Hydrochloric Acid → HCID 54346943, 화합물
반응식
[BH4-].[Na+].[Cl:3][C:4]1[C:5]([F:16])=[C:6]([C:10]([F:15])=[C:11]([Cl:14])[C:12]=1[F:13])[C:7](F)=[O:8].O.Cl>O1CCOCC1>[Cl:3][C:4]1[C:5]([F:16])=[C:6]([C:10]([F:15])=[C:11]([Cl:14])[C:12]=1[F:13])[CH2:7][OH:8]참가 물질
반응 조건
- 온도
- 20 °C
실험 절차
400 ml of dry dioxane and 55 g of sodium borohydride are initially introduced into a 2 l three-necked flask with a stirrer, reflux condenser and dropping funnel at 20° C., and 247 g of 3,5-dichloro-2,4,6-trifluorobenzoyl fluoride, dissolved in 250 ml of dry dioxane, are then added dropwise at this temperature. When the addition has ended, the mixture is stirred at 20° C. for a further 2 hours and then warmed to the reflux temperature for 1 hour. The solution is cooled to room temperature, a total of 50 ml of water are then added dropwise and the mixture is subsequently rendered acid with dilute hydrochloric acid. The reaction mixture is extracted three times with methylene chloride and, after drying the organic phase over sodium sulphate, the solvent is distilled off. 196.5 g (85% of the theoretical yield) of 3,5-dichloro-2,4,6-trifluorobenzyl alcohol of boiling point 134° to 135° C./20 mbars and melting point 67° to 68° C. are obtained from the residue by further distillation.
후처리
- temperaturereflux condenser
- customat 20° C.
- additionare then added dropwise at this temperature
- additionWhen the addition
- temperaturewarmed to the reflux temperature for 1 hour
- temperatureThe solution is cooled to room temperature
- extractionThe reaction mixture is extracted three times with methylene chloride
- dry with materialafter drying the organic phase over sodium sulphate
- distillationthe solvent is distilled off
출처 및 근거
- ORD 기록
- ord-666aa7aec3a74cdba2fbc0354c04de4b
- 출처 데이터셋
- uspto-grants-1982_05
- 특허 번호
- US04330366
반응 노트
불러오는 중…