홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 5-Chloro-3-fluoro-2-hydroxybenzaldehyde

HRID 1191607
노트
인쇄 미리보기

반응식

HRID 1191607 반응식
Cl[C:2]1[CH:7]=[CH:6][C:5]([O:8]C(=O)NC(C)C)=[C:4]([F:15])[CH:3]=1.N[CH2:17]CCCN.[Li]CCCC.[OH-:27].[Na+].[ClH:29]>C(OCC)C.C(O)C.CN(C=O)C>[Cl:29][C:2]1[CH:3]=[C:4]([F:15])[C:5]([OH:8])=[C:6]([CH:7]=1)[CH:17]=[O:27]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 5

HCID 313Hydrochloric AcidHCID 1045Putrescine2회HCID 14798Sodium HydroxideHCID 68736541Isopropylcarbamic acid 4-chloro-2-fluorophenyl esterHCID 178418339Butyllithium

생성물 1

HCID 716954235-Chloro-3-fluoro-2-hydroxybenzaldehyde

시약·촉매·용매 3

HCID 702
Ethanol
용매
HCID 3283Diethyl Ether용매
HCID 6228Dimethylformamide용매

반응 조건

온도
-70 °C

실험 절차

To 5 g (34 mmol) 4-Chloro-2-fluorophenol and 416 mg (3.41 mmol) 4-dimethylaminopyridine in 18 ml THF are added 3.7 ml (37.5 mmol) isopropyl isocyanate and the mixture is heated for 20 hours at 60° C. After cooling down to room temperature 2 M HCl is added and the aqueous phase is extracted with diethyl ether. The combined organic phases are washed with brine, dried over sodium sulfate and evaporated to yield 7.2 g isopropylcarbamic acid 4-chloro-2-fluorophenyl ester as the crude product. To 7.2 g (31 mmol) isopropylcarbamic acid 4-chloro-2-fluorophenyl ester and 5.1 ml tetramethylene diamine in 300 ml diethyl ether are added 5.9 ml (32.5 mmol) (trimethylsilyl)(trifluoromethan)sulfonate at room temperature. After 30 minutes the mixture is cooled to −70° C., 10.2 ml tetramethylene diamine and 27 ml of a 2.5 M n-BuLi solution are added successively. After one hour at −70° 24 ml DMF in are added at −70° C. and the mixture is stirred another hour at −70° C. 130 ml ethanol and 36 ml of a 2 M aqueous NaOH are added and the reaction is warmed to ambient temperature over 18 hours. The reaction mixture is set acidic by addition of 100 ml 2 M aqueous HCl and partitioned between diethyl ether and water. The aqueous phase is extracted with diethyl ether, the combined organic phases are washed with brine, dried over sodium sulphate and evaporated. The crude product is purified by chromatography on silica gel to yield 1.1 g 5-chloro-3-fluoro-2-hydroxybenzaldehyde. 1.1 g (6.1 mmol) 5-chloro-3-fluoro-2-hydroxybenzaldehyde and 1.56 g (11.3 mmol) potassium carbonate are stirred vigorously in 11 ml DMF while 0.7 ml methyliodide are added. Stirring is continued for 18 hours and water is added. The aqueous phase is extracted with diethyl ether, the combined organic phases are dried over sodium sulfate and evaporated. The crude product is purified by chromatography on silica gel (ethyl acetate in hexane 0 to 10%) to yield 570 mg 5-chloro-3-fluoro-2-methoxybenzaldehyde. 1H-NMR (CDCl3); δ=4.10 (d, 3H), 7.35 (dd, 1H), 7.59 (m, 1H), 10.35 (s, 1H).

후처리

  1. temperaturethe reaction is warmed to ambient temperature over 18 hours
  2. custompartitioned between diethyl ether and water
  3. extractionThe aqueous phase is extracted with diethyl ether
  4. washthe combined organic phases are washed with brine
  5. dry with materialdried over sodium sulphate
  6. customevaporated
  7. customThe crude product is purified by chromatography on silica gel

출처 및 근거

ORD 기록
ord-eaddb097d2e84a3b941bf1cd49962344
출처 데이터셋
uspto-grants-2014_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08680117B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트