홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → alpha-Acetamido-6-chloro-3-indoleacrylic acid methylester

HRID 1390842
인쇄

반응식

HRID 1390842 반응식
Cl.[CH3:2][O:3][C:4](=[O:18])[C:5]([NH2:17])=[CH:6][C:7]1[C:15]2[C:10](=[CH:11][C:12]([Cl:16])=[CH:13][CH:14]=2)[NH:9][CH:8]=1.N1C=CC=CC=1.Cl.[C:26](OC(=O)C)(=[O:28])[CH3:27]>>[CH3:2][O:3][C:4](=[O:18])[C:5]([NH:17][C:26](=[O:28])[CH3:27])=[CH:6][C:7]1[C:15]2[C:10](=[CH:11][C:12]([Cl:16])=[CH:13][CH:14]=2)[NH:9][CH:8]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 313Hydrochloric AcidHCID 1049PyridineHCID 7918Acetic AnhydrideHCID 70550909Alpha-amino-6-chloro-3-indoleacrylic acid methylester hydrochloride

생성물 1

HCID 54310075alpha-Acetamido-6-chloro-3-indoleacrylic acid methylester수율 90%

실험 절차

A 2-l. three-necked flask, equipped with a thermometer, a mechancal stirrer and a dropping funnel was charged with 101.2 g (ca. 0.35 moles) of crude pulverized alpha-amino-6-chloro-3-indoleacrylic acid methylester hydrochloride and 400 ml of acetic anhydride. The slurry was cooled to 15°. Then 32 g (0.40 moles) of pyridine was added with stirring over a 5 minute period, while the temperature was kept between 15° and 22°; after complete addition, virtually all starting hydrochloride went into solution. Stirring at 22° was continued for 20 minutes during which the product began to crystallize out. 200 ml of water was then added over 40 minutes, keeping the temperature at ca. 25°. Stirring at this temperature was continued for 11/2 hours. 900 ml of water was then added over 5 minutes and the slurry stirred at room temperature for an additional hour. The precipitate was collected by suction filtration, washed with 750 ml of water and dried at 60° (constant weight) to afford 92.9 g (90%) of product, as yellow crystals, m.p. 202-203°.

후처리

  1. customthree-necked flask, equipped with a thermometer, a mechancal stirrer and a dropping funnel
  2. additionwas charged with 101.2 g (ca. 0.35 moles) of crude
  3. temperatureThe slurry was cooled to 15°
  4. customwas kept between 15° and 22°
  5. additionafter complete addition
  6. stirringStirring at 22°
  7. waitwas continued for 20 minutes during which
  8. customto crystallize out
  9. addition200 ml of water was then added over 40 minutes
  10. customat ca. 25°
  11. stirringStirring at this temperature
  12. custom2 hours
  13. addition900 ml of water was then added over 5 minutes
  14. stirringthe slurry stirred at room temperature for an additional hour
  15. filtrationThe precipitate was collected by suction filtration
  16. washwashed with 750 ml of water
  17. customdried at 60° (constant weight)

출처 및 근거

ORD 기록
ord-8b63db0b9b89405dac53f3bfb6b6825c
출처 데이터셋
uspto-grants-1979_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04140697

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트