홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium borohydride → Diethyl 4-(4-chloro-2-aminobenzoyl)-1H-pyrazole-3,5-dicarboxylate

HRID 1954730
인쇄

반응식

HRID 1954730 반응식
[BH4-].[Na+].[Cl:3][C:4]1[CH:26]=[CH:25][C:7]([C:8]([C:10]2[C:11]([C:20]([O:22][CH2:23][CH3:24])=[O:21])=[N:12][NH:13][C:14]=2[C:15]([O:17][CH2:18][CH3:19])=[O:16])=[O:9])=[C:6]([N+:27]([O-])=O)[CH:5]=1>O.Cl.C([O-])(=O)C.[Ni+2].C([O-])(=O)C>[Cl:3][C:4]1[CH:26]=[CH:25][C:7]([C:8]([C:10]2[C:14]([C:15]([O:17][CH2:18][CH3:19])=[O:16])=[N:13][NH:12][C:11]=2[C:20]([O:22][CH2:23][CH3:24])=[O:21])=[O:9])=[C:6]([NH2:27])[CH:5]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 4311764Sodium borohydrideHCID 18358912diethyl 4-(4-chloro-2-nitrobenzoyl)-1H-pyrazole-3,5-dicarboxylate

생성물 1

HCID 18358868Diethyl 4-(4-chloro-2-aminobenzoyl)-1H-pyrazole-3,5-dicarboxylate수율 96.5%

시약·촉매·용매 3

HCID 9756Nickel Acetate촉매HCID 313Hydrochloric Acid용매
HCID 962
Water
용매
2회

반응 조건

온도
8 °C

실험 절차

Alternatively, the title compound can be prepared as follows: A mixture of nickel acetate (444 g, 1.78 moles) and water (6.6 L) was cooled to 8° C. with stirring under nitrogen: then a solution of sodium borohydride (271 g, 7.16 moles) in water (3.55 L) was added dropwise over 1.5 hours maintaining the reaction temperature between 8° C. and 12° C. The reaction mixture was then stirred for 1.5 hours at 8-12° C. The reaction mixture was filtered through a coarse scintered glass filter funnel, keeping, the black filter cake wet (Caution: this black powder may be pyrophoric if allowed to dry). The filter cake was washed first with water (6×2 L), then with ethanol (2×2 L) and finally with methanol (1 L). The methanol wet filter cake (Ni2B, pyrophoric) was transferred to a 22 L flask with methanol (8 L). A solution of diethyl 4-(4-chloro-2-nitrobenzoyl)-1H-pyrazole-3,5-dicarboxylate (111.0 g, 0.28 mole) in hydrochloric acid (2.52 L) was added. The reaction mixture was heated to 64° C. and was kept at 64° C. for 6 hours; then was allowed to cool to room temperature and was filtered through CELITE™. The CELITE™ layer was washed with methanol (2×2 L). The filtrate and wash liquors were combined and the methanol was distilled off under water aspirator vacuum. Water (1 L) was added to the reaction and the mixture was filtered. The filter cake was washed with water (2×500 mL) and dried under vacuum at 40° C. to give the title compound as a yellowish solid (98.81 g, 96%).

후처리

  1. temperaturemaintaining the reaction temperature between 8° C. and 12° C
  2. stirringThe reaction mixture was then stirred for 1.5 hours at 8-12° C
  3. filtrationThe reaction mixture was filtered through a coarse scintered glass
  4. filtrationfilter funnel
  5. customto dry)
  6. washThe filter cake was washed first with water (6×2 L)
  7. customThe methanol wet filter cake (Ni2B, pyrophoric) was transferred to a 22 L flask with methanol (8 L)
  8. temperatureThe reaction mixture was heated to 64° C.
  9. temperatureto cool to room temperature
  10. filtrationwas filtered through CELITE™
  11. washThe CELITE™ layer was washed with methanol (2×2 L)
  12. washThe filtrate and wash liquors
  13. distillationthe methanol was distilled off under water
  14. additionWater (1 L) was added to the reaction
  15. filtrationthe mixture was filtered
  16. washThe filter cake was washed with water (2×500 mL)
  17. customdried under vacuum at 40° C.

출처 및 근거

ORD 기록
ord-3e4d0e937696433a8cd111079ac62962
출처 데이터셋
uspto-grants-2000_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06124281

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트