture was degassed and backflushed with nitrogen. The mixture was filtered through a plug of diatomaceous earth and washed with ethanol. The filtrate was evaporated. 4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride was isolated (401 mg, 145%). MS=238 (MH)+. 411f) N-[4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)phenyl]-8-[4-(methylsulfonyl)phenyl][1,2,4]triazolo[1,5-a]pyridin-2-amine was prepared from 2-Chloro-8-(4-methanesulfonyl-phenyl)-[1,2,4]triazolo[1,5-a]pyridine (133 mg, 0.434 mmol) and 4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride (131.01 mg, 0.47689 mmol) in a manner analogous to Example 2d. Product isolated as an off-white solid (31.56 mg, 14%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.54 (d, J=8.3 Hz, 1H), 8.23 (d, J=8.0 Hz, 2H), 8.01 (d, J=8.0 Hz, 2H), 7.80-7.67 (m, 5H), 7.08 (t, J=13.6, 7.0 Hz, 1H), 3.13-2.90 (m, 7H), 2.61 (m, 2H), 2.27-2.02 (m, 4H), 1.13 (t, J=13.6, 6.4 Hz, 3H). MS=510 (MH)+.

後処理

  1. temperaturethe reaction was heated for an additional 2 hours
  2. temperatureThe reaction was cooled
  3. extractionextracted with dichloromethane
  4. additionThe aqueous layer was treated with solid sodium chloride
  5. extractionextracted
  6. customadditional 4 times to isolate all the product
  7. dry with materialThe combined organic layers were dried over magnesium sulfate
  8. filtrationfiltered
  9. customevaporated
  10. customThe residue was purified via chromatography (40 g silica gel and 0%→10% methanol in dichloromethane)

出典と根拠

ORDレコード
ord-a4bcd2ce0a9d471c85cb18bcd8dad060
出典データセット
uspto-grants-2013_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08501936B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート