홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 4-Methoxymethyl-2,3,5,6-tetrafluorobenzyl alcohol

HRID 1250790
인쇄

반응식

HRID 1250790 반응식
[F:1][C:2]1[C:7]([F:8])=[C:6]([CH2:9][OH:10])[C:5]([F:11])=[C:4]([F:12])[C:3]=1[CH2:13][OH:14].O.[OH-].[Na+].S(OC)(O[CH3:22])(=O)=O>C1(C)C=CC=CC=1>[CH3:22][O:14][CH2:13][C:3]1[C:2]([F:1])=[C:7]([F:8])[C:6]([CH2:9][OH:10])=[C:5]([F:11])[C:4]=1[F:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 6497Dimethyl SulfateHCID 14798Sodium HydroxideHCID 40988352,3,5,6-Tetrafluoro-1,4-benzenedimethanol

생성물 1

HCID 111721164-Methoxymethyl-2,3,5,6-tetrafluorobenzyl alcohol수율 100.8%

시약·촉매·용매 1

HCID 1140Toluene
용매

반응 조건

온도
65 °C

실험 절차

Into a reaction vessel that was charged nitrogen, 5.00 g (23.1 mmol) of 2,3,5,6-tetrafluoro-1,4-benzenedimethanol, 15.00 g of water and 6.85 g (46.3 mmol) of 27% aqueous sodium hydroxide solution were charged subsequently, and heated to 65° C. with stirring. The starting compound was completely dissolved to be clear solution. Then, the reaction mixture was allowed to cool to room temperature with stirring. At this time, some precipitate was observed. To the reaction mixture, 20.0 g of toluene was added and then 4.33 g (32.6 mmol) of dimethyl sulfate was added dropwise over 7.5 hours at room temperature. After the addition, the pH of the aqueous layer became 13.5. The layers of the reaction mixture were separated, and the pH of the aqueous layer was adjusted to about 3 by adding 10% sulfric acid. The aqueous layer was extracted with 30 ml of ethyl acetate, and the combined organic layers were washed- with 30 ml of water, concentrated, and dried under a reduced pressure to give 5.22 g of crude 4-methoxymethyl-2,3,5,6-tetrafluorobenzenemethanol. The crude 4-methoxymethyl-2,3,5,6-tetrafluorobenzenemethanol was subjected to content analysis by GC internal standard method (Analytical method 1 given later). GC area percentage of the crude product: 85% of the objective compound, 1% of the starting compound and 13% of the by-product compound Content analysis by GC internal standard method: 85% of the objective compound and 86% of the yield of pure compound

후처리

  1. additionwere charged subsequently
  2. dissolutionThe starting compound was completely dissolved
  3. temperatureto cool to room temperature
  4. stirringwith stirring
  5. additionAfter the addition
  6. customThe layers of the reaction mixture were separated
  7. additionby adding 10% sulfric acid
  8. extractionThe aqueous layer was extracted with 30 ml of ethyl acetate
  9. concentrationconcentrated
  10. customdried under a reduced pressure

출처 및 근거

ORD 기록
ord-3daeef347bd54ac28ac286c279770791
출처 데이터셋
uspto-grants-2002_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06339176B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트