Hydrochloric Acid → 5-Formylfuran-2-boronic acid

HRID 1272569

반응식

HRID 1272569 반응식
ClC1CCCCC1.C([O:10][CH:11](OCC)[C:12]1[O:16][CH:15]=[CH:14][CH:13]=1)C.[Li].[B:21](OC)([O:24]C)[O:22]C.Cl>C1COCC1.C1CCCCC1.O>[CH:11]([C:12]1[O:16][C:15]([B:21]([OH:24])[OH:22])=[CH:14][CH:13]=1)=[O:10]

참가 물질

9

반응 조건

온도
-65 °C

실험 절차

A mixture of 20.88 g of chlorocyclohexane (0.176 mol) and 27.2 g of furfural diethyl acetal (0.16 mol) is added dropwise to a suspension of 2.35 g of lithium granules (0.34 mol) in 300 g of THF at −65° C., with an addition time of 2 hours being selected. After a conversion of the chlorocyclohexane of >97% determined by GC (total of 10 h), 18.3 g of trimethyl borate (0.176 mol) are added dropwise at the same temperature over a period of 30 minutes. After stirring for another 30 minutes at −65° C., the reaction mixture is poured into 120 g of water, the pH is adjusted to 6.3 by means of 37% HCl, and THF and cyclohexane are distilled off at a maximum of 35° C. under reduced pressure. The pH is subsequently adjusted to 1.5, the mixture is stirred until all the product has precipitated and the product is filtered off. After washing with a little cold water and a little cold acetone and drying, 17.2 g of 5-formyl-2-furanboronic acid (0.123 mol, 77%) are obtained in the form of a fine beige powders, HPLC purity >99% a/a.

후처리

  1. additionare added dropwise at the same temperature over a period of 30 minutes
  2. distillationare distilled off at a maximum of 35° C. under reduced pressure
  3. stirringthe mixture is stirred until all the product
  4. customhas precipitated
  5. filtrationthe product is filtered off
  6. washAfter washing with a little cold water
  7. dry with materiala little cold acetone and drying

출처 및 근거

ORD 기록
ord-f5a5e39256e84d8ebd11ba0120058d4c
출처 데이터셋
uspto-grants-2007_04
특허 번호
US07208614B2

연결된 노트

불러오는 중…