홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 7-chloro-2-methyl-4H-3-thia-4,9-diaza-benzo[f]azulen-10-ylamine hydrochloride

HRID 131385
인쇄

반응식

HRID 131385 반응식
[Cl:1][C:2]1[CH:7]=[CH:6][C:5]([NH:8][C:9]2[S:10][C:11]([CH3:16])=[CH:12][C:13]=2[C:14]#[N:15])=[C:4]([N+:17]([O-])=O)[CH:3]=1.Cl.[Sn](Cl)Cl.[Sn]>CCO>[ClH:1].[Cl:1][C:2]1[CH:7]=[CH:6][C:5]2[NH:8][C:9]3[S:10][C:11]([CH3:16])=[CH:12][C:13]=3[C:14]([NH2:15])=[N:17][C:4]=2[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 24479Stannous ChlorideHCID 5352426Tin atomHCID 586259752-(4-Chloro-2-nitro-phenylamino)-5-methyl-thiophene-3-carbonitrile

생성물 1

HCID 1363885727-chloro-2-methyl-4H-3-thia-4,9-diaza-benzo[f]azulen-10-ylamine hydrochloride

시약·촉매·용매 1

HCID 702
Ethanol
용매

반응 조건

온도
85 °C

실험 절차

Stir in a 3 neck 12 L round bottom flask 2-(4-chloro-2-nitro-phenylamino)-5-methyl-thiophene-3-carbonitrile (204.9 g, 0.6976 mol, 1 equiv), 3 A EtOH (2 L), and 6N HCl (2 L) for 10 min. Charge to the slurry in one portion, tin (II) chloride (404.1 g, 2.131 mol, 3.06 equiv) and heat to gentle reflux at 85° C. for 3 hours. HPLC at 3 hours shows <0.4% starting material. Allow mixture to cool and stir overnight. During the workup there is a possibility of tin salts precipitating with the product, did not cool as in lab trial, Workup includes: filtering reaction mixture, rinsing with ambient 1:1 3A EtOH/6N HCl (2×500 mL), rinsing with DI water (2×50 mL), drying in vacuum oven at 60° C. for 2 days. Wt.=231.5 g, and anaylsis. Discard some very small amount of precipitate which appears in the filtrate. Tin Removal in Hot 1 N HCl involves placing 231.5 g of the yellow crude product in 22 L flask, adding 1 N HCl (11.6 L), heating to 95° C. and holding at that temperature for 1 hour, shuting off heat and allowing to cool with heating mantle in place overnight. The next morning the temperature is 29° C. Remove mantle and replace with water bath and cool to 22° C. and filter. Rinse flask and add to cake with 1 N HCl (4 L) and follow by DI water (4 L). Pull air through the cake for 10 minutes, place in vacuum oven at 60° C. for 40 hours (Note: Only 1 gram of weight was lost over the final 16 hours of drying time.) Dry weight of title compound is 200.4 g (95.7%). Perform tin analysis. NMR is consistent with product. HPLC showed 98.5%.

후처리

  1. temperatureheat
  2. temperatureAllow mixture to cool
  3. customprecipitating with the product
  4. temperaturedid not cool as in lab trial, Workup
  5. filtrationfiltering
  6. customreaction mixture
  7. washrinsing with ambient 1:1 3A EtOH/6N HCl (2×500 mL)
  8. washrinsing with DI water (2×50 mL)
  9. customdrying in vacuum oven at 60° C. for 2 days
  10. customTin Removal in Hot 1 N HCl
  11. additionadding 1 N HCl (11.6 L)
  12. temperatureheating to 95° C.
  13. waitholding at that temperature for 1 hour
  14. temperatureheat
  15. temperatureto cool
  16. temperaturewith heating mantle in place overnight
  17. customis 29° C
  18. customRemove mantle
  19. customreplace with water bath
  20. temperaturecool to 22° C.
  21. filtrationfilter
  22. washRinse flask
  23. additionadd to cake with 1 N HCl (4 L)
  24. customfor 10 minutes
  25. waitplace in vacuum oven at 60° C. for 40 hours (Note
  26. custom16 hours
  27. customof drying time
  28. dry with material) Dry weight of title compound

출처 및 근거

ORD 기록
ord-cb39b353b3184f3fb84208efedaa4253
출처 데이터셋
uspto-grants-2008_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07384934B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트