홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Iodine → 2-Fluoro-3-iodo-4-methylbenzonitrile

HRID 1502433
인쇄

반응식

HRID 1502433 반응식
CC1(C)CCCC(C)(C)N1.O1CCCC1.C([Li])CCC.[F:21][C:22]1[CH:29]=[C:28]([CH3:30])[CH:27]=[CH:26][C:23]=1[C:24]#[N:25].[I:31]I.S([O-])([O-])(=O)=S.[Na+].[Na+]>O>[F:21][C:22]1[C:29]([I:31])=[C:28]([CH3:30])[CH:27]=[CH:26][C:23]=1[C:24]#[N:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 6

HCID 807IodineHCID 8028Tetrahydrofuran3회HCID 130352,2,6,6-TetramethylpiperidineHCID 24477Sodium ThiosulfateHCID 27784432-Fluoro-4-methylbenzonitrileHCID 178418339Butyllithium

생성물 1

HCID 59383898
2-Fluoro-3-iodo-4-methylbenzonitrile

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
-78 °C

실험 절차

To a mixture of 2,2,6,6-tetramethyl-piperidine (4.50 mL, 26.6 mmol) and tetrahydrofuran (40 mL, 500 mmol) at −78° C. was slowly added n-butyllithium (2.5 mol/L in hexane, 11.5 mL, 28.8 mmol). The reaction vessel was transferred to a 0° C. ice bath for 60 minutes and then recooled at −78° C. 2-fluoro-4-methylbenzonitrile (3.1095 g, 23.010 mmol) as a solution in tetrahydrofuran (20 mL, 200 mmol) was then slowly added. The reaction mixture was stirred at −78° C. for 2 hours, and then a solution of iodine (7.33 g, 28.9 mmol) in tetrahydrofuran (10 mL, 100 mmol) was slowly added and then the reaction mixture was allowed to warm to room temperature. After 1.5 hours the reaction mixture was poured into a solution of sodium thiosulfate (20 g) in water (40 mL) and stirred at room temperature for 15 minutes. The layers were separated, and the aqueous layer extracted with ethyl acetate. The organic layers were combined, dried over MgSO4, filtered, and evaporated in vacuo. The crude product was purified via flash chromatography on silica gel (80 g silica, solvent gradient 0-10% ethyl acetate in heptanes) to yield a mixture of regioisomeric products, with the desired product as the major component (3.9385 g, 76% pure). LCMS (ESI): M+H=262.1; 1H NMR (400 MHz, CDCl3) δ 7.51-7.44 (m, 1H), 7.14 (d, J=7.9 Hz, 1H), 2.56 (s, 3H).

후처리

  1. customwas transferred to a 0° C.
  2. customfor 60 minutes
  3. customrecooled at −78° C
  4. temperatureto warm to room temperature
  5. stirringstirred at room temperature for 15 minutes
  6. customThe layers were separated
  7. extractionthe aqueous layer extracted with ethyl acetate
  8. dry with materialdried over MgSO4
  9. filtrationfiltered
  10. customevaporated in vacuo
  11. customThe crude product was purified via flash chromatography on silica gel (80 g silica, solvent gradient 0-10% ethyl acetate in heptanes)
  12. customto yield
  13. additiona mixture of regioisomeric products

출처 및 근거

ORD 기록
ord-00669ff3e707401f9f08651a985ae94b
출처 데이터셋
uspto-grants-2015_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09206175B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트