C(O[C:4]([C:6]1[S:14][C:9]2=[CH:10]N=C[CH:13]=[C:8]2[C:7]=1[NH:15][C:16]1[CH:21]=[CH:20][C:19]([I:22])=[CH:18][C:17]=1[F:23])=[O:5])C.[OH-].[Na+].[CH3:26][C:27]1([CH3:35])[O:31][C@@H:30]([CH2:32][O:33][NH2:34])[CH2:29][O:28]1.C[CH2:37][N:38]=C=NCCCN(C)C.C1C=CC2N(O)N=NC=2C=1.CCN(C(C)C)C(C)C>C1COCC1.C(O)C>[CH3:26][C:27]1([CH3:35])[O:31][C@@H:30]([CH2:32][O:33][NH:34][C:4]([C:6]2[S:14][C:9]3[CH:10]=[CH:37][N:38]=[CH:13][C:8]=3[C:7]=2[NH:15][C:16]2[CH:21]=[CH:20][C:19]([I:22])=[CH:18][C:17]=2[F:23])=[O:5])[CH2:29][O:28]1A mixture of 3-(2-fluoro-4-iodo-phenylamino)-thieno[2,3-c]pyridine-2-carboxylic acid ethyl ester (50 mg, 0.11 mmol), 1N aqueous NaOH solution (0.12 ml, 0.12 mmol) and ethanol (2 ml) was heated at 65° C. for 45 minutes. The reaction mixture was concentrated then azeotroped with toluene (2×2 ml) to give a solid residue. The solid residue was dissolved in anhydrous THF (2 ml) and O—((R)-2,2-dimethyl-[1,3]dioxolan-4-ylmethyl)hydroxylamine (27 mg, 0.23 mmol), EDCI (27 mg, 0.14 mmol), HOBt (21 mg, 0.16 mmol) and DIPEA (59 μl, 0.34 mmol) were added. After stirring for 19 hours the solvent was evaporated and the residue partitioned between ethyl acetate (30 ml) and water (20 ml). The organic layer was dried over sodium sulphate, filtered and evaporated to give a yellow oil. The oil was purified by flash chromatography (Si-SPE, pentane:ethyl acetate, gradient 80:20 to 50:50) to afford the title compound as a yellow solid (18 mg, 30%). LCMS (method B): RT=3.09 min, M+H+=544.
불러오는 중…