홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Magnesium Acetate → Magnesium Acetate Tetrahydrate

HRID 1577900
인쇄

반응식

HRID 1577900 반응식
[C:1]([O-:4])(=[O:3])[CH3:2].[Mg+2:5].[C:6]([O-:9])(=[O:8])[CH3:7]>O>[OH2:3].[OH2:8].[OH2:3].[OH2:3].[C:1]([O-:4])(=[O:3])[CH3:2].[Mg+2:5].[C:6]([O-:9])(=[O:8])[CH3:7].[O-2:3].[Mg+2:5]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 8896Magnesium Acetate2회

생성물 2

HCID 134717Magnesium Acetate TetrahydrateHCID 6850729Magnesium monoxide

시약·촉매·용매 1

HCID 962Water용매

실험 절차

An aqueous solution of magnesium acetate tetrahydrate was prepared by adding one part by weight of the magnesium acetate compound to five parts by weight of water. A glassware article (bottle) was heated to provide a surface temperature of about 640° C. The solution of magnesium acetate was sprayed at a flow rate of about 0.5 grams per second while the glassware was rotated upon a turntable at 78 rpm. Approximately 16 revolutions of the glassware bottle occurred during an application. A clear, transparent coating of magnesium oxide was formed on the bottle. Thereafter, when the glassware had cooled to 120° C., a commercial "cold end" coating, i.e., GLAS-LUBE 1000 available from Crown Chemical Company, diluted by a factor of 100 by weight in distilled water was sprayed at the rate of 1 gram of "cold end" coating solution per second for a period of 5 revolutions of the glassware on the turntable as discussed above. The thus coated article with both "hot end" and "cold end" coatings was tested for lubrication both wet and dry. Under both conditions lubrication was found to be excellent when two such glassware articles were manually rubbed together.

후처리

  1. temperatureA glassware article (bottle) was heated
  2. customto provide a surface temperature of about 640° C

출처 및 근거

ORD 기록
ord-a9a5533de78a4184a584d675f462ea1c
출처 데이터셋
uspto-grants-1981_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04289816

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트