홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitrogen → methyl [5-(4-fluorobenzyl)-3-pyridin-4-yl-1H-pyrazol-1-yl]acetate

HRID 2074081
인쇄

반응식

HRID 2074081 반응식
N#N.[F:3][C:4]1[CH:21]=[CH:20][C:7]([CH2:8][C:9]2[NH:13][N:12]=[C:11]([C:14]3[CH:19]=[CH:18][N:17]=[CH:16][CH:15]=3)[CH:10]=2)=[CH:6][CH:5]=1.[H-].[Na+].Br[CH2:25][C:26]([O:28][CH3:29])=[O:27]>C1COCC1>[F:3][C:4]1[CH:21]=[CH:20][C:7]([CH2:8][C:9]2[N:13]([CH2:25][C:26]([O:28][CH3:29])=[O:27])[N:12]=[C:11]([C:14]3[CH:19]=[CH:18][N:17]=[CH:16][CH:15]=3)[CH:10]=2)=[CH:6][CH:5]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 947NitrogenHCID 24758Sodium hydrideHCID 60984Methyl bromoacetateHCID 247947454-(5-(4-Fluorobenzyl)-1H-pyrazol-3-yl)pyridine

생성물 1

HCID 68360279methyl [5-(4-fluorobenzyl)-3-pyridin-4-yl-1H-pyrazol-1-yl]acetate수율 47.5%

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매

반응 조건

온도
5 °C

실험 절차

A 22 liter, three-neck, round bottom flask equipped with a mechanical stirrer, Claisen adapter with a thermocouple and N2 inlet adapter, and a 250 ml addition funnel was charged with THF (10 L), and 4-[5-(4-fluorobenzyl)-1H-pyrazol-3-yl]pyridine (385.5 g, 1.52 mol). The resulting solution was cooled to 5° C. using a water/ice/salt bath. Sodium hydride (60% dispersion in mineral oil, 66.9 g, 1.67 mol) was then added in several portions at such that the internal temperature did not exceed 15° C. The resulting red mixture was stirred at 5° C. for 1.5 hours. Methyl bromoacetate (254 g, 1.67 mol) was then added drop-wise at such a rate that the temperature did not exceed 15° C. The mixture was then allowed to slowly reach room temperature overnight. The mixture was then filtered through celite, and the celite was washed with ethyl acetate. The majority of the THF was removed by rotary evaporation. Ethyl acetate (4 L) and water (4 L) were then added. The layers were separated and the aqueous layer was extracted with ethyl acetate (2×3 L). The combined organic layers were washed with brine, dried (Na2SO4), filtered and concentrated. The mixture of isomers (80:20 by GC-MS) was then eluted through silica gel using 100% ethyl acetate. The fractions that contained the isomers were concentrated and the solid suspended in ether (3 L). After heating to boiling, ethyl acetate (2 L) was added until the solid dissolved, followed by hexanes (4 L). After cooling overnight, the solid was filtered and dried under reduced vacuum to give the title compound as a red solid (235 g, 47%). 1H NMR (400 MHz, CD2Cl2) δ ppm 8.56 (d, 2 H) 7.61 (d, 2 H) 7.20 (t, 2 H) 7.03 (t, 2 H) 6.42 (s, 1 H) 4.86 (s, 2 H) 3.96 (s, 2 H) 3.71 (s, 3 H); m/z (APCI+) for C18H16N3O2F 326.1 (M+H)+.

후처리

  1. customA 22 liter, three-neck, round bottom flask equipped with a mechanical stirrer
  2. customdid not exceed 15° C
  3. customdid not exceed 15° C
  4. customwas then allowed to slowly reach room temperature overnight
  5. filtrationThe mixture was then filtered through celite
  6. washthe celite was washed with ethyl acetate
  7. customThe majority of the THF was removed by rotary evaporation
  8. additionEthyl acetate (4 L) and water (4 L) were then added
  9. customThe layers were separated
  10. extractionthe aqueous layer was extracted with ethyl acetate (2×3 L)
  11. washThe combined organic layers were washed with brine
  12. dry with materialdried (Na2SO4)
  13. filtrationfiltered
  14. concentrationconcentrated
  15. additionThe mixture of isomers (80:20 by GC-MS)
  16. washwas then eluted through silica gel using 100% ethyl acetate
  17. concentrationwere concentrated
  18. temperatureAfter heating to boiling, ethyl acetate (2 L)
  19. additionwas added until the solid
  20. dissolutiondissolved
  21. temperatureAfter cooling overnight
  22. filtrationthe solid was filtered
  23. customdried under reduced vacuum

출처 및 근거

ORD 기록
ord-cd3d021643e145c1b0fd7a5d565f4cef
출처 데이터셋
uspto-grants-2011_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07919488B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트