홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 2-(2-Chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenylamine

HRID 1889947
인쇄

반응식

HRID 1889947 반응식
[C:1]([C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][C:4]=1[NH2:9])#[CH:2].C(N(CC)C(C)C)(C)C.Br[C:20]1[C:21]2[N:22]([N:26]=[C:27]([Cl:29])[N:28]=2)[CH:23]=[CH:24][CH:25]=1.Cl>CN(C)C=O.[Cu]I>[Cl:29][C:27]1[N:28]=[C:21]2[C:20]([C:2]#[C:1][C:3]3[CH:8]=[CH:7][CH:6]=[CH:5][C:4]=3[NH2:9])=[CH:25][CH:24]=[CH:23][N:22]2[N:26]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 81531DiisopropylethylamineHCID 41539052-EthynylanilineHCID 674813708-Bromo-2-chloro-[1,2,4]triazolo[1,5-a]pyridine

생성물 1

HCID 674790482-(2-Chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenylamine

시약·촉매·용매 2

HCID 24350
Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)
촉매
HCID 6228Dimethylformamide용매

실험 절차

189 a) To a mixture of 2-ethynyl-phenylamine (126.0 mg, 1.075 mmol) and N,N-diisopropylethylamine (2 mL, 10 mmol) in N,N-dimethylformamide (1 mL) at room temperature under an atmosphere of nitrogen was added 8-bromo-2-chloro-[1,2,4]triazolo[1,5-a]pyridine (250.0 mg, 1.075 mmol), bBis(triphenylphosphine)palladium(II) chloride (10.0 mg, 0.0142 mmol) and copper(I) iodide (7.0 mg, 0.037 mmol). The mixture was stirred at room temperature for 18 hours then was poured into 0.1N hydrochloric acid (100 mL) and extracted with ethyl acetate (3×30 mL). The combined organic layers were washed with water (2×20 mL) and saturated aqueous sodium chloride (20 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified using preparatory silica gel plates (20 cm×20 cm 100% dichloromethane). 2-(2-Chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenylamine was isolated as a yellow solid (0.158 g, 55%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.43 (d, J=6.7 Hz, 1H), 7.66 (d, J=7.4 Hz, 1H), 7.39 (d, J=7.7 Hz, 1H), 7.19 (t, J=7.8 Hz, 1H), 7.07 (t, J=7.0 Hz, 1H), 6.77-6.67 (m, 2H), 4.81 (br s, 2H). MS=269, 271 (MH)+. 189 b) To a cooled solution of 2-(2-chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenylamine (840.0 mg, 3.126 mmol) and N,N-diisopropylethylamine (2.8 mL, 16 mmol) in 1,2-dichloroethane (10 mL) in a ice/water bath at 5° C. was added dropwise methanesulfonyl chloride (0.64 mL, 8.2 mmol). The mixture was stirred 1 hour at 5° C. then at room temperature overnight. 0.1N hydrochloric acid (50 mL) was added to reaction mixture, stirred for 20 minutes then extracted with ethyl acetate (3×50 mL). The combined organic layers were washed with water (50 mL) and saturated aqueous sodium chloride (50 mL), dried over magnesium sulfate, filtered and evaporated to a tan solid (1.34 g). To a suspension of the tan solid (1.34 g) from in tetrahydrofuran (10 mL,) was added 1.0 M of tetra-n-butylammonium fluoride in tetrahydrofuran (12.50 mL, 12.50 mmol). The mixture was stirred at room temperature for 18 hours. The volatiles were evaporated to yield a viscous oil. Hydrochloric acid (2N, 30 mL) was added to viscous oil and stirred then was extracted with ethyl acetate (3×50 mL). The combined organic layers were dried over magnesium sulfate, filtered and evaporated. The residue was purified via chromatography (silica gel column 40 g 20%→100% ethyl acetate:hexane). N-[2-(2-Chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenyl]-methanesulfonamide was isolated as a tan solid (0.90 g, 83%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.50 (d, J=6.7 Hz, 1H), 7.93 (br s, 1H), 7.75 (d, J=8.4 Hz, 1H), 7.71 (d, J=7.3 Hz, 1H), 7.57 (d, J=7.8 Hz, 1H), 7.44 (t, J=7.9 Hz, 1H), 7.19 (t, J=7.8 Hz, 1H), 7.11 (t, J=7.1 Hz, 1H), 3.17 (s, 3H). MS=347, 349 (MH)+. 189 c) To a suspension of N-[2-(2-chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenyl]-methanesulfonamide (900.0 mg, 2.595 mmol) and cesium carbonate (950.0 mg, 2.916 mmol) in acetonitrile (5 mL) was added iodomethane (0.25 mL, 4.0 mmol). The reaction flask was capped and the mixture was stirred at room temperature over weekend. The volatiles were evaporated. The recovered solid was triturated with water (30 mL), filtered and rinsed with water then was dissolved in dichloromethane (50 mL) and was separated. The organic layer was dried over magnesium sulfate, filtered and evaporated. N-[2-(2-Chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenyl]-N-methyl-methanesulfonamide was isolated as a tan solid (0.871 g, 93%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.51 (d, J=6.7 Hz, 1H), 7.78 (d, J=7.4 Hz, 1H), 7.68 (d, J=7.6 Hz, 1H), 7.52 (d, J=7.8 Hz, 1H), 7.46 (t, J=7.4 Hz, 1H), 7.38 (t, J=7.5 Hz, 1H), 7.10 (t, J=7.1 Hz, 1H), 3.54 (s, 3H), 3.21 (s, 3H). MS=361, 363 (MH)+. 189 d) N-Methyl-N-(2-{2-[4-(4-methyl-piperazin-1-yl)-phenylamino]-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl}-phenyl)-methanesulfonamide was prepared from N-[2-(2-chloro-[1,2,4]triazolo[1,5-a]pyridin-8-ylethynyl)-phenyl]-N-methyl-methanesulfonamide (125.0 mg, 0.3464 mmol) and 4-(4-methyl-piperazin-1-yl)-phenylamine (73.0 mg, 0.382 mmol) with 2,2′-bis-dicyclohexylphosphanyl-biphenyl (37.0 mg, 0.0677 mmol) as the ligand in a manner analogous to Example 2d. Product isolated as a yellow foam (0.138 g, 77%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.40 (d, J=6.6 Hz, 1H), 7.65 (d, J=7.6 Hz, 1H), 7.61 (d, J=7.4 Hz, 1H), 7.55-7.48 (m, 3H), 7.43 (t, J=7.5 Hz, 1H), 7.37 (t, J=7.5 Hz, 1H), 7.00 (d, J=7.7 Hz, 2H), 6.86 (t, J=7.0 Hz, 1H), 6.73 (s, 1H), 3.61 (s, 3H), 3.23-3.16 (m, 7H), 2.63-2.58 (m, 4H), 2.37 (s, 3H). MS=516 (MH)+.

후처리

  1. extractionextracted with ethyl acetate (3×30 mL)
  2. washThe combined organic layers were washed with water (2×20 mL) and saturated aqueous sodium chloride (20 mL)
  3. dry with materialdried over magnesium sulfate
  4. filtrationfiltered
  5. customevaporated
  6. customThe residue was purified

출처 및 근거

ORD 기록
ord-a530a07a14da4581839a3eb1a8b754de
출처 데이터셋
uspto-grants-2013_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08501936B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트