홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → Cyclopentanone, 2-(1-hydroxypentyl)-

HRID 1373488
인쇄

반응식

HRID 1373488 반응식
[CH:1](=[O:6])[CH2:2][CH2:3][CH2:4][CH3:5].[OH-].[K+].[C:9]1(=[O:14])[CH2:13][CH2:12][CH2:11][CH2:10]1.S(=O)(=O)(O)O.C[Si].C(OCCOCCO)C>[OH-].[Na+].C(=C1CCCC1=O)CCCC.O>[OH:6][CH:1]([CH:10]1[CH2:11][CH2:12][CH2:13][C:9]1=[O:14])[CH2:2][CH2:3][CH2:4][CH3:5]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

10

반응물 6

HCID 1118Sulfuric AcidHCID 8063Pentanal2회HCID 8146Diethylene Glycol Monoethyl EtherHCID 8452CyclopentanoneHCID 14797Potassium HydroxideHCID 6328649Methylsilicon

생성물 1

HCID 162060Cyclopentanone, 2-(1-hydroxypentyl)-
수율 87.4%

시약·촉매·용매 3

HCID 14798Sodium Hydroxide촉매HCID 860002-Pentylidenecyclopentanone촉매HCID 962Water용매

반응 조건

온도
0 °C

실험 절차

Valeraldehyde having an acid value of 3.4 mg-KOH/g was used as the starting material. 117.6 g (1.4 mol) cyclopentanone, 125.2 g water and 2.8 g (0.033 mol) 48% NaOH were introduced into a 500-mL four-necked flask, then the mixture was cooled to 0° C. under stirring, and 72.4 g (0.84 mol) valeraldehyde was added dropwise at the same temperature over 4 hours. Thereafter, the mixture was stirred at the same temperature for 4 hours. After the reaction was finished, the mixture was neutralized with 17.4 g of 10% sulfuric acid and the organic layer was analyzed by gas chromatography. In this analysis, a methyl silicon column was used and diethylene glycol monoethyl ether (carbitol) was added as the standard. The result indicated that the reaction mixture contained 124.4 g (0.73 mol) 2-(1-hydroxy-n-pentyl)cyclopentanone (yield 87.4%) and 2.5 g (0.016 mol) 2-pentylidene cyclopentanone.

후처리

  1. stirringThereafter, the mixture was stirred at the same temperature for 4 hours

출처 및 근거

ORD 기록
ord-b3700ef654d04a07ab1fd597d7c92809
출처 데이터셋
uspto-grants-2007_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07161041B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트