홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Glycerol → Octadienyl glyceryl ether

HRID 1633833
인쇄

반응식

HRID 1633833 반응식
[OH:1][CH2:2][CH:3]([CH2:5][OH:6])[OH:4].O.[CH2:8]=[CH:9][CH:10]=[CH2:11]>CCCCCCCC.C/C(/[O-])=C/C(C)=O.C/C(/[O-])=C/C(C)=O.[Pd+2]>[CH2:2]([O:1][CH:8]=[CH:9][CH:10]=[CH:11][CH2:8][CH2:9][CH2:10][CH3:11])[CH:3]([CH2:5][OH:6])[OH:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 753GlycerolHCID 962Water2회HCID 78451,3-Butadiene

생성물 1

HCID 54098056Octadienyl glyceryl ether수율 69.6%

시약·촉매·용매 2

HCID 5486778Palladium acetylacetonate촉매HCID 356Octane용매

반응 조건

온도
80 °C

실험 절차

In a 500-mL autoclave, charged were 70 g (0.76 mol) of glycerin, 0.7 g (2.3 mmol) of bis(acetylacetonato)palladium (II), 2.7 g (5.0 mmol) of triphenylphosphine-2,2′-disulfonic acid dipotassium salt dihydrate and 35 g of water. The mixture was heated to 80° C., whereby a water-soluble liquid phase was obtained. After cooling, a hydrocarbon solvent phase containing 100 g (1.85 mol) of 1,3-butadiene dissolved in 100 g of n-octane was introduced at a time into the autoclave. While stirring, the mixture was heated to 80° C. again. The initial pressure in the autoclave showed 0.9 Mpa. After stirring at 80° C. for 12 hours, the water phase and unreacted butadiene were removed. The residue was washed with water and n-octane was removed, whereby 106 g of octadienyl glyceryl ether was obtained as a pale yellow transparent oil.

후처리

  1. additionIn a 500-mL autoclave, charged
  2. temperatureAfter cooling
  3. additionwas introduced at a time into the autoclave
  4. temperaturethe mixture was heated to 80° C. again
  5. stirringAfter stirring at 80° C. for 12 hours
  6. customthe water phase and unreacted butadiene were removed
  7. washThe residue was washed with water and n-octane
  8. customwas removed

출처 및 근거

ORD 기록
ord-35153977a99e4cc3a63809e6cb0b68ae
출처 데이터셋
uspto-grants-2003_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06504063B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트