홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

M-Cresol → 4,4'-Bis(3-methylphenoxymethyl)-1,1'-biphenyl

HRID 1468547
인쇄

반응식

HRID 1468547 반응식
N#N.[OH-:3].[K+].[CH:5]1[C:10]([OH:11])=[CH:9][CH:8]=[CH:7][C:6]=1[CH3:12].Cl[CH2:14][C:15]1[CH:20]=[CH:19][C:18]([C:21]2[CH:26]=[CH:25][C:24]([CH2:27]Cl)=[CH:23][CH:22]=2)=[CH:17][CH:16]=1>CS(C)=O>[CH3:12][C:6]1[CH:5]=[C:10]([CH:9]=[CH:8][CH:7]=1)[O:11][CH2:14][C:15]1[CH:20]=[CH:19][C:18]([C:21]2[CH:26]=[CH:25][C:24]([CH2:27][O:3][C:10]3[CH:9]=[CH:8][CH:7]=[C:6]([CH3:12])[CH:5]=3)=[CH:23][CH:22]=2)=[CH:17][CH:16]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 342M-CresolHCID 947NitrogenHCID 14797Potassium Hydroxide2회HCID 742754,4'-Bis(chloromethyl)-1,1'-biphenyl

생성물 1

HCID 671272694,4'-Bis(3-methylphenoxymethyl)-1,1'-biphenyl수율 91.4%

시약·촉매·용매 1

HCID 679
Dimethyl Sulfoxide
용매

실험 절차

A 250 mL 3-neck flask equipped with a heating mantle, mechanical stirrer and N2 blanket was charged with KOH pellets (7.26 g, 0.11 mol based on 85% actives), DMSO (100 mL) and m-cresol (12.0 g, 0.11 mol). With stirring, the mixture was warmed to 100 C for 2 hours during which time the KOH pellets dissolved and the solution became a dark brown. To the solution was added solid 4,4′-bischloromethyl-1,1′biphenyl (12.6 g, 0.05 mol) over a period of 5 minutes. During the addition, the heating mantle was removed to facilitate air cooling and the rate of addition limited such that the reaction exotherm did not cause the internal temperature to exceed 115 C. The reaction mixture quickly became a thick slurry. After holding the reaction mass at 100 C for 4 additional hours, the mixture was stirred at room temperature overnight during which time the slurry became more fluid. The reaction mass was poured into a beaker containing 300 mL rapidly stirred water resulting in the immediate precipitation of the product, and a dissolution of the KCl byproduct. The solid product was collected via vacuum filtration and washed well with water. The light tan paste was dried in a forced air oven at 70 C for several hours providing 19.2 g (97.5%) crude product. GPC analysis of the product using a UV detector demonstrated very high purity (>99%). If desired, the product may be re-crystallized from toluene (250 mL) giving 18.0 g (91.4% yield) fine crystals. 1H and 13C-NMR, IR, GC/MS all confirm the identity and purity of the product. MP=151 C.

후처리

  1. dissolutiondissolved
  2. additionDuring the addition
  3. customthe heating mantle was removed
  4. temperaturecooling
  5. additionthe rate of addition
  6. stirringthe mixture was stirred at room temperature overnight during which time the slurry
  7. additionThe reaction mass was poured into a beaker
  8. additioncontaining 300 mL rapidly stirred water resulting
  9. customin the immediate precipitation of the product
  10. dissolutiona dissolution of the KCl byproduct
  11. filtrationThe solid product was collected via vacuum filtration
  12. washwashed well with water
  13. customThe light tan paste was dried in a forced air oven at 70 C for several hours
  14. customproviding 19.2 g (97.5%) crude product
  15. customthe product may be re-crystallized from toluene (250 mL)

출처 및 근거

ORD 기록
ord-a1feec1738d74111a507a25abf873468
출처 데이터셋
uspto-grants-2015_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09005314B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트