홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Octene → Octene-1 7-methyl-1,6-octadiene

HRID 1707723
인쇄

반응식

HRID 1707723 반응식
[CH3:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8]CC.CCCCCCC=C.[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26].[H][H].C([Al](CC(C)C)CC(C)C)C(C)C.C[Si](C)(C)OCC>[Ti].CO.C(O)C(C)C>[CH3:8][CH2:7][CH2:6][CH2:5][CH2:4][CH2:3][CH:2]=[CH2:1].[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

10

반응물 6

HCID 81251-OcteneHCID 15600DecaneHCID 15772EthoxytrimethylsilaneHCID 5575797-Methyl-1,6-octadieneHCID 16682931TriisobutylaluminumHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 131718731Octene-1 7-methyl-1,6-octadiene

시약·촉매·용매 3

HCID 23963Titanium촉매HCID 887Methanol용매HCID 6560Isobutanol용매

실험 절차

A 500 ml polymerizer equipped with an agitating element was charged with 142 ml of decane, 100 ml of octene-1 and 8 ml of 7-methyl-1,6-octadiene. Into this solution elevated in temperature to 50° C. were introduced continuously hydrogen and nitrogen at rates of 1 liter and 50 liters per hour, respectively. The polymerizer was then charged with 0.625 mmol of triisobutylaluminum, 0.21 mmol of trimethylethoxysilane and 0.0125 mmol, in terms of titanium atom, of the solid titanium catalyst component [A] to initiate polymerization. After a thirty-minute polymerization at 50° C., the polymerization was stopped by the addition of small amounts of isobutyl alcohol to the system, and the resulting polymer solution was then poured in large amounts of methanol to separate out a copolymer. The copolymer was recovered and dried at 120° C. under reduced pressure overnight to give 12.4 g of octene-1/7-methyl-1,6-octadiene copolymer. The intrinsic viscosity [η], as measured in decahydronaphthalene at 135° C., of the thus obtained copolymer was 6.4 dl/g, and the content of 7-methyl-1,6-octadiene in the copolymer was 6.6 mol %.

후처리

  1. customA 500 ml polymerizer equipped with an agitating element
  2. customelevated in temperature to 50° C.
  3. custompolymerization
  4. customAfter a thirty-minute polymerization at 50° C.
  5. customto separate out a copolymer
  6. customThe copolymer was recovered
  7. customdried at 120° C. under reduced pressure overnight

출처 및 근거

ORD 기록
ord-8e0383bbbd9c4b2a96c22c1b03c389eb
출처 데이터셋
uspto-grants-1994_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05354828

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트