홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Pyridine → 3-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid

HRID 1931467
인쇄

반응식

HRID 1931467 반응식
F[C:2]([N:7]([CH3:9])C)(F)[CH:3]([F:5])[F:4].B(F)(F)F.[N:14]1C=CC=C[CH:15]=1.CO[CH:22]=[CH:23][C:24]([O:26]C)=[O:25].[OH-].[Na+].[CH3:30][NH:31]N>C(OCC)C.O1CCOCC1.O>[F:5][CH:3]([F:4])[C:2]1[C:23]([C:24]([OH:26])=[O:25])=[CH:22][N:14]([CH3:15])[N:7]=1.[F:4][CH:3]([F:5])[C:2]1[N:7]([CH3:9])[N:31]=[CH:30][C:23]=1[C:24]([OH:26])=[O:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

11

반응물 6

HCID 1049PyridineHCID 6061MethylhydrazineHCID 6356Boron trifluoride2회HCID 14798Sodium HydroxideHCID 2724617Methyl 3-methoxyprop-2-enoateHCID 21945697Ethanamine, 1,1,2,2-tetrafluoro-N,N-dimethyl-

생성물 2

HCID 18983008
3-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid
HCID 509890165-(Difluoromethyl)-1-methyl-1H-pyrazole-4-carboxylic acid

시약·촉매·용매 3

HCID 962Water용매2회HCID 3283Diethyl Ether용매HCID 312751,4-Dioxane용매

반응 조건

온도
60 °C

실험 절차

To a solution of 1,1,2,2-tetrafluoroethyldimethylamine (30 g, 207 mmol) in diethyl ether (90 ml) and dioxane (90 ml) was added dropwise, under a nitrogen atmosphere, at a temperature of from 0 to 5° C., a solution of BF3-etherate (49% BF3, 59.6 ml, 420 mmol). After the addition had ended, the reaction mixture was stirred for 5 min. Subsequently, pyridine (15.9 g, 201 mmol) and methyl 3-methoxyacrylate (22.3 g, 186 mmol) were successively added dropwise to the reaction mixture at a temperature of from 0 to 5° C. After stirring for 6 hours, a greasy solid formed, from which the supernatant solution was decanted off and discarded. The solid was then added at a temperature of from 0 to 5° C. to a mixture of sodium hydroxide (41.4 g, 1.035 mol) and methylhydrazine (38.6 g of a 35% aqueous solution, 288 mmol) in water (665 ml) and then stirred at room temperature for 1 h. Subsequently, the reaction mixture was heated to 60° C. and stirred at this temperature for 0.5 h. The reaction mixture was freed of volatile constituents. The resulting residue was taken up in water (50 ml), washed with ethyl acetate and then brought to a pH of 2 with conc. hydrochloric acid. The solid precipitated at a temperature of 0° C. was isolated by filtration, washed with a little ice-cold water and dried under reduced pressure at a temperature of 40° C. 3-Difluoromethyl-1-methylpyrazole-4-carboxylic acid was obtained as a mixture with 5-difluoromethyl-1-methylpyrazole-4-carboxylic acid with a ratio of 85:15 in an amount of 10.1 g.

후처리

  1. additionAfter the addition
  2. stirringAfter stirring for 6 hours
  3. customa greasy solid formed, from which the supernatant solution
  4. customwas decanted off
  5. stirringstirred at room temperature for 1 h
  6. stirringstirred at this temperature for 0.5 h
  7. washwashed with ethyl acetate
  8. customThe solid precipitated at a temperature of 0° C.
  9. customwas isolated by filtration
  10. washwashed with a little ice-cold water
  11. customdried under reduced pressure at a temperature of 40° C

출처 및 근거

ORD 기록
ord-6e3a9bfdce81485d9371c31b5c941269
출처 데이터셋
uspto-grants-2012_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08188295B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트