홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Stannous Chloride → 4-Hydrazinothiazole-5-carboxylic acid methyl ester

HRID 1157934
노트
인쇄 미리보기

반응식

HRID 1157934 반응식
[N:1]([O-])=O.[Na+].[CH3:5][O:6][C:7]([C:9]1[S:13][CH:12]=[N:11][C:10]=1[NH2:14])=[O:8].[Sn](Cl)Cl>Cl>[CH3:5][O:6][C:7]([C:9]1[S:13][CH:12]=[N:11][C:10]=1[NH:14][NH2:1])=[O:8]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24479Stannous ChlorideHCID 15832487Methyl 4-amino-1,3-thiazole-5-carboxylateHCID 23668193Sodium Nitrite

생성물 1

HCID 552812984-Hydrazinothiazole-5-carboxylic acid methyl ester수율 69.2%

시약·촉매·용매 1

HCID 313Hydrochloric Acid용매2회

반응 조건

온도
0 °C

실험 절차

An aqueous solution (10 ml) of sodium nitrite (7.32 g) was added dropwise to a concentrated hydrochloric acid solution (90 ml) of 4-aminothiazole-5-carboxylic acid methyl ester (15.3 g) at 0-10° C. The mixture was then stirred at 0° C. for 30 minutes. To this mixture there was added dropwise a concentrated hydrochloric acid solution (100 ml) containing tin(II) chloride (73.2 g) at 0-10° C., and the mixture was stirred at the same temperature for 2 hours. The mixture was filtered and the filtrate was carefully added to a suspension of potassium carbonate and Celite in ethyl acetate (3 l) while stirring, with regular addition of potassium carbonate to prevent solution acidity. After adding the filtered substance to this ethyl acetate suspension, it was rendered basic with a 5N aqueous sodium hydroxide solution. The mixture was allowed to stand, and then most of the supernatant (organic layer A) was separated off. The remaining suspension was filtered through Celite and the filtrate was separated into organic layer B and aqueous layer A. Ethyl acetate (500 ml) and anhydrous magnesium sulfate were added to the filtered substance, and the mixture was stirred and then filtered. Aqueous layer A was re-extracted with the resulting filtrate. Washing of the filtered substance and re-extraction of aqueous layer A were repeated 4 times in the same manner. Organic layer A and organic layer B were combined with the obtained organic layer, and the mixture was dried over anhydrous magnesium sulfate. The desiccant was filtered out and the filtrate was concentrated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate-methanol system) to obtain the target compound (11.6 g) as an off-white solid.

후처리

  1. stirringthe mixture was stirred at the same temperature for 2 hours
  2. filtrationThe mixture was filtered
  3. additionthe filtrate was carefully added to a suspension of potassium carbonate and Celite in ethyl acetate (3 l)
  4. stirringwhile stirring, with regular addition of potassium carbonate
  5. additionAfter adding the filtered substance to this ethyl acetate suspension, it
  6. custommost of the supernatant (organic layer A) was separated off
  7. filtrationThe remaining suspension was filtered through Celite
  8. customthe filtrate was separated into organic layer B and aqueous layer A
  9. additionEthyl acetate (500 ml) and anhydrous magnesium sulfate were added to the filtered substance
  10. stirringthe mixture was stirred
  11. filtrationfiltered
  12. extractionAqueous layer A was re-extracted with the resulting filtrate
  13. washWashing of the filtered substance and re-extraction of aqueous layer A
  14. dry with materialthe mixture was dried over anhydrous magnesium sulfate
  15. filtrationThe desiccant was filtered out
  16. concentrationthe filtrate was concentrated under reduced pressure
  17. customThe residue was purified by silica gel column chromatography (ethyl acetate-methanol system)

출처 및 근거

ORD 기록
ord-c668a66a6c8f456692f1b908da859123
출처 데이터셋
uspto-grants-2010_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07807690B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트