ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ethylene Oxide → Nonylcyclohexanol ethylene oxide

HRID 2305010
印刷

反応式

HRID 2305010 の反応式
[CH2:1]([C:10]1([OH:16])[CH2:15][CH2:14][CH2:13][CH2:12][CH2:11]1)[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH3:9].C1OC1>[OH-].[Na+].C(O)(=O)C>[CH2:10]1[O:16][CH2:15]1.[CH2:1]([C:10]1([OH:16])[CH2:11][CH2:12][CH2:13][CH2:14][CH2:15]1)[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH3:9]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 2

HCID 6354Ethylene Oxide3 回HCID 12496141HCID 12496141、化合物2 回

生成物 1

HCID 18459385Nonylcyclohexanol ethylene oxide収率 461%

試薬・触媒・溶媒 2

HCID 176Acetic Acid触媒HCID 14798Sodium Hydroxide触媒

反応条件

温度
120 °C

実験手順

To a 1,000 ml autoclave equipped with an ethylene oxide inlet tube, 226.5 g (1.0 mole) of nonylcyclohexanol and 0.67 g (6.7 mmoles as sodium hydroxide) of 40% aqueous sodium hydroxide solution were charged. The reaction system was substituted with nitrogen, heated to 120° C., successively evacuated to 50 mmHg, and carry out dehydration for an hour under reduced pressure. After dehydration, the system was returned to atmospheric pressure by feeding nitrogen, and heated to 150° C. While maintaining the temperature, 396.5 g (9.0 moles) of ethylene oxide was fed into the reaction system over 3 hours under gauge pressure of 0.2 to 0.4 MPa to carry out ethylene oxide addition reaction of nonylcyclohexanol. After finishing ethylene oxide charge, the reaction system was further kept at the same temperature for an hour and the catalyst was neutralized after cooling with 0.42 g (7.0 mmoles) of acetic acid to obtain 623.4 g of nonylcyclohexanol ethylene oxide adduct as white solid at room temperature. The white solid was analyzed by liquid chromatography. The solid contained 38.8% by weight of unreacted nonylcyclohexanol, 0.5% by weight of formed one molar ethylene oxide adduct of nonylcyclohexanol, 1.1% by weight of two molar adduct, 1.6% by weight of three molar adduct, 2.3% by weight of four molar adduct, 3.4% by weight of five molar adduct, 4.3% by weight of six molar adduct, 5.2% by weight of seven molar adduct, 6.3% by weight of eight molar adduct, 7.4% by weight of nine molar adduct, 6.6% by weight of ten molar adduct, 5.8% by weight of eleven molar adduct, and 4.7% by weight of twelve molar adduct, 4.1% by weight of thirteen molar adduct, 3.2% by weight of fourteen molar adduct, and 4.7% by weight of fifteen or more molar adduct.

後処理

  1. customTo a 1,000 ml autoclave equipped with an ethylene oxide inlet tube
  2. customsuccessively evacuated to 50 mmHg
  3. customfor an hour
  4. temperatureheated to 150° C
  5. additioncharge
  6. waitthe reaction system was further kept at the same temperature for an hour

出典と根拠

ORDレコード
ord-0bb48633c08f41dba2f66f428cbd8c1a
出典データセット
uspto-grants-2002_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06437194B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート