홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Solketal → 2,2-Dimethyl-1,3-dioxolane-4-carboxylic acid

HRID 1252746
인쇄

반응식

HRID 1252746 반응식
[CH3:1][C:2]1([CH3:9])[O:6][CH:5]([CH2:7][OH:8])[CH2:4][O:3]1.[OH-:10].[Na+]>O.[Ni].[Pd]>[CH3:1][C:2]1([CH3:9])[O:6][CH:5]([C:7]([OH:10])=[O:8])[CH2:4][O:3]1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 7528SolketalHCID 14798Sodium Hydroxide

생성물 1

HCID 109096992,2-Dimethyl-1,3-dioxolane-4-carboxylic acid수율 86%

시약·촉매·용매 3

HCID 935Nickel촉매HCID 23938Palladium촉매HCID 962Water용매

실험 절차

40.7 g (308 mmoles) of a glycerin ketal mixture containing 97.5% by weight of 2,2-dimethyl-4-hydroxymethyl-1,3-dioxolane and 12.2 g (305 mmoles) of sodium hydroxide were dissolved in 366 ml of water. After transferring the mixture to a nickel shaker-type autoclave, the solution was heated to about 80° C. under a pressure of 25 bar in the presence of 4 g of an activated carbon containing 5% by weight of palladium with agitation for about 2 hours. The pressure in the autoclave rose briefly to 30 bar, subsequently fell back to 25 bar and, after another hour, increased to 63 bar. After 2 hours, the pressure remained constant at 53 bar. The autoclave was then vented. The pH of the solution was adjusted, the water in the solution was distilled off, and the remaining residue was hot extracted in the same manner as described in Example 2. The 2,2-dimethyl-1,3-dioxolane-4-carboxylic acid, Na salt was isolated in a yield of 86% of the theoretical. The melting point of the salt was 243°-246° C.

후처리

  1. waitsubsequently fell back to 25 bar and, after another hour
  2. temperatureincreased to 63 bar
  3. distillationthe water in the solution was distilled off
  4. extractionthe remaining residue was hot extracted in the same manner

출처 및 근거

ORD 기록
ord-3d1f8e9f97514d808b8cab332a21cb2f
출처 데이터셋
uspto-grants-1988_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04745200

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트