홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Diethylene Glycol → 1-(2-(2,2,6,6-Tetramethylphosphinan-1-yl)phenyl)-1H-pyrrole

HRID 1499349
노트
인쇄 미리보기

반응식

HRID 1499349 반응식
[N:1]1([C:6]2[CH:11]=[CH:10][CH:9]=[CH:8][C:7]=2[P:12]2[C:17]([CH3:19])([CH3:18])[CH2:16][C:15](=O)[CH2:14][C:13]2([CH3:22])[CH3:21])[CH:5]=[CH:4][CH:3]=[CH:2]1.C(O)COCCO.O.NN.[OH-].[K+]>O.C(OCC)(=O)C>[CH3:21][C:13]1([CH3:22])[CH2:14][CH2:15][CH2:16][C:17]([CH3:18])([CH3:19])[P:12]1[C:7]1[CH:8]=[CH:9][CH:10]=[CH:11][C:6]=1[N:1]1[CH:5]=[CH:4][CH:3]=[CH:2]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 8117Diethylene GlycolHCID 14797Potassium HydroxideHCID 24654Hydrazine hydrate (1:1)HCID 58067311HCID 58067311, 화합물

생성물 1

HCID 666785411-(2-(2,2,6,6-Tetramethylphosphinan-1-yl)phenyl)-1H-pyrrole수율 97%

시약·촉매·용매 2

HCID 962Water
용매
HCID 8857Ethyl Acetate용매

반응 조건

온도
210 °C

실험 절차

A round bottom flask was charged with 1-(2-(1H-pyrrol-1-yl)phenyl)-2,2,6,6-tetramethylphosphinan-4-one (878 mg, 2.80 mmol, 1.0 equiv) and purged with nitrogen for 15 minutes. Then nitrogen-sparged diethylene glycol (14.7 mL, 154 mmol, 55 equiv) was added and the flask was equipped with a Claisen adapter and a Dean-Stark trap. The flask was further charged with hydrazine hydrate (1.24 mL, 14.0 mmol, 5 equiv, 55 wt% hydrazine) and potassium hydroxide (786 mg, 14.) mmol, 5 equiv), and the mixture was immersed in an oil bath at 60 ° C. The temperature of the bath was gradually increased to 210 ° C. over 1 hour and kept at that temperature for 7 hours. The reaction mixture was cooled to room temperature under a positive pressure of nitrogen and then diluted with water (50 mL) and ethyl acetate (20 mL). The phases were partitioned, and the organic layer was collected. The aqueous layer was washed with ethyl acetate (4×20 mL), and the combined organic fractions were washed once with aqueous saturated sodium chloride, dried over sodium sulfate, filtered, and concentrated on a rotary evaporator to afford the title compound as a pale yellow solid (811 mg, 91 area % by HPLC, 97% yield). NMR (400 MHz, CDCl3) δ ppm 7.96-7.83 (m, 1H), 7.35-7.22 (m, 2H), 7.22- 7.17 (m, 1H), 6.72 -6.66 (m, 2H), 6.20 (t, J=2.1 Hz, 2H), 1.87-1.71 (m, 2H), 1.71-1.56 (m, 2H), 1.50-1.33 (m, 2H), 1.11 (s, 3H), 1.06 (s, 3H), 0.76 (d, J=9.7 Hz, 6H). 13C NMR (100 MHz, CDCl3) δ ppm 149.4-146.8 (m), 134.7 (d, J=4 Hz), 129.0, 127.8 (d, J=3 Hz), 126.5, 123.3 (d, J=3 Hz), 107.9, 37.6, 31.4, 31.1, 30.2 (d, J=7 Hz), 29.6 (d, J=18 Hz), 20.5. 31P NMR (CDCl3, 202 MHz) δ ppm -7.6 (s).

후처리

  1. custompurged with nitrogen for 15 minutes
  2. additionwas added
  3. customthe flask was equipped with a Claisen adapter
  4. customwas immersed in an oil bath at 60 ° C
  5. temperatureThe reaction mixture was cooled to room temperature under a positive pressure of nitrogen
  6. customThe phases were partitioned
  7. customthe organic layer was collected
  8. washThe aqueous layer was washed with ethyl acetate (4×20 mL)
  9. washthe combined organic fractions were washed once with aqueous saturated sodium chloride
  10. dry with materialdried over sodium sulfate
  11. filtrationfiltered
  12. concentrationconcentrated on a rotary evaporator

출처 및 근거

ORD 기록
ord-c64ab65f55bc4d3990f778fc5e4437b2
출처 데이터셋
uspto-grants-2015_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09200021B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트