홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phenol → 2,3-Bis(1-phenylethyl)phenol

HRID 2049815
인쇄

반응식

HRID 2049815 반응식
[C:1]1([OH:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[CH2:8]=[CH:9][C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1>>[C:10]1([CH:9]([C:3]2[C:2]([CH:9]([C:10]3[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=3)[CH3:8])=[C:1]([OH:7])[CH:6]=[CH:5][CH:4]=2)[CH3:8])[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1.[C:10]1([CH:9]([C:2]2[CH:3]=[C:4]([CH:9]([C:10]3[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=3)[CH3:8])[CH:5]=[C:6]([CH:9]([C:10]3[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=3)[CH3:8])[C:1]=2[OH:7])[CH3:8])[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 996Phenol2회HCID 7501Styrene2회

생성물 2

HCID 866882,4,6-Tris(1-phenylethyl)phenol수율 27%HCID 190103942,3-Bis(1-phenylethyl)phenol수율 56%

실험 절차

A suspension of 94 parts of phenol, 208 parts of styrene and 5 parts of ion exchange resin is prepared in a stirred reactor at 80° C. and 1 bar pressure, the mixture being stirred at 700 rpm. The ion exchange resin is a sulfonated styrene/divinylbenzene copolymer resin, which has been dehydrated under reduced pressure for 20 hours at 100° C. before being used; it has a gel structure and its particle size is from 20 to 150 micrometers. The suspension is then stirred constantly in the reactor at 700 rpm. After 10 hours, 4.7 parts of phenol and 10.4 parts of styrene are introduced per hour at 80° C. and 1 bar pressure and correspondingly 15.1 parts per hour of suspension are filtered through a suction line equipped with a metal filter (pore diameter 10 micrometers) and are subjected to fractional distillation. After 100 hours' operation, 248 parts of 4-mono-(α-phenylethyl)-phenol (13% of theory, based on starting material II) of boiling point 182°-189° C./13 millibars, 845 parts (56% of theory, based on starting material II) of 2,4-di-(α-phenylethyl)-phenol of boiling point 231°-235° C./6 millibars and 366 parts (27% of theory, based on starting material II) of 2,4,6-tri-(α-phenylethyl)-phenol of boiling point 260°-268° C./6 millibars are obtained. The conversion is 98%, based on phenol, or 97%, based on starting material II.

후처리

  1. customis prepared in a stirred reactor at 80° C.
  2. stirringThe suspension is then stirred constantly in the reactor at 700 rpm
  3. waitAfter 10 hours
  4. filtration1 bar pressure and correspondingly 15.1 parts per hour of suspension are filtered through a suction line
  5. customequipped with a metal
  6. filtrationfilter (pore diameter 10 micrometers)
  7. distillationare subjected to fractional distillation

출처 및 근거

ORD 기록
ord-0d14234d4e5847d2ae3c5a49b278ca53
출처 데이터셋
uspto-grants-1980_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04198531

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트