홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Butyl Methacrylate → Methyl Methacrylate

HRID 1649571
인쇄

반응식

HRID 1649571 반응식
C1N(P(N2CC2)(N[C:7]([C:9]2[C:14](I)=[CH:13][CH:12]=[CH:11][CH:10]=2)=O)=O)C1.[C:19]([O:24][CH2:25]CCC)(=[O:23])[C:20]([CH3:22])=[CH2:21]>O>[CH2:19]=[CH:7][C:9]1[CH:10]=[CH:11][CH:12]=[CH:13][CH:14]=1.[C:19]([O:24][CH3:25])(=[O:23])[C:20]([CH3:22])=[CH2:21]
참가 물질실험 절차출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 7354Butyl MethacrylateHCID 197801Iodobenzotef

생성물 2

HCID 6658Methyl MethacrylateHCID 7501Styrene

시약·촉매·용매 1

HCID 962Water용매

실험 절차

50 g of deionized water and 211 g of Aerosol A-103 (34% solid content) are mixed in a 3 liter, four-neck resin kettle and mechanically stirred for 30 minutes under the atmosphere of nitrogen gases. The monomer mixture is obtained by the addition of 585 g of styrene 225 g of butyl methacrylate, and 90 g of methyl methacrylate in a 2 liter Erlermeyer flask with magnetic stirring. 168 g this monomer mixture is then slowly added into the 3 liter resin kettle within a one hour period through a 250 ml separatory funnel with a drop-regulator (FIGS. 1, 2 and 3). After the addition of 20 ml of 20% aqueous ammonium persulfate (containing 8% aerosol A-103) and 20 ml of 20% sodium metabisulfite(containing 8% aerosol A-103) the temperature is raised to 70° C. The rest of the monomer mixture, 732 g, is then slowly added to the reaction emulsion within 5 hours period while bubbling of nitrogen gases and mechanical stirring (400 rpm) are continuing. The polymerization is completed after heating the reaction mixture for 1.5 hours at 75° C. The final product is slowly cooled to room temperature. An emulsion polymer is obtained with a weight of 1200 g. This emulsion polymer have solid content around 74%.

출처 및 근거

ORD 기록
ord-30db7ed67fab4ce194226f0defbd525d
출처 데이터셋
uspto-grants-1983_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04418183

반응 노트

이 페이지에서참가 물질실험 절차출처 및 근거반응 노트