홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4-(3',4'-Difluoro-4-methylbiphenyl-3-yl)-2,2,6,6-tetramethylpyran-3,5-dione

HRID 1470849
인쇄

반응식

HRID 1470849 반응식
Cl[C:2]1[CH:3]=[CH:4][C:5]([CH3:20])=[C:6]([CH:8]2[C:13](=[O:14])[C:12]([CH3:16])([CH3:15])[O:11][C:10]([CH3:18])([CH3:17])[C:9]2=[O:19])[CH:7]=1.[F:21][C:22]1[CH:23]=[C:24](B(O)O)[CH:25]=[CH:26][C:27]=1[F:28].P([O-])([O-])([O-])=O.[K+].[K+].[K+].Cl>C(OCC)(=O)C.CN(C)C=O.C([O-])(=O)C.[Pd+2].C([O-])(=O)C>[F:21][C:22]1[CH:23]=[C:24]([C:2]2[CH:3]=[CH:4][C:5]([CH3:20])=[C:6]([CH:8]3[C:9](=[O:19])[C:10]([CH3:18])([CH3:17])[O:11][C:12]([CH3:15])([CH3:16])[C:13]3=[O:14])[CH:7]=2)[CH:25]=[CH:26][C:27]=1[F:28]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 313Hydrochloric AcidHCID 62657Potassium Phosphate, Tribasic2회HCID 27343373,4-Difluorobenzeneboronic acid2회HCID 684861614-(5-Chloro-2-methylphenyl)-2,2,6,6-tetramethylpyran-3,5-dione

생성물 1

HCID 684883944-(3',4'-Difluoro-4-methylbiphenyl-3-yl)-2,2,6,6-tetramethylpyran-3,5-dione수율 75%

시약·촉매·용매 3

HCID 167845palladium(II) acetate촉매HCID 6228Dimethylformamide용매HCID 8857Ethyl Acetate용매

반응 조건

온도
160 °C

실험 절차

To a microwave vial is added 4-(5-chloro-2-methylphenyl)-2,2,6,6-tetramethyl-pyran-3,5-dione (0.20 g, 0.68 mmol), 3,4-difluoro-phenylboronic acid (0.107 g, 0.68 mmol), potassium phosphate (0.722 g, 3.40 mmol), palladium(II) acetate (1.6 mg, 0.0068 mmol) and sodium S-phos-3′-sulphonate (7.0 mg, 0.0136 mmol). Distilled, degassed water (0.75 ml) is next added (washing-down any solids from the slides of the vial), followed by stirring for 5 minutes and flushing with argon. This mixture is then heated at 160° C. under microwave irradiation for 15 minutes, followed by the addition of extra 3,4-difluorophenylboronic acid (0.107 g, 0.68 mmol) and potassium phosphate (0.144 g, 0.68 mmol), then further heating at 160° C. under microwave irradiation for 15 minutes. After cooling to room temperature the reaction mixture is diluted with ethyl acetate (3 ml) and acidified to pH2 with dilute aqueous hydrochloric acid. The organic phase is separated and the aqueous phase is further extracted with ethyl acetate (3×3 ml). All organics are then combined, filtered through a silica plug and evaporated to give a crude product which is dissolved in N,N-dimethylformamide (2.5 ml) and purified by preparative reverse phase HPLC to afford 4-(3′,4′-difluoro-4-methylbiphenyl-3-yl)-2,2,6,6-tetramethylpyran-3,5-dione (0.190 g) as a white solid.

후처리

  1. distillationDistilled
  2. customdegassed water (0.75 ml)
  3. additionis next added (
  4. washwashing-down any solids from the slides of the vial),
  5. customflushing with argon
  6. temperaturefurther heating at 160° C. under microwave irradiation for 15 minutes
  7. temperatureAfter cooling to room temperature the reaction mixture
  8. customThe organic phase is separated
  9. extractionthe aqueous phase is further extracted with ethyl acetate (3×3 ml)
  10. filtrationfiltered through a silica plug
  11. customevaporated
  12. customto give a crude product which
  13. custompurified by preparative reverse phase HPLC

출처 및 근거

ORD 기록
ord-24ecf056a3b0470282e0362ba32c7359
출처 데이터셋
uspto-grants-2015_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09006429B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트