ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Carbon Dioxide → 1-(3-chloro-2-pyridinyl)-3-(trifluoromethyl)-1H-pyrazole-5-carboxylic acid

HRID 251908
印刷

反応式

HRID 251908 の反応式
[Cl:1][C:2]1[C:3]([N:8]2[CH:12]=[CH:11][C:10]([C:13]([F:16])([F:15])[F:14])=[N:9]2)=[N:4][CH:5]=[CH:6][CH:7]=1.C([N-]C(C)C)(C)C.[Li+].[C:25](=[O:27])=[O:26].[OH-].[Na+]>CCCCCCC.O1CCCC1.C(C1C=CC=CC=1)C.CCCCCC.O.O1CCCC1>[Cl:1][C:2]1[C:3]([N:8]2[C:12]([C:25]([OH:27])=[O:26])=[CH:11][C:10]([C:13]([F:16])([F:14])[F:15])=[N:9]2)=[N:4][CH:5]=[CH:6][CH:7]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

9

反応物 4

HCID 280Carbon DioxideHCID 14798Sodium HydroxideHCID 2724682Lithium diisopropylamideHCID 179762913-chloro-2-(3-(trifluoromethyl)-1H-pyrazol-1-yl)pyridine

生成物 1

HCID 113921841-(3-chloro-2-pyridinyl)-3-(trifluoromethyl)-1H-pyrazole-5-carboxylic acid

試薬・触媒・溶媒 4

HCID 962
Water
溶媒
HCID 8028Tetrahydrofuran溶媒
HCID 8058Hexane溶媒
HCID 22742125Tetrahydrofuran heptane ethylbenzol溶媒

反応条件

温度
-78 °C

実験手順

To a mixture of 15 g of 3-chloro-2-(3-trifluoromethyl-1H-pyrazol-1-yl)pyridine and 150 ml of tetrahydrofuran was added dropwise 39 ml of a 2.0 mol/L lithium diisopropylamide solution in heptane/tetrahydrofuran/ethylbenzene at −78° C., and then stirred at −78° C. for 15 minutes. Carbon dioxide was introduced into the mixture at such a rate that the inner temperature was retained at −60° C. or lower. After the mixture turned yellow, it was further stirred at −78° C. for 10 minutes. After the temperature of the reaction mixture was allowed to rise to room temperature, 200 ml of water and 200 ml of hexane were poured. The aqueous layer was adjusted to pH 10-12 by an addition of a 2N aqueous sodium hydroxide solution and then layers were separated. The organic layer was extracted with a 0.5N aqueous sodium hydroxide solution. The aqueous layers were combined, washed with diethyl ether, adjusted to around pH 3 by an addition of 2N hydrochloric acid, and then extracted with methyl tert-butyl ether three times. The organic layers were combined, washed with an aqueous saturated sodium chloride solution, dried over magnesium sulfate, and concentrated under reduced pressure to obtain 16.08 g of 1-(3-chloro-2-pyridinyl)-3-trifluoromethyl-1H-pyrazole-5-carboxylic acid of the formula:

後処理

  1. customwas retained at −60° C.
  2. stirringit was further stirred at −78° C. for 10 minutes
  3. customto rise to room temperature
  4. customlayers were separated
  5. extractionThe organic layer was extracted with a 0.5N aqueous sodium hydroxide solution
  6. washwashed with diethyl ether
  7. additionadjusted to around pH 3 by an addition of 2N hydrochloric acid
  8. extractionextracted with methyl tert-butyl ether three times
  9. washwashed with an aqueous saturated sodium chloride solution
  10. dry with materialdried over magnesium sulfate
  11. concentrationconcentrated under reduced pressure

出典と根拠

ORDレコード
ord-2c107bb83a3b41308a4f24e49502be2d
出典データセット
uspto-grants-2011_01
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07867949B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート